JALA ASIA JALATPAD Users manual

User Manual of Jala TPad

Thank you for purchasing MID products. This user manual introduces every function of the
MID briefly, which let you have an easy control in it and enjoy its value fully. Please read
this manual carefully before use. The version number of this manual is Ver1.0.

Announcements

1．Please noted that the new battery is only able to achieve the best performance after two

or three charge and discharge cycles completely.

2. For the first three times charge battery, please make sure the charging time should be
8-10 hours at least. After it, the battery can be full charged about 4 hours. These make
lithium battery achieved its best performance in the future.

3. To prevent data loss, it is recommended that users should be back up important data,
especially before the firmware upgrade. We are not be responsible for any losses
caused by data loss.

4. This machine is a high-precision electronic product, please do not disassemble by

yourself.

5. Please avoid any strong beat or collide the player.

6. Avoid using the player in the following environments: high temperature, low temperature,
humid, dusty, powerful magnetic field and long-term exposure under sunlight.

7. It’s allow to wipe the device's casing gently by wet cloth drying, and any other chemical
solution cleaning is strictly prohibited.

8. The device can not be suffered any drip and splash, and it should not be placed near

something like cups filled liquid.

9. To avoid hearing damage, please choose the appropriate volume while listening.

10. Do not alter any part of the device.

11. Please only use the batteries, chargers and accessories manufacturers allowed. It will

be violate the warranty regulations or may be dangerous if you use any other ones

12. Please follow the relevant local environmental regulations to dispose the discarded

device and accessories.

13. If there is any questions during using, please contact the local dealer or our company's

customer service center directly.

14. All specifications or others are subject to change without notice.

FCC RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types
Tablet PC (FCC ID: 2AFYR-JALATPAD) has also been tested against this SAR limit. The
highest reported SAR values for wireless router(hotspot), and simultaneous transmission
conditions are 1.397W/kg, and 1.516W/kg respectively. This device was tested for typical
body-worn operations with the back of the handset kept 0mm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that maintain a 0mm
separation distance between the user's body and the back of the handset. The use of belt
clips, holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

Manual Catalogue:

一、Product specifications
二、Appearance and Key Description
三、Operation keys introduction
四、Getting Started

（一）Open the player
（二）Transfer data
（三）The use of functions

1. WIFI

2. 4G(Support 3G)

3. Bluetooth

4. Play Music

5. Play video

6. Picture browsing

7. Photograph

8. Recording

9. G-SENSOR

10. Download and Use Application

（四）Charging Step

1. harge the unit via MIC-USB adapter.
（五）Abnormal restart

五、Frequently Asked Questions

一、Product specifications

● Model: ENTEL eT6

● FLASH Capacity: 16GB

● DDR Capacity: 2G and 1G compatible

● USB port: micro 5PIN USB

● Display: 9.7inch (type); 2048*1536 (Display pixels)

● Battery: Rechargeable polymer lithium ion battery 8 500mAh

● Size: 240mm (L) * 169.5mm (W) * 8.1mm (H)

二、Appearance and Key Description:

三、Operation keys introduction:

1. Reset button: Press the power button to force shutdown 10s

2. Power: Long press to open the device, short press to wake up the device while standby,

long press to off the device.

3. Volume + / - : Short press to adjust the volume.

四、Getting Started

（一）Boot device

According to "Power" button in the Appearance and Keys description, long press it to
turn on the device.

（二）Transfer data

Connect the device with computer PC through the USB cable in package, a PC with a
computer connection (to open USB data connection), the need to transfer music / video
/ file copy in the computer's hard drive, switch to the MID disk paste can achieve data
transfer.

（三）The use of functions:

1. WIFI

Turn on the WIFI in "Settings" menu, click search, select the available network and
connect it via enter the correct password.

2. 4G

Insert the 4G (WCDMA) or GSM card in device, enter the “Setting”, turn on the mobile
network (which default turn on) and wait for the 4G network connect. You can use the
mobile Internet once the signal icon appears on the upper right corner.