JACUZZI Luxura 6030 User Manual

A

Technical Specications

Luxura® 6030 Skirted Bath Technical Specications

Letter Description Soaker Whirlpool

- Drain Location LH/RH Drain

- Pump/Blower Location LH/RH Pump

- Cutout Template N/A

- Drop-in Cutout Dimensions (L x W) N/A

- Total Weight 662 lbs (300 kg) 687 lbs (311 kg)

- Floor Loading 53lb/ft² (258 kg/m²) 55lb/ft² (268 kg/m²)

- Operating Gallons (Max) 47 gal (177 L)

- Product Weight - Empty 70 lbs (32 kg) 95 lbs (43 kg)

- Soaking Depth 16” (406 mm)

L Outer Length 60” (1524 mm)

W Outer Width 30” (762 mm)

H Overall Height 20.25” (514 mm)

A Overow Height 16.75” (424 mm)

B Long Edge to Drain Center 9.25” (235 mm)

C Short Edge to Drain Center 15” (381 mm)

D Drain Shoe Length 5.875” (149 mm)

E Tile Flange Height 1” (25 mm)

F Deck Width 3.6” (91 mm)

G Service Access Dimensions 12” x 18” (305 mm x 457 mm)

I Floor Cutout for Drain 12” x 6” (305 mm x 152 mm)

Interior Dimensions (JW x JL)

J

Bottom of Bath

Interior Dimensions (KW x KL)

K

Top of Bath

45” x 18.5” (305 mm x 457 mm)

53.5” x 21.5” (1359 mm x 546 mm)

L2 Interior Depth - Drain End (D) 19” (483 mm)

M Backrest Angle 26°

Each component requires
a seperate, dedicated GFCI
protected circuit

Model with
components

Soaker Only None

Soaker Model

Motor/Pump

Heater

Whirlpool Model

GFCI
Outlet
(60Hz)

120V/15A

120V/15A

Key Dimensions

B

F

C

J(L)

J(W)K(W)

K(L)

Top View

L W

Side View

Motor

M

I

D

L2

©2017 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/baths/

Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Product shows 6030 Luxura Skirted Bath Left-Hand Model.
*Measurements inside unit represent cutout in floor to allow for drain/overflow.

W

(G) Service Access

E

H

End View

NOTE

The overall dimensions are

nominal with a tolerance of +0 and

-.25" (6mm).

*Deck width reects only area

indicated on detail.

A

Drain/Overflow View

B

QA11000C www.jacuzzi.com Technical Specications