James Products Ultra 8020 User Manual

14/11/091-V2

Professional Ultrasonic Cleaner

User Manual

Features

Tank size Tank capacity: 2000ml; Size: 18.3 x 15.3 x 7.7 cm / 7.2” x 6.0” x 3.0”.

Longest item that can ﬁt inside the tank is 20.4 cm / 8.0”

Industrial grade ultrasonic transducer

Ceramic heater 60°C temperature limited

Cooling fan

a long time

Detachable power cord Independent power switch and detachable power cord

Moisture-proofed PCB with Capable for dierent working environments with better industrial IC anti-interference performance

To protect and keep every part in good condition after working

Ø38 industrial transducer (60W), giving 160W cleaning power

SPECIFICATION

Description Digital Ultrasonic Cleaner

Model ULTRA 8020

Tank Capacity 2000 ml Max. 1700 ml Min. 550 ml

Power Supply 160 W (AC 220~240V 50Hz)

Digital Timer Settings 1 to 30 minute full range timer

Ultrasonic Frequency 35,000 Hz

Tank Material Stainless Steel SUS304

Net Weight 2.2 kg

Unit Size (L W H) 265 x 230 x 180 mm

Mains Fuse 3A (Only use a 3A ASTA approved to BS1362 fuse)

TABLE OF CONTENTS

Safety Precautions --------------------------------------------------------------------------------------- 2, 3

What cannot be cleaned ---------------------------------------------------------------------------------- 3

Applications --------------------------------------------------------------------------------------------- 4, 5

Sample Applications --------------------------------------------------------------------------------------- 6

Features and Accessories -------------------------------------------------------------------------------- 7

Control Panel Operation ---------------------------------------------------------------------------------- 8

Common Cleaning Methods -------------------------------------------------------------------------- 9, 10

Tips for Better Results -------------------------------------------------------------------------------------- 11

Operating Guidelines ------------------------------------------------------------------------------------- 12

Care and Maintenance ----------------------------------------------------------------------------------- 13

INTRODUCTION

Use tap water. Special solutions are not necessary in most cases.

Principles of ultrasonic cleaning:

Millions of tiny air bubbles are generated within liquid by high frequency vibration. The air bubbles burst when in contact with object and dislodge the debris to achieve the cleaning eect.

• Using tap water is sucient. Puriﬁed water or distilled water has the same cleaning eect as regular tap water for ultrasonic cleaning.

• When cleaning silver or copper items where oxidation has darkened the items, special solutions such as SeaClean2, needs to be added to the water to remove the oxidation.

Read the Manual First

The Ultra range of ultrasonic cleaners are very easy to use, although to get the best from your new purchase, we recommend you read this User Guide before getting down to any serious cleaning. It also contains important safety information as well as practical hints.

UNPACKING

Remove your Ultra 8020 cleaner from its packaging and ensure that along with this User Guide you have the correct mains plug ﬁtted for your supply and you have the speciﬁed accessories.

Retain the packing carton for storage of your unit, and also in the unlikely event that the unit needs to be returned for service or repair.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have supervision or have been given instruction concerning use of the appliance by a person responsible for their safety.

Unplug this product before ﬁlling with water. Fill with water only, unless otherwise speciﬁed by manufacturer to use a special cleaner. Do not overﬁll.

SAFETY PRECAUTIONS

Keep it away from children!

This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are aged 8 years and above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.

• Please store the ultrasonic cleaner where it is inaccessible by children.

• Danger to children! Danger for death through suocation! Keep packaging material away from children.

• This appliance should not be used by children. Keep the appliance and its cord out of reach of children.

To prevent life-threatening electrical shock, please observe the following:

Danger of electrical shock! Do not use while bathing. Never immerse the device or the power cord

in water or other liquid.

• Danger of electrical shock! Never touch the power plug with wet hands, especially when inserting or removing the plug.

• Danger of electrical shock! If the unit has fallen into water during operation, do not touch the unit. Remove the power plug from the socket ﬁrst.

• Danger of electrical shock! Do not spray water or liquid over the device.

• Never operate the device unattended.

• Follow the manual to operate the device.

• Do not use components unapproved by the manufacturer.

• When removing the power cord from the socket, grab the power plug not the cord.

• To protect the power cord from damage, do not cause it to get caught by things such as cupboard door or

a chair leg; do not drag across a hot surface.

• If there is damage to the power plug, cord, housing, or other parts of the device, do not use the device.

• Do not disassemble the device, except by professionals.

• If the unit is damaged, non-operational or has fallen into water, take it to a qualiﬁed service provider.

• Remove the power plug from the socket:

-if malfunction occurs

-before cleaning the device

-if the device is not going to be used for prolonged period

-after each use (recommended)

• The installation of an earth leakage circuit breaker with a rated tripping current of no more than 30 mA provides further protection against an electrical shock. The installation should only be carried out by a trained electrician.

To prevent ﬁre hazards, please observe the following:

• Never block the vents on the device. Keep the vents free from lint, hair and other materials.

• Do not place the device on a soft surface, such as a bed or a couch, where the vents could be blocked.

• Observe the other warnings in the previous section.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly

qualiﬁed person in order to avoid a hazard.

SAFETY PRECAUTIONS

Other observations:

• Do not operate the product without ﬁlling the tank with water. Running dry will damage the unit.

• Do not plug in the power cord before adding water to the tank. To avoid overspill, do not ﬁll the tank above

the ‘Max’ line.

• Do not use solution containing abrasive substances or strong corrosive chemical solution not recommended by the manufacturer or the supplier.

• Place the device on a dry and ﬂat surface for operation.

• When the device is subjected to severe electromagnetic interference, it may malfunction, stop operating or

lose control functions. If this happens, unplug the power cord then re-insert it to restart the device.

IMPORTANT SAFETY INSTRUCTIONS

When using electric appliances, basic precautions should always be followed, including the following :

• Read all the instructions before using the appliance.

• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

• Only use attachments recommended or sold by the manufacturer.

• Do not use outdoors.

• To disconnect, turn all controls to the o (O) position, then remove plug from outlet. Do not unplug by pulling

on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and before servicing or cleaning.

• To reduce the risk of electrical shock, do not put the appliance in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.

• All servicing of this product, including transducer replacement, is to be conducted by qualiﬁed service personnel.

• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.

• Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.

Items Not Suitable for Ultrasonic Cleaning

Soft Jewellery:

Pearls, emerald, ivory, coral, agate, sea turtle shells, etc

Welded, Plated and Glued Items:

Welded or plated metal items, glued items

Watches:

Except diver’s watches with depth rating over 50 m (150 ft)

Others:

Wood; coated glass, ceramic, camera ﬁlters with pre-existing cracks.

These items are not hard, so scratches may occur during cleaning.

Ultrasonic cleaning may enlarge the gaps inside the welded joints, plated coating or glued items and may cause separation.

Because the strong penetration capability of the ultrasonic waves, water may get into the watches if they are not truly waterproof.

Ultrasonic cleaning may enlarge the cracks pre-existed in the coating on the glasses, ceramic, and glass. If the items have no pre-existing cracks, then it is okay.

+ 11 hidden pages