James products SONIC 3D, SONIC 3MX, SONIC 4D, SONIC 6D, SONIC 4.5MX User Manual
...
SONIC RANGE
USER GUIDE
INTRODUCTION 3
UNPACKING & IMPORTANT 3
SAFETY INSTRUCTIONS 3-4
SUGGESTED APPLICATIONS 5
SONIC - D SERIES 6
OPERATION INSTRUCTIONS 7-8
SONIC - MX SERIES 9
OPERATION INSTRUCTIONS 10-11
DIFFERENT CLEANING METHODS 12
1
2
3
INTRODUCTION
Ultrasonic cleaners function by producing sound waves that are transmitted into the tank and
cleaning solution. These waves create millions of microscopic bubbles, which collapse or ‘implode’,
releasing large amounts of energy, which scrub the surface clean. This process is called ‘Cavitation’.
These tiny bubbles create incredible cleaning results not only to the surface, but by penetrating
the ner detail and recesses in small and hard to get areas to restore them to their former glory.
UNPACKING AND IMPORTANT
Remove cleaner from its packaging and ensure it is correct for your local voltage supply. Never
operate without, or remove the safety ground (earth) from the A.C. power cord / mains lead.
SAFETY INSTRUCTIONS
KEEP AWAY FROM CHILDREN
This unit is not intended for use by individuals including children with restricted physical, sensory
or mental capacities or those with a lack of experience and / or knowledge, including children,
unless they are supervised by an individual who is responsible for their safety or have received
training in operating the unit.
Please store the ultrasonic cleaner where it is not reachable by children.
Danger to children!
Danger of death through suocation! Keep packaging material away from children.
TO PREVENT LIFE-THREATENING ELECTRICAL SHOCK, OBSERVE THE
FOLLOWING
Danger of electrical shock! Do not use while bathing. Never immerse the unit or the power cord in
water or any other liquid. Never touch the power plug with wet hands, especially when inserting or
removing the plug. If the unit has fallen into water during operation, do not touch the unit. Remove
the power plug from the socket rst.
• Never operate the unit unattended.
• Follow the manual to operate the unit.
• Do not use components unapproved by the manufacturer.
• When removing the power cord from the socket, grab the power plug not the cord.
• Do not position power cord anywhere near a trip hazard.
• If there is damage to the plug, cord, housing or other parts of the unit, do not use.
• Do not open the unit as this will void your warranty.
• Remove power plug from the socket: If malfunction occurs; Before cleaning the unit;
• If the unit is not going to be used for prolonged use and aer each use.
Loading...