IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B
FCC limits.
SEIZURE WARNING: A small percentage of individuals may experience
epileptic seizures when exposed to certain light patterns or flashing lights.
Exposure to certain patterns or backgrounds on a television screen or while
playing video games, including games played on the TV Games unit, may induce
an epileptic seizure in these individuals. Certain conditions may induce previously
undetected epileptic seizure or symptoms in these individuals or in persons who
have no history of prior seizures or epilepsy. If you or anyone in your family has an
epileptic condition, consult your physician prior to playing. If you or anyone in
your family experience any of the following symptoms while playing a video game
— dizziness, altered vision, eye or muscle twitches, loss of awareness,
disorientation, any involuntary movement or convulsions — IMMEDIATELY
discontinue use and consult your physician before resuming play.
-To reduce the likelihood of a seizure while playing video games:
1. Sit or stand as far from the screen as possible.
2. Play video games in a well-lit room and on the smallest available screen.
3. Do not play if you are tired.
4. Take a 10 to 15 minute break every hour.
REPETITIVE STRAIN WARNING: Playing video games continuously can make
your muscles, joints or skin hurt after a few hours. To avoid problems such as
Tendonitis, Carpel Tunnel Syndrome or skin irritation:
1. Take a 10 to 15 minute break every hour, even if you don’t think you need it.
2. If your hands, wrists or arms become tired or sore while playing, stop and rest
them for several hours before playing again.
3. If you continue to have sore hands, wrists or arms during or after play, stop
playing and see a doctor.
BATTERY SAFETY INFORMATION:
WARNING: Battery acid leakage can cause personal injury and cause
damage to the product and surrounding property. If battery leakage occurs,
thoroughly wash any affected skin, making sure to keep battery acid away from
eyes, ears, nose and mouth. Immediately wash any clothing or other surface that
comes in contact with leaked battery acid. Leaking batteries may make "popping"
sounds. Dispose according to Local, State or Federal Battery Laws.
NEVER mix old and new batteries or different brands of batteries.
NEVER mix alkaline, standard (carbon-zinc), rechargeable (nickel-cadmium)
batteries with this product.
NEVER dispose of batteries in fire, as they may leak and explode.
NEVER use rechargeable batteries.
NEVER attempt to charge non-rechargeable batteries.
ALWAYS remove exhausted batteries from toy.
ALWAYS have an adult install batteries consistent with installation instructions.
ONLY use batteries specified by manufacturer.
Batteries are to be inserted with the correct Polarity.
The supply terminals are not to be short-circuited.
WARRANTY > For warranty information, visit www.jakks.com/warranty
TROUBLESHOOTING > If you cannot get the product to work with your
audio/video devices, please contact the device manufacturer.
This device complies with Industry Canada Licence-exempt RSS-210. Operation is
subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Requires 4 “AA”
alkaline batteries
(not included)
CONTROLLER
VIDEO GAME
FOR SET-UP:
(ADULT INSTALLATION REQUIRED)
1. Battery installation: Locate the battery compartment on the bottom
side of the portal. Using a Phillips Head screwdriver, remove the screw
and the battery door. Install fresh batteries, matching polarity icons with
those on the unit. Replace the battery compartment and the screw.
2. Unit Connection: Connect unit to TV, VCR or DVD player and select
the appropriate “line in” source. Consult the audio/video device's
manual for details.
PORTAL
FIGURE 2
Before replacing
batteries, turn power off
and disconnect the AV
cable from the TV.
A/ V CABLE
DreamWorks Dragons © 2014 DreamWorks Animation L.L.C.
TM & © 2014 MANUFACTURED BY JAKKS PACIFIC, INC., 22619 PCH, MALIBU, CA, 90265 U.S.A.
All other symbols, marks, logos, and designs (collectively “Trademarks”) are Trademarks of and proprietary to their respective owners and used under license.
MADE IN CHINA.
Contents may vary in style, color, shape and decoration from images shown on package or in advertising.
Questions or comments? www.jakks.com, consumers@jakks.com, or 1-877-875-2557 in North America.
Developed by HotGen Ltd London.
The ratings icon is a trademark of the Entertainment Software Association.
ATTENTION! Remove and discard packaging ties and fasteners before giving toy to child.
Mild
Fantasy Violence
FIGURE 1
If you experience screen
problems such as horizontal
lines, distorted graphics,
ghosting or fading, batteries
may need to be changed.
If you experience further
difficulties, reset the PORTAL
by turning it OFF and ON again
or consult the audio/video
device’s manual to
troubleshoot.
GAME PLAY: 6 STAGES, 18 MISSIONS
Flap, glide and blast! Find the Hero gates and unlock
sub-levels for 6 different types of play. Battle through
waves of enemy dragons, collect dragon eggs and
challenge yourself to reach 100% completion.
Hero Portal™ DreamWorks Dragons Figures only work with
the Hero Portal™ DreamWorks Dragons Game System.
SET UP
1
Plug the A/ V CONNECTORS into a
TV, VCR or DVD player and select
the appropriate “line in” source.
Consult the audio/video device's
manual for details.
2
Move the POWER SWITCH, located on the
bottom of the PORTAL, to the ON position.
PORTAL
POWER SWITCH
3
Select a FIGURE and place it on the PORTAL. This will be
the character that you will control in the game.
FIGURE 1
PORTAL
A / V CONNECTORS
TIP
Some newer model TV’s
may not include RCA A/V
inputs. If your TV does not
include the appropriate A/V
inputs an adapter may be
requiered.
4
Place FIGURE 2 on the PORTAL to select support character.
Support characters can be summoned to perform special
attacks in the game!!
FIGURE 2
CONTROLS
START / PAUSE
Move your character UP, DOWN, LEFT or RIGHT.
MOVEMENT
ADVANCED CONTROLS
EVADE BACK
DASH FORWARD
EVADE UP
EVADE DOWN
FIRE
HEAVY SHOT
(HOLD)
ACTIVATE SHIELD
SPECIAL ATTACK
SUPPORT AT TACK
(HOLD)
GAME SCREEN
1
2
3
4
1 SCORE
2 PLAYER HERO
3 SHIELD METER
4 SPECIAL ATTACK METER
5 HEALTH METER
TIP: Achieve 100% to unlock Ultimate Hero Mode.
6 CO-OP HERO
7 CO-OP SPECIAL ATTACK METER
8 COLLECTIBLE / COLLECTED:
A) Dragon Coins; B) Dragon Eggs
C) Dragon Blade
SPECIAL
ATTACK
SHIELD
ATTACK /
FIRE
TROUBLESHOOTING
TIPS
1 NO PICTURE – TV/MONITOR Screen is black with no
picture:
•
Make sure batteries have been installed properly.
(ADULT INSTALLATION REQUIRED)
•
Make sure the Hero Portal™ power switch is in the ON
position.
•
Make sure the AV cables are properly connected to your
TV or Monitor.
•
Make sure the TV or Monitor input setting is correct.
2 FIGURE NOT RECOGNIZED – Error message appears,
“Incorrect figure on the Portal. Please remove it to
continue.”
•
ONLY Hero Portal™ DreamWorks Dragons figures
will work with the Hero Portal™ DreamWorks Dragons
Video game.
•
If you are using a non Hero Portal™ DreamWorks
Dragons figure it will not work with this product.
•
If you are using an Official Hero Portal™ DreamWorks
Dragons figure please make sure it is laying flat on the top
of the PORTAL surface.
•
Please remove all other figures from proximity of the
PORTAL and replace the figures you would like to use one at
a time.
•
Note only two figures may be placed on the PORTAL
surface at one time.
•
Restart the game by powering the Hero Portal™ OFF, wait
15 seconds, and power back ON.
•
Power the Hero Portal™ OFF, replace batteries, and power
back ON. (ADULT INSTALLATION REQUIRED)
3
GAME FREEZES – Game screen is stuck or screen has gone
black:
•
Power the Hero Portal™ OFF, wait 15 seconds, and power
back ON.
•
Replace batteries then turn the PORTAL unit ON and try
again. (ADULT INSTALLATION REQUIRED)
5
4
MISSION ACCESS – Hero cannot gain access to areas in
game:
6
•
Please check to see if you are currently using any one of
the required characters to access the mission
7
•
Replace current figure with any one of the characters
shown in the on-screen prompt.
8C
5 GAME AUTOMATICALLY RESETS –
8B
Game reloads unintentionally:
8A
•
Power the Hero Portal™ OFF, wait 15 seconds, and power
back ON.
•
Power the Hero Portal™ OFF, replace batteries, and power
back ON. (ADULT INSTALLATION REQUIRED)
6 GAME IS IN BLACK AND WHITE –
No color on your TV or Monitor:
•
Make sure you have connected the A/V CONNECTORS
properly and have selected the appropriate "input" setting.
(ADULT INSTALLATION REQUIRED)
•
Consult the Manufacturer’s manual for your TV/MONITOR
for additional information.
Loading...