Jaeger-leCoultre Reverso Lady Quartz, Reverso Lady jewellery Quartz, Reverso Lady Mechanical, Reverso Lady jewellery Mechanical, Joaillerie 101 User Manual

ReveRso Lady - ReveRso Lady jeweLLeRy

M

echanicaL ModeL

QuaRtz ModeL

1 Hour hand

2 Minute hand

3 Crown

Reverso Lady Reverso Lady jewellery

1

2

3

1

2

3

1 Hour hand

2 Minute hand

3 Crown

Reverso Lady Reverso Lady jewellery

1

2

3

1

2

3

Introduction

We congratulate you on the purchase of your Jaeger-LeCoultre watch and thank
you for your confidence.

This Art Deco icon with its pure geometric shapes remains as timeless yet
contemporary as ever. Now a legend in its own time, the Reverso Lady continues
to shine like a beacon in the watchmaking industry.

Precious and elegant, the Reverso Lady jeweller y watch is a fair ytale landscape
living in step with fine watchmaking technology. On the front, its dial is illuminated
by 28 diamonds. On the back, its second face is dedicated to a customized
engraving.

We invite you to consult the operating instructions and we wish you great
pleasure with your Jaeger-LeCoultre timepiece.

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 1/6

Accuracy

Mechanical models with manual or automatic
winding

The precision of the mechanical models is determined by the
balance. The latter performs 21,600 or 28,800 vibrations per
hour depending on the model (see technical characteristics).

Despite all the care that the Jaeger-LeCoultre master­watchmakers have lavished on making and assembling your
watch, its accuracy is subject to the influence of gravity, mag­netic fields, shocks, as well as ageing of the oils. This accuracy is
measured by its rate regularity in various positions.

The nature of your temperament and of your daily activi­ties may cause slight variations in timekeeping. If you were to
notice that your watch is running slow or fast, we advise you
to take it to an approved Jaeger-LeCoultre retailer, who will
make any necessary adjustments.

Quar tz models

The quar tz models are accurate to within 2 to 3 minutes
per year.

Jaeger-LeCoultre quartz watches contain a battery
and electronic components. When performing
maintenance, your official Jaeger-LeCoultre Service

Centre or your authorised Jaeger-LeCoultre retailer
will take charge of their recovery and disposal in accordance
with the standards in force.

Water resistance

Jaeger-LeCoultre Reverso watches are water-resistant to
3 bar/atm. This property is identifiable by the

symbol
engraved on the case-back. This means that you can use your
watch for short swims, and when diving from the poolside,
but not from a diving board. It must not be used either for
scuba diving or for spor ts where there are significant risks of
hard knocks, such as windsurfing and waterskiing. Please also
note that leather straps are not suitable for aquatic activities.

It is also essential to have the water resistance of your watch
regularly checked by an authorised Jaeger-LeCoultre retailer
at least once every 2 years, and definitely before any period
in which it will undergo prolonged and / or regular immersion.

The «1000 Hours Control» test
by Jaeger-LeCoultre

Jaeger-LeCoultre subjects each of its watches to the rigourous
«1000 Hours Control» test programme. Unique in its kind,
this test consists of 1000 hour s of comprehensive, stringent
checks.

The «1000 Hours Control» seal or mar king affixed or
engraved on the back of your watch certifies that it has
undergone this observation programme in our laboratories
and has passed all the tests, relating to rate regularity, tem­perature and atmospheric pressure, resistance to impacts
and magnetic fields, as well as water-resistance. Your watch
is therefore capable of withstanding the trials awaiting it in
everyday life when you wear it on your wrist.

The criteria of the «1000 Hours Control» programme go far
beyond the official timekeeping test standards, which concern
only par t of the movement. Jaeger-LeCoultre tests not only
the movement before casing it within the watch, but also the
watch as a whole.

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 2/6

Adjusting the bracelet

You can adjust your steel bracelet yourself. However, if you
have a gold model, we advise you to entrust it to the nearest
approved Jaeger-LeCoultre retailer, or to contact one of our
official Ser vice Centres listed at the end of the guarantee
booklet.

Adjusting the steel bracelet

Place the watch on your wrist. You can thus see how many
links need to be added or removed.

Remove your watch by simultaneously pressing the pushpieces
on either side of the clasp.

Hold the bracelet near the clasp. Using the adjustment tool,
press the end of the bar (fig. 1) and lift up the link (fig. 2).
Avoid the 2 links on either side of the clasp.

Proceed in the same way for the following link (fig. 3) if you
want to remove a single row of links (or the 2

nd

, 3rd, etc. if you

want to remove 2, 3... rows of links).

Take out the two bars (fig. 4).

Remove the row(s) of links (fig. 5).

Place the 2 ends of the bracelet back together and insert a
bar (fig. 6).

Tip over the link, press on the end of the bar pivot and push
your link down until it clicks (fig. 7).

Adjusting the clasp

The clasp of your watch is fitted with a length-change system
enabling you to lengthen or shorten your bracelet by 4 mm on
each side, for enhanced wearer comfort.

Using the fine adjustment system

Transition from the long position to the short position:

Remove your watch.

Hold your clasp open between the thumb and forefinger of
one hand, with the bracelet section in your other hand (fig. 1).

Fig. 7

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 5 Fig. 6

Fig. 1

Lift up the clasp cover so
as to release the tipover
part of the bracelet section
from its groove (fig. 2).

Fig. 2 Long position

Push the tip-over par t of
your bracelet section and
place it in its groove, facing
the opposite way to its
initial position (fig. 3).

Fig. 3 Shortened position

The transition from the
short to the long position
is done in the same
manner, but in the opposite
direction (fig. 4).

Fig. 4 Extended position

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 3/6

MechanicaL ModeL

Technical characteristics

- Manually-wound mechanical movement,
Calibre 846.

- 21,600 vibrations/hour.

- Power reserve : approximately 40 hours.

Movement

Use

Winding

Crown in position 1.

Winding is performed by turning the crown clockwise. The
watch is fully wound when the crown locks.

Do not attempt to wind a manually-wound watch beyond
the locking point.

To ensure good operating accuracy, it is advisable to wind
your watch regularly, at least once a day.

Setting the hour and minutes

Pull the crown out to position 2.

Move the hands clockwise until the desired time is displayed.

When the operation is completed, push the crown back to
position 1.

QuaRtz ModeL

Technical characteristics

- Quartz movement, Calibre 608.

- 32,768 HZ.

- The battery reference is 377.

Movement

Use

Setting the hour and minutes

Pull the crown out to position 2.

Move the hands clockwise until the desired time is displayed.

When the operation is completed, push the crown back to
position 1.

Jaeger-LeCoultre Calibre 846.

1 2

1 2

Jaeger-LeCoultre Calibre 608.

1 2

1 2

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 4/6

This International Guarantee applies to Jaeger-LeCoultre
products sold or presented for guarantee repairs in all
countries except the United States of America and Canada
(for those two countries, see the Limited Warranty).

The manufacturer’s International Guarantee applies only
to Jaeger-LeCoultre products purchased from authorised
Jaeger-LeCoultre retailers. In addition, all maintenance and
repair works must be carried out either by an authorised
Jaeger-LeCoultre retailer or by an official Jaeger-LeCoultre
Service Centre. If these conditions are not met, the
manufacturer’s guarantee does not apply. For a list of
authorised Jaeger-LeCoultre retailer s worldwide, please
contact Jaeger-LeCoultre or its Distributors.

Jaeger-LeCoultre watches

The terms and conditions of the Jaeger-LeCoultre

International Guarantee

The following terms and conditions of the Jaeger-LeCoultre
International Guarantee apply to watches sold or presented
for guarantee repairs in all countries except the United States
of America and Canada (for those two countries, see the
Limited Warranty).

Your Jaeger-LeCoultre watch is guaranteed against all
manufacturing defects for two years from the date of
purchase, subject to the following conditions.

Any part found by our technical services to be defective as a
result of a manufacturing defect will be, at the sole discretion
of Jaeger-LeCoultre, repaired or replaced free of charge.

The Jaeger-LeCoultre International Guarantee is valid only if
the guarantee certificate enclosed with this booklet has been
duly completed, dated, stamped and signed by the authorised
Jaeger-LeCoultre retailer who sold your watch.

This International Guarantee does not cover defects resulting
from accidents, mishandling or incorrect or abusive use (for
example, knocks, dents, crushing, excessive temperatures,
powerful magnetic fields), the use of or effect of using
batteries other than those designated by Jaeger-LeCoultre,
unauthorised alteration or repair or the consequences of
normal wear and ageing of the watch, the strap or the glass,
the loss of water resistance after two years after the date
of purchase if your watch is water-resistant, and any defect
resulting from the contact with water if your watch is not
water-resistant.

Jaeger-LeCoultre water-resistant watches may be identified
by the symbol

engraved on the back. Their water
resistance is guaranteed for two years from the date of
purchase, provided that the glass, the bezel, the back, the
middle part and the crown have not been damaged. It
is essential to have the water resistance checked by an
authorised Jaeger-LeCoultre retailer or an official Jaeger­LeCoultre Ser vice Centre at least once a year, and in any
event, prior to any period of intensive use. Please refer to the
operating instructions for fur ther details.

For quartz watches, this guarantee does not cover the battery
life.

As a consumer, you may have legal rights under applicable
national legislation governing the sale of consumer goods;
those rights are not affected by this guarantee.

Customer service at Jaeger-LeCoultre

The movement of a mechanical watch requires regular
maintenance (servicing, lubrication, etc.) to ensure a long
operating life. Should your watch need servicing or repairs, please
send it, together with its guarantee cer tificate, to the authorised
Jaeger-LeCoultre retailer who sold it to you.

Alternatively, you may send it to one of the official
Jaeger-LeCoultre Service Centres listed at the end of this booklet,
or to any authorised Jaeger-LeCoultre retailer of which a list is
available on the «www.jaeger-lecoultre.com» website.

Our official Ser vice Centres employ watchmakers trained at the
Jaeger-LeCoultre Manufacture and possess the tools and parts
necessary to repair and maintain all Jaeger-LeCoultre watches
and clocks. In certain cases, especially for operations requiring
special tools and parts, the Service Centres will send your watch
to the Jaeger-LeCoultre Manufacture in Switzerland to have the
necessary work carried out.

In any case, or if you live in a country which is not indicated in
our lists, please do not hesitate to contact directly Manufacture
Jaeger-LeCoultre in Switzerland, Rue de la Golisse 8, 1347 Le
Sentier, telephone [phone], fax [phone],
which will inform you of the procedure to follow. We also invite
you to visit our website «www.jaeger-lecoultre.com» for an
updated list of official Jaeger-LeCoultre Service Centres.

International Guarantee

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 5/6

The following Limited Warranty applies to Jaeger-LeCoultre
products sold or presented for warranty repairs in the
United States of America and Canada only.

The manufacturer’s Limited Warranty applies only to
Jaeger-LeCoultre products purchased from authorised
Jaeger-LeCoultre retailers. In addition, all maintenance and
repair works must be carried out either by an authorised
Jaeger-LeCoultre retailer or by an official Jaeger-LeCoultre
Service Centre. If these conditions are not met, the
manufacturer’s Limited Warranty does not apply. For a list
of authorised Jaeger-LeCoultre retailers worldwide, please
contact Jaeger-LeCoultre or its Distributors.

Jaeger-LeCoultre watches

The terms and conditions of the Jaeger-LeCoultre
Limited Warranty

The following terms and conditions of the Jaeger-LeCoultre
Limited Warranty apply only to watches sold or presented
for warranty repairs in the United States of America and
Canada.

Your Jaeger-LeCoultre watch is guaranteed against all
manufacturing defects for two years from the date of
purchase, subject to the following conditions.

Any part found by our technical ser vices to be defective as a
result of a manufacturing defect will be, at the sole discretion
of Jaeger-LeCoultre, repaired or replaced free of charge.

The Jaeger-LeCoultre Limited Warranty is valid only if the
warranty certificate enclosed with this booklet has been duly
completed, dated, stamped and signed by the authorised
Jaeger-LeCoultre retailer who sold your watch.

This Limited Warranty does not cover defects resulting
from accidents, mishandling or incorrect or abusive use (for
example, knocks, dents, crushing, excessive temperatures,
powerful magnetic fields), the use of or effect of using
batteries other than those designated by Jaeger-LeCoultre,
unauthorised alteration or repair or the consequences of
normal wear and ageing of the watch, the strap or the glass,
the loss of water resistance after two years after the date
of purchase if your watch is water-resistant, and any defect
resulting from the contact with water if your watch is not
water-resistant.

Jaeger-LeCoultre water-resistant watches may be identified by
the symbol

engraved on the back. Their resistance is
guaranteed for two years from the date of purchase, provided
that the glass, the bezel, the back, the middle par t and the
crown have not been damaged. It is essential to have the
water resistance checked by an authorised Jaeger-LeCoultre
retailer or an official Jaeger-LeCoultre Service Centre at least
once a year, and in any event, prior to any period of intensive
use. (Please refer to the operating instructions for fur ther
details).

For quartz watches, this warranty does not cover the battery
life.

Except insofar as prohibited by applicable law, this Limited
Warranty shall be the exclusive manufacturer’s warranty.

Neither this Limited Warranty nor any other warranties,
whether express or implied, including, but not limited to,
any implied warranty of merchantability or of fitness for any
particular purpose, shall extend beyond the period of two
years from the date of purchase.

The liability of Jaeger-LeCoultre is limited solely and
exclusively to repair or replacement under the terms and
conditions stated herein. Jaeger-LeCoultre shall not be
liable, by virtue of this Limited Warranty or otherwise, for
any loss or damage arising out of the use of or inability
to use this watch nor for any incidental or consequential
damages relating in any way to this watch. Some States,
Provinces and Territories do not allow limitations on how
long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.

This Limited Warranty grants you specific legal rights, in
addition to which you may have other legal rights which
vary from one Country, State, Province or Territory to
another.

Customer service at Jaeger-LeCoultre

The movement of a mechanical watch requires regular
maintenance (servicing, lubrication, etc.) to ensure a long
operating life. Should your watch need ser vicing or repairs,
please send it, together with its warranty cer tificate, to the
authorised Jaeger-LeCoultre retailer who sold it to you.

Alternatively, you may send it to one of the official Jaeger­LeCoultre Ser vice Centres listed at the end of this booklet,
or to any authorised Jaeger-LeCoultre retailer of which a list is
available on the «www.jaeger-lecoultre.com» website.

Our official Ser vice Centres employ watchmakers trained at
the Jaeger-LeCoultre Manufacture and possess the tools and
parts necessary to repair and maintain all Jaeger-LeCoultre
watches and clocks.

In certain cases, especially for operations requiring special
tools and par ts, the Service Centres will send your watch to
the Jaeger-LeCoultre Manufacture in Switzerland to have the
necessary work carried out.

In any case, or if you live in a country which is not indicated
in our lists, please do not hesitate to contact directly
Manufacture Jaeger-LeCoultre in Switzerland, Rue de la
Golisse 8, 1347 Le Sentier, telephone [phone],
fax [phone], which will inform you of the
procedure to follow. We also invite you to visit our website
«www.jaeger-lecoultre.com» for an updated list of official
Jaeger-LeCoultre Service Centres.

Limited Warranty

ReveRso Lady - Re veRso Lady jeweLLeRy -

English 6/6