Jade Range Co JTRH-18P User Manual
CABINET BASE PLANCHA TOP RANGE
TM
TITAN
™
®
JTRH-36P
CABINET BASE
PLANCHA TOP RANGE
MODEL NO. DESCRIPTION
jtrh-18p plancha, cabinet base, 18"
o
o
jtrh-24p plancha, cabinet base, 24"
o
jtrh-30p plancha, cabinet base, 30"
o
jtrh-36p plancha, cabinet base, 36"
Plancha Is a direct contact cooking surface that can also be used as a hot top or burner.
Focused center heat radiating outward allows for multiple heating and cooking areas
on a single surface.
STANDARD FEATURES
• Polished 5/8" thick steel plancha plate
• Variable size multi-point gas connection—see utility information for details
• 14 gauge stainless steel grease trough
• Stainless steel front, sides and stub back
• Stainless steel 6" plate shelf
• 3/4" gas regulator (shipped loose, must be installed for proper operation)
AVAILABLE OPTIONS
o Stainless steel high riser
o Stainless steel double high riser
o Stainless steel high shelf
o Stainless steel double high shelf
o Stainless steel tubular high shelf
o Stainless steel tubular double high shelf
o Common plate shelf with Item(s) Model(s)
o Cap and cover manifold. Left o Right o
o Floor length legs
ACCESSORIES
o 6" casters, front two locking (5" diameter wheel)
o 36" flex hose with quick disconnect (3/4" connection)
o 48" flex hose with quick disconnect (3/4" connection)
o 1" gas pressure regulator (specify gas type)
o 1-1/4" gas pressure regulator (specify gas type)
o Stainless steel doors
For cooking
WWW.JADERANGE.COM
JADE RANGE, LLC., A MIDDLEBY COMPANY • 2650 Orbiter Street • Brea, CA 92821 • PHONE: 800-884-5233 FAX: 714-961-2550
Note: In line with their policy to continually improve products, Jade reserves the right to change materials and specifications without notice. printed in usa
form #jto520 ©2008 jade range, llc
TM
TITAN
CABINET BASE DIMENSIONS
™
CABINET BASE PLANCHA TOP RANGE
®
CABINET BASE
PLANCHA TOP RANGE
model btus width depth height appx. shp. wt.
jtrh-18p 17,500 18" 38" 36-1/2" 250 lbs.
jtrh-24p 17,500 24" 38" 36-1/2" 300 lbs.
jtrh-30p 17,500 30" 38" 36-1/2" 450 lbs.
jtrh-36p 35,000 36" 38" 36-1/2" 530 lbs.
DESCRIPTION:
Cabinet base plancha top range. To be model #JTRH-_______
manufactured by Jade Range LLC. Furnished with
polished 5/8" thick steel plancha plate, variable size multipoint gas connection, 14 gauge stainless steel grease
trough, stainless steel cabinet interior and exterior,
stainless steel front, sides and stub back, stainless steel 6"
plate shelf, stainless steel adjustable 6" legs
SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 ft.
NOTE: The company reserves the right to make substitutions of
components without prior notice.
cabinet base
UTILITY INFORMATION - GAS:
• Ranges are supplied with 1-1/4" front manifold connection
and a 1" or 3/4" capped rear manifold connection. For rear
manifold connection, remove cap. Ranges are supplied with
3/4" gas pressure regulator. For 1-1/4" or 1" gas pressure
regulator, see accessories. (Specify required front manifold
cap and cover when ordering.)
• Required operating pressure:
Natural Gas 5" W.C. minimum
Propane Gas 10" W.C. minimum
14" W.C. maximum
Note: This unit must be connected with the gas appliance
regulator supplied.
WWW.JADERANGE.COM
JADE RANGE, LLC., A MIDDLEBY COMPANY • 2650 Orbiter Street • Brea, CA 92821 • PHONE: 800-884-5233 FAX: 714-961-2550
Note: In line with their policy to continually improve products, Jade reserves the right to change materials and specifications without notice. printed in usa
form #jto520 ©2008 jade range, llc
Loading...