JACUZZI JS6422 Specifications

End ViewSide View

Drain/Overflow View

Technical Specications

Luxura® 6634 Bath Technical Specications

Letter Description Soaker Whirlpool

- Drain Location LH/RH Drain

- Pump Location LH/RH Pump

- Cutout Template N/A

- Drop-in Cutout Dimensions (L x W) 64” x 32” (1625 mm x 813 mm)

- Total Weight 798 lbs (362 kg) 823 lbs (373 kg)

- Floor Loading 51lb/ft2 (250 kg/m²) 53lb/ft2 (258 kg/m²)

- Operating Gallons (Max) 58 gal (189 L)

- Product Weight - Empty 65 lbs (32 kg) 90 lbs (41 kg)

- Soaking Depth 16” (406 mm)

L Outer Length 66” (1676 mm)

W Outer Width 34” (864 mm)

H Overall Height 20” (508 mm)

A Overow Height 15.25” (387 mm)

B Long Edge to Drain Center 8.25” (210 mm)

C Short Edge to Drain Center 16” (406 mm)

D Drain Shoe Length 5.25” (133 mm)

E Tile Flange Height 1” (25 mm)

F Deck Width 3.6” (91 mm)

G Service Access Dimensions 12” x 18” (305 mm x 457 mm)

I Floor Cutout for Drain 12” x 6” (305 mm x 152 mm)

Interior Dimensions (JW x JL)

J

Bottom of Bath
Interior Dimensions (KW x KL)

K

Top of Bath

50.25” x 20.5” (1283 mm x 521 mm)

57” x 25” (1448 mm x 635 mm)

L2 Interior Depth - Drain End (D) 17” (432 mm)

M Backrest Angle 23°

Each component requires
a seperate, dedicated GFCI
protected circuit

Model with
components

Soaker Only None

Soaker Model

Motor/Pump

Heater

Whirlpool Model

GFCI
Outlet
(60Hz)

120V/15A

120V/15A

Key Dimensions

B

C

I

D

L2

©2017 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/baths/
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.

A

J(L)

K(L)

Top View

L

F

Motor

J(W)K(W)

M

Product shows Luxura 6634 Bath Left-Hand Model.
*Measurements inside unit represent cutout in floor to allow for drain/overflow.

(G) Service Access

W

E

W

H

NOTE

The overall dimensions are
nominal with a tolerance of +0 and

-.25" (6mm).

*Deck width reects only area
indicated on detail.

A

B

QA14000C www.jacuzzi.com Technical Specications