Page 1
CADY@JAMESINDUSTRY.COM
US: (+1)973-960-1877
LED GROW LIGHT-AYZ SERIES
Contact: Cady Liu
Mobile: (973)960-1877
Email: Cady@jamesindustry.com
This series grow light emits all the wavelengths of light which can be fully
absorbed by the plants to create photosynthesis and promote healthy growth
budding and flowering. This series have 1 head to 16 heads COB light, it will
give you more options when your plants need different strength of
illumination.
FEATURES
•
Most efficient for photosynthesis NEW FuII spectrum
•
Building to Harvest: Beneficial for seeding to fruiting stage
•
Unique cool system: Less heat, More growth
•
New lens gives more PAR value and deeper penetration Long life
span: The average life span is about 50,000 hours
•
Top quality fans, noise free
•
Energy Saving, environmental friendly
Page 1 of 5
Page 2
CADY@JAMESINDUSTRY.COM
US: (+1)973-960-1877
LED GROW LIGHT-AYZ SERIES
Contact: Cady Liu
Mobile: (973)960-1877
Email: Cady@jamesindustry.com
Page 2 of 5
PRODUCT SPECIFICATION
Product
GL-A50W AYZ
GL-B100W AYZ
GL-C200W AYZ
GL-D300W AYZ
GL-E450W AYZ
GL-F800W AYZ
Dimension
6.5” x 13.6”x 2.5”
13.6” x 13.6”x 2.5”
13.6” x 13.6”x 2.5”
26.5” x 13.6”x 2.5”
26.5”x 26.5” x 2.5”
31.2”x 31.2” x 2.5”
Actual Wattage
50W
100W
200w
300W
450W
800W
Weight
5.6lbs
7.5lbs
13.2lbs
16.8lbs
18.4lbs
21.2lbs
LED Quantity
2pcs x 108w COB LED
3pcs x 108w COB LED
4pcs x 108w COB LED
6pcs x 108w COB
LED
9pcs x 108w COB LED
12pcs x 108w COB LED
Luminous Flux
1860LM
3650LM
7280LM
10080LM
13650LM
17250LM
Frequency
50-60Hz
50-60Hz
50-60Hz
50-60Hz
50-60Hz
50-60Hz
Wavelength range
370nm-850nm
370nm-850nm
370nm-850nm
370nm-850nm
370nm-850nm
370nm-850nm
Input Voltage
100-240V AC Power
Input
100-240V AC Power
Input
100-240V AC Power
Input
100-240V AC Power
Input
100-240V AC Power
Input
100-240V AC Power Input
Ratio
Full spectrum
Full spectrum
Full spectrum
Full spectrum
Full spectrum
Full spectrum
Par value / 200nm
1829.2 umol
1829.2 umol
1829.2 umol
1829.2 umol
1829.2 umol
1829.2 umol
Lifetime
50,000 hrs
50,000 hrs
50,000 hrs
50,000 hrs
50,000 hrs
50,000 hrs
R/T
-20°C~ +40°C
-20°C~ +40°C
-20°C~ +40°C
-20°C~ +40°C
-20°C~ +40°C
-20°C~ +40°C
200w actual usage proven 9 spectrum power blend flowering mix
Full spectrum: UV380 IPC, IR730 IPCS, 6500K 2PCS, 440NM 4PCS,
460NM 6PCS, 580NM IPCS, 610 NM IPC, 630NM 4PCS, 660NM 10PCS
660nm 10pcs UV380 1pc
630nm 4pcs 730nm 1pc
610nm 1pc 6500k 2pcs
440nm 4pcs 580nm 1pc
460nm 6pcs
All color spectrums shown as above.
Page 3
CADY@JAMESINDUSTRY.COM
US: (+1)973-960-1877
LED GROW LIGHT-AYZ SERIES
Contact: Cady Liu
Mobile: (973)960-1877
Email: Cady@jamesindustry.com
Page 3 of 5
INSTALLATION INSTRUCTIONS
Setting up your fixture:
1.
It’s is very simple to install, no tool needed. Hook up the clips with the hangers on four corners of fixture.
2.
Plug in the power cord to back of the fixture and ground cord. If multiple fixtures work at the same time, please consider the power consumption.
3.
The fixtures should be ready to work by switching the green button.
4.
The fixture should be hanged above plant at proper distance. The higher you hang the broader coverage area but weaker the intensity. In the adjustment
period, which is very first 3-7 days, distance between plants and fixture should be 48 inches. After that 40-36 inches are recommended. No matter what we
suggest keeping minimum distance at 36 inches.
Page 4
CADY@JAMESINDUSTRY.COM
US: (+1)973-960-1877
Contact: Cady Liu
Mobile: (973)960-1877
Email: Cady@jamesindustry.com
Page 4 of 5
LED GROW LIGHT-AYZ SERIES
LED GROW LIGHT-AYZ SERIES
FAQ
Q: What is the ideal distance between the light and my plants?
A: We suggest the ideal distance is 48-36”. Some high lights use strains, so it can be little closer to plants, but
We recommend that no closer than 36”.
Q: does the light compatible with 240 voltages?
A: Yes, our light is compatible from 100v to 240v.
Q: Can I move my plants from HPS or fluorescents light straight to LED?
A: Yes, you can. However, since LED has different type of light to HPS and fluorescents. In the beginning
your plants may undergo a discoloration on upper leaves of your plants. This can be minimized by hanging
the fixture above 48” high from the plants. It also takes 3-7 days for plants to acclimate under new light.
If any discoloration still happens when you move the fixture closer to your plants, please move back up 6”
Q: Should I wear a pair of protective glasses in indoor gardening room that full of light?
A: Yes, these lights are just like sunlight, might cause harm to your eyes. We suggest wearing a pair of color
correction glasses.
Q: I find some of my leaves on the top curling and bleaching? What’s going on?
A: It’s because your plants haven’t completely acclimated the amount of lights. Try move the fixtures back up
6”, and everything will be fine.
Q: Is it true that when using LED light, the room temperature should increase?
A: Yes, as LED light emit less heat than HPS and Fluorescent light. It will slow down the transpiration and
Metabolic process in the leaf. Increase room temperature to 82-85 Fº making a perfect environment for
plants.
Page 5
CADY@JAMESINDUSTRY.COM
US: (+1)973-960-1877
Contact: Cady Liu
Mobile: (973)960-1877
Email: Cady@jamesindustry.com
Page 5 of 5
LED GROW LIGHT-AYZ SERIES
LED GROW LIGHT-AYZ SERIES
Q: Does Co2 still allow working with LED fixtures in indoor grow room?
A: Of course, it does. In fact, 82°F-85°F are the best temperature for plant to absorb Co2.
Q: Why does my light footprint looks so small?
A: Footprint area is determined by the height between fixtures and plant. if you follow our recommended height,
Your footprint coverage area should be fine. Our recommended height is for average light use plant, if you
Are growing high light use plant, the effective footprint will be smaller.
Q: What’s the ideal distance between my fixture and my plants?
A: In the first 3-7 days, we suggest you set at 48” high. After that bring it down 6” at a time until you reach 36”.
If you find curling, bleaching etc. on your leaves, please move back up 6”. That will be the ideal spot
For your plant’s life cycle.
Loading...