Janam Technologies XG200 User Manual

XG200 Android 7.1.2 User Manual



XG200 series

User Manual

For Android™ 7.1.2

Google, Android, Google Play and other marks are trademarks of Google LLC.



1

XG200 Android 7.1.2 User Manual

User Manual

Please note your phone is battery-embedded design with removable battery and battery cover. Unauthorized
personnel are strictly prohibited from disassembling the phone. Make sure to use only the power adapter (5V
2A Output AC/DC) that came with XG200.

In case your phone does not work as expected, you are strongly recommended to restart it by pressing and
holding the power button for at least 12 seconds until the startup screen appears. If your phone has
encountered a serious error and cannot be recovered, you should reset your phone to factory settings by using
the menu, either “Backup & Reset”, or “Factory Reset”. For more details, please refer to “Factory data reset”
section on page 49

This device can be operated in at least one Member State without infringing applicable requirements on the
use of radio spectrum.

Note:

1) Please be cautious while performing the factory data reset. Because this will erase personalized
settings and data saved in your phone, such as SMS, Contacts, Music, etc.

2) Battery

- Batteries should be stored at an ambient temperature of 20 ± 5 ℃ clean, dry and ventilated room,

should avoid contact with corrosive substances, should stay away from fire and heat; battery should be
charged one time every four months during storage.

- Warning and Dispose of properly in accordance with local regulations

PROTECT YOUR HEARING

To prevent possible hearing damage, do not listen at high volume
levels for long periods. Exercise caution when holding your device near
your ear while the loudspeaker is in use.

Rev 01

2

XG200 Android 7.1.2 User Manual

Table of Contents

User Manual ............................................................................................................................................................ 2

Table of Contents .................................................................................................................................................... 3

Getting Started ........................................................................................................................................................ 4

Major Parts .......................................................................................................................................................... 4

Accessary ............................................................................................................................................................ 6

Charge XG200 .................................................................................................................................................... 7

Turn On/Off XG200 ............................................................................................................................................. 9

Hot swap the battery ......................................................................................................................................... 10

Learning the basics ............................................................................................................................................... 11

Use a keypad .................................................................................................................................................... 11

Use a touch screen ........................................................................................................................................... 13

Setup Wizard ..................................................................................................................................................... 15

Home Screen, Apps and Widget ...................................................................................................................... 22

Status & Notifications Icons .............................................................................................................................. 31

Connect to your Wi-Fi network .......................................................................................................................... 32

Scanner Settings ................................................................................................................................................... 34

Use a Scanner ................................................................................................................................................... 34

Scan a Barcode ................................................................................................................................................. 43

OS Update ............................................................................................................................................................ 45

OS Image update from a Storage ..................................................................................................................... 45

OS Image update from the FOTA ..................................................................................................................... 47

Factory data reset ................................................................................................................................................. 49

Factory data reset from Settings ....................................................................................................................... 49

Force Factory data reset ................................................................................................................................... 51

RF…………………….…………………………………………………………………………………………………….54

FCC/IC Warning…….…………………………………………………………………………………………………….54

E-Label…………………………………………………………………………………………………………………….55



3

Getting Started

Major Pa r ts

XG200 Android 7.1.2 User Manual

Major Parts

Getting Started





1. LED Indicator

2. Touch Screen

3. Key pad

4

Getting Started

XG200 Android 7.1.2 User Manual

Major Parts

Getting Started

4. Scanner

5. Scanner trigger

6. Gun grip

7. Charging pad

8. Battery locker

9. Power key

10. USB port

Getting Started

5

XG200 Android 7.1.2 User Manual

Accessary

Accessary

Getting Started

AC/DC adapter Plug (US/ EU/ UK)

Li-ion battery (6500mAh)

Started

6

Charge XG200
Getting started

XG200 Android 7.1.2 User Manual

Charge XG200

Getting Started

1. Insert “Battery” into the gun grip and turn it to “Lock” position

Press battery lock button

7

XG200 Android 7.1.2 User Manual

Getting started

Charge XG200

Getting Started

2. Connect the AC/DC adaptor to your device and wall socket respectively 

3. LED indicator will display charging status.

Steady Red Battery is charging

Blinking Red Battery level is critical low

Steady Green Battery is fully charged

XG200 Battery Specification

Main Battery 6,500mAh / 3.63V

Backup Battery 60mAh / 3.7V

Charging time About 6.5 hours

Note: Always use an original charger and cable from the Janam. Other chargers and cables may damage
XG200. In addition, make sure connector, charger, cables are not wet.

8

Turn On/Off XG200
Getting Started

XG200 Android 7.1.2 User Manual

Turn On/Off XG200

Getting Started

Turn On

1. Press and hold the “Power Key” for a few seconds.

2. When XG200 enter to the boot mode, it will display “SMART BEYOND RUGGED” logo with short
vibration

3. Release the “Power Key” and wait until XG200 finish booting

Note: If you cannot turn on your XG200, try below steps

- To turn on XG200, battery needs to be charged certain level. Please charge first

- Press and hold the “Power key” for 12 seconds to force reboot

- Press and release the “Reset Hole” and then turn on XG200 again (Check)

Turn Off

1. Press and hold the “Power Key” until you see the power menu

2. Among the menu, tap “Power Off”

9

Hot swap the battery

XG200 Android 7.1.2 User Manual

Hot swap the battery



Getting Started

When battery level is low, you can replace the battery without turning off and on XG200.

Press battery lock button

- Remove the Battery and replace to another one.

- Make sure the battery is locked properly.

- Press the Power Key to use XG200 again.

10

Learning the basics

Use a keypad

XG200 Android 7.1.2 User Manual

Use a keypad

Power key



Scanner Triggers

Press

- Lock the screen / Light up the screen.

Press and hold

- Display the power menu “Power Off / Reboot / Airplane mode”

Press and hold for 12seconds

- Forced to reboot

Press the “Power” key and “Home Button” key together

- Screen capture

When “Scan Setting” is turned on

Learning the basics

- By pressing, XG200 scan the barcode.

11

Learning the basics

XG200 Android 7.1.2 User Manual

Using a keypad

Learning the basics

Numeric KeyPad



Recent Apps key

- Press to see recently used apps.

Home key

- From any apps or screens, press to return to the Home screen.

Back key

- Press to go back to the previous screen, or to close a dialog box, options menu, notification panel,

etc.

Numeric key

- Press to type numbers in the keypad

Yellow Key combination

- Press to type alphabet or special character

Blue Key combination

- Press to type function key (Blue color)

12

Learning the basics

Use a touch screen

XG200 Android 7.1.2 User Manual

Use a touch screen

Learning the basics

Touch

One-finger press

Double touch

One-finger press, lift, one-finger press, lift for “Zoom in”

Long press

One-finger press, wait, lift for “Select an item”

Drag, Swipe, or Fling

One-finger press, move, lift for “Scroll” or “Tilt”



Long-press drag

One-finger press, wait, move, lift for “Pick up and move” or “select multiple items”





13

Learning the basics

XG200 Android 7.1.2 User Manual

Use a touch screen

Learning the basics

Scroll

Vertical or horizontal swipe in a single direction

Pinch Open & Close

Two-finger press, move outwards and inwords, lift for “Zoom in and out”

Rotate

When XG200 is turning sideways, screen orientation is changing

14

XG200 Android 7.1.2 User Manual

Setup Wizard

Setup Wizard

When you power on your device very first time or boot after
factory reset, you need to setup your device

Language Selection

- Choose your language during setup process. Default
is English

Touch here to start setup your device

You can copy other device’s settings to your XG200 or
setup as a new device

Copy your data

- You can copy your settings from other Android
phone or Google account or iPhone

Set up as new

- Set your XG200 as your new device

Learning the basics

15

XG200 Android 7.1.2 User Manual

SetupWizard

Setup Wizard

Copy your data process

- Touch here to copy settings from your other devices

To copy your settings, please connect your XG200 to Wi-Fi
network

Learning the basics

16

XG200 Android 7.1.2 User Manual

d

Setup Wizard

Choose the device or cloud where you want to copy the
settings.

Learning the basics

17