Janam XM70 User Manual
XM70 Android User Manual
Technology at Work®
© 2016 Janam Technologies LLC. All rights reserved.
XM70 User Manual
ii
Janam Technologies LLC
Contents
1 INTRODUCTION 1-1
ABOUT THE JANAM XM70 1-1
FEATURE SUMMARY 1-1
HARDWARE OVERVIEW 1-2
2 GETTING STARTED 2-1
UNPACKING YOUR JANAM XM70 2-1
ATTACHING THE HANDSTRAP 2-1
CHARGING THE XM70 2-1
RESETTING THE XM70 2-1
USING THE PDA STYLE KEYPAD 2-2
EXTERNAL MICROSD CARD 2-3
TAKING SCREENSHOTS 2-3
3 SETTINGS 3-1
SOUND 3-1
DISPLAY (BRIGHTNESS) 3-1
BLUETOOTH 3-2
BATTERY 3-3
SECURITY 3-4
BACKUP AND RESET 3-4
4 BARCODE SCANNING 4-1
SCANWEDGE 4-1
5 INSTALLING APPLICATIONS 5-1
INSTALL APPLICATIONS USING USB CRADLE 5-1
INSTALLING APPLICATIONS USING MICROSD CARD 5-3
6 ECLIPSE ADB & WIRELESS CONFIGURATION 6-1
USING ECLIPSE ADB 6-1
WIRELESS CONFIGURATION 6-3
7 UPDATING THE ROM USING MICROSD CARD 7-1
UPDATING THE ROM USING THE MICROSD CARD 7-1
8 REGULATION AND MAINTENANCE 8-1
REGULATORY INFORMATION 8-1
FCC AND CANADIAN COMPLIANCE 8-1
CARE AND CLEANING OF TERMINALS 8-2
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) INFORMATION 8-2
BATTERY WARNING 8-2
GENERAL INFORMATION 8-3
OPERATING INSTRUCTIONS 8-3
XM70 User Manual
1-1
Janam Technologies LLC
1
Introduction
XM70 Rugged Mobile Computer
Designed to deliver maximum return on investment, the new XM70 provides support for Android™
and Microsoft Windows Embedded® Handheld 6.5 operating systems on the same device, allowing
customers to future-proof their technology investment and eliminate the costs associated with
forced application migration and expensive hardware upgrade. In addition, backward compatibility
with XM66 accessories allows Janam’s global customer base to reuse existing technology while
cost-effectively upgrading to the latest mobile computing platform.
Janam’s XM70 rugged mobile computer offers advanced 1D and 2D barcode scanning with Zebra’s
SE4500 scan engine. With extraordinary scanning speed and outstanding motion tolerance, the
XM70 improves productivity across a broad array of industries including retail, hospitality,
healthcare, transportation and logistics and ticketing.
Weighing less than 10 ounces and equipped with a full 3.5-inch display, the XM70 fits in the palm
of the hand and can survive all-day use in challenging environments. The XM70 can withstand 4
foot/1.2 meter drops to concrete on all sides across a wide temperature range and is sealed
against rain and dirt to IP54 standards. Choice of 2400mAh or 4000mAh Li-ion battery ensures
uninterrupted operation throughout the workday.
Feature Summary
Small, light and truly pocketable – under 10 ounces
Same hardware runs Android and Microsoft Windows Embedded Handheld 6.5
Brilliant 3.5-inch color display optimized for both indoor and outdoor use
High-performance 1D and 2D barcode scanning
Multiple 4’/1.2m drops to concrete across operating temperature range
Sealed to IP54 standards against dust and water
1GB/4GB of built-in memory with expansion capability
User-accessible microSD card slot
Summit IEEE 802.11a/b/g/n Wi-Fi
Bluetooth 4.0 connectivity
Numeric or PDA keypad
Full system of accessories
1-2
Janam Technologies LLC
Hardware overview
Front view numeric keypad
Power on/off
Indicator
LED
LCD
Scan
trigger
Shift
Alpha/numeric shift
Function
Backspace
Space
Programmable
Enter
Home
Navigation
Right
trigger
Connector
Left
Programmable
Power on/off
Indicator
LED
LCD
Scan
trigger
Navigation
Enter
Home
Brightness/contrast
Right
trigger
Connector
Left
trigger
Front view PDA keypad
Function
Function
trigger
XM70 User Manual
XM70 User Manual
1-3
Janam Technologies LLC
Top view
Bottom view
Power on/off
Barcode scan
Syncing/charging
window
connector
XM70 User Manual
2-1
Janam Technologies LLC
Getting Started
Unpacking your Janam XM70
Make sure you have the following
Janam XM70 handheld computer
Janam authorized battery
Handstrap and two screws to attach strap to device
Charging accessory (ordered/packaged separately) with one of the following kits:
o
Single-slot cradle kit
o
Four-slog cradle kit
o
USB cable with AC adapter
o
Serial cable with AC adapter
Attaching the Handstrap
To attach the handstrap:
1. Align the two holes in the metal handstrap anchor at the two handstrap screw ports.
2. For each side, place one of the screws provided into a lined up screw hole/screw port
and turn clockwise. Secure both sides before fully tightening down the screws.
3. Separate velcro to extend the handstrap and feed loose end through the handstrap
bar. Fasten velcro together to close the strap. Fit strap and secure device to user’s
hand by adjusting velcro as needed.
2
Charging the XM70
The main battery fully charges in approximately 3 hours. The Charge LED will illuminate
RED while charging and GREEN when fully charged.
Fully charged the standard battery provides approximately 4800 item scans (wireless item
lookup against data base) over approximately 4 hours. The 2X battery provides
approximately 9600 scans over 8 hours.
Resetting the XM70
Soft reset:
A soft or alternate reset is similar to restarting a desktop computer and is one of the first
steps in troubleshooting a device. In most cases, a soft reset won't affect data on the
device.
To perform a soft reset:
1. Press and hold the “Power” button until the display turns OFF.
2. When the XM70 is powered off, press and release the power button.
XM70 User Manual
2-2
Janam Technologies LLC
Factory Data Reset:
A Factory Data Reset returns the XM70 to factory settings, removing ALL applications and
data stored on the device. Folders and files on a microSD card will remain intact. Be sure
that all data is backed up before performing a Factory Data Reset.
To perform a Factory Data Reset:
Go to “Settings,” “Backup and reset” then tap “Factory Data Reset.”
Using the PDA Style Keypad
2-3
Janam Technologies LLC
External microSD Card
To access the microSD card:
1. Launch [SD File Manager].
2. Tap [mnt].
3. Select [extsd/] (no card will also see this folder but nothing inside.)
4. Content should show if the microSD card is available.
XM70 User Manual
*extsd/ = (microSD)
*sdcard/ = Device Memory
*Files will be saved under “sdcard/download” when using the browser to download files.
Taking Screenshots
To take screenshots of your device press the F4 and power button until you hear the camera
shutter sound. The screens can be extracted by navigating using SD File Manager app.
Touch “sdcard/,” “Pictures/” and “Screenshots/.”
XM70 User Manual
3-1
Janam Technologies LLC
Settings
Sound
Touch “Settings,” “Sound” Touch “Volumes” Customize your sound
preferences
3
Display
Brightness
Default Full Brightness
Loading...