Fuzion 7260 Salon Spa Combination
Product Codes beginning with: FUZ7260CCR
Also applies to products sold under part numbers: FM25, KN55, KN60, KN65, KN70, KN75, KN80, KN85
TECHNICAL SPECIFICATIONS
English Metric
Outer Dimensions 71 3/4” L x 59 3/4” W x 24” H 1822 mm L x 1518 mm W x 610 mm H
Interior Dimensions
(bottom of bath) L x W (Mid) x W (End) 49 1/2” L x 42” W x 42” W 1257 mm L x 1067 mm W x 1067 mm W
Drain/Equipment Confi guration Center drain/Right end pump & blower Center drain/Right end pump & blower
Bath Weight (empty) 242 lbs 109.8 kg
Total Weight/Floor Loading 1,825 lbs 61.3 lbs/ft
2
828 kg 299.2 kg/m
Operating Gallonage (min-max) 110 (min) 148 (max) U.S. Gals 417 (min) 560 (max) L
Electrical Specifi cations Each component requires a separate, dedicated GCFI protected circuit(s)
Motor/Pump & Heater 240V 20A 120HZ
Blower 120V 15A 60HZ
FEATURES, UPGRADES & ACCESSORIES
Material Type: High-Gloss Acrylic
Install Type: Drop-in with wood frame or Undermount
Available Colors: White (W), Almond (A), Oyster (Y), Black (B)
Cut-out: 70” x 58” or Undermount Template DD44000
Standard (Included) Features:
15 jets, In-line Heater, Chromatherapy lighting,
900w blower, bottom air channels, infi nity edge overfl ow, 2 neck
massaging waterfalls, 2 pillows, chrome twist and turn drain (for alternate
fi nishes, replace with standard parts, 1.5” drain elbow)
Available Control Systems:
J4 Luxury Control Panel (standard)
J5 Luxury LCD Control Panel
Available Upgrades:
Whisper Quiet Technology,
Illumatherapy Lighting
Available Accessories:
HB74 Optional wood frame (specify wood) 900: Unfi nished, 935: Wenge,
936: Teak
D095 TheraPro Jet Trim Kit (specify metal fi nish)
P556 AccuPro Jet Trim Kit (specify metal fi nish)
827: Chrome, 826: Brushed Nickel, 845: Oil Rubbed Bronze
*Note: D095 (Chrome) is standard on Illumatherapy jets.
GQ88 Light Chromatherapy Add-on Kit
DD50 Replacement Pillow (specify color) 959: White, 958: Almond,
969: Oyster
*Faucet installation note:
Selecting a faucet for rim mounting: The combined thickness at the rim
of the bathtub shell and optional wood deck is 2” (50 mm) nominal. The
length of the faucet tailpiece(s) must be long enough to extend past this
dimension and have ample clearance to assemble any hardware (i.e.
locknut, water supply fi ttings, etc.) necessary for installation. For under-
mount units, the combined thickness of the bathtub shell is 1/2” (12 mm)
nomial and the undermount deck should not exceed the length of the
faucet tailpiece(s), including any assembly hardware.
2
KEY DIMENSIONS
L
Blower
W
I
F
Overfl ow
*Deck width refl ects only area indicated on detail.
E
© 2010 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
Refer to installation instructions included with fi xture before beginning installation. Please confi rm product availability and specifi cations before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
NOTE: Graphics May Not be to Scale
Control
Panel
Side View
3”
W
(Heater)
Suction
Fitting
Heater
(Blower)
Motor
(G) Service
Access
C
(Motor)
Letter Description English Metric
L Outer Length 71 3/4” 1822 mm
W Outer Width 59 3/4” 1518 mm
H Overall Height** 24” 610 mm
A Overfl ow Height 16 3/4” 425 mm
B Long Edge to Drain Center 12 1/16” 306 mm
C Short Edge to Drain Center 36” 915 mm
D Drain Shoe Length 8 1/2” 216 mm
E Deck Height** 4” 102 mm
F Deck Width* 3 1/2” 89 mm
G Service Access Dimensions 12” H x 18” L 305 mm x 457 mm
I Floor Cut-out for Drain 18 1/2” x 4” 470 mm x 102 mm
L
H**
(Heater)
**Height of tub only, optional wood frame adds 1.25”
(Motor)
(Blower)
End View
A
Drain/Overfl ow
Note: Drain included.
Non-standard installation, refer to manual.
D
B
HD45000 REL 03/10
Loading...