Fuzion 6666 Salon Spa Combination
Product Codes beginning with: FUZ6666CCR
Also applies to products sold under part numbers: FG45, KR55, KR60, KR65, KR70, KR75, KR80, KR85
TECHNICAL SPECIFICATIONS
English Metric
Outer Dimensions 65 3/4” L x 65 3/4” W x 24” H 1670 mm L x 1670 mm W x 610 mm H
Interior Dimensions
(bottom of bath) L x W (Mid) 42” L x 42” W 1067 mm L x 1067 mm W x 1067 mm W
Drain/Equipment Confi guration Center drain/Right end pump & blower Center drain/Right end pump & blower
Bath Weight (empty) 225 lbs 102.1 kg
Total Weight/Floor Loading 1,808 lbs 60.2 lbs/ft
2
822 kg 293.8 kg/m
Operating Gallonage (min-max) 119 (min) 148 (max) U.S. Gals 451 (min) 560 (max) L
Electrical Specifi cations Each component requires a separate, dedicated GCFI protected circuit(s)
Motor/Pump & Heater 240V 20A 120HZ
Blower 120V 15A 60HZ
FEATURES, UPGRADES & ACCESSORIES
Material Type: High-Gloss Acrylic
Install Type: Drop-in with wood frame or Undermount
Available Colors: White (W), Almond (A), Oyster (Y), Black (B)
Undermount Cut-out Template: DD43000, See below drop-in diagram
Standard (Included) Features:
15 jets, In-line Heater, Chromatherapy lighting,
900w blower, bottom air channels, infi nity edge overfl ow, 2 neck
massaging waterfalls, 2 pillows, chrome twist and turn drain (for alternate
fi nishes, replace with standard parts, 1.5” drain elbow)
Available Control Systems:
J4 Luxury Control Panel (standard)
J5 Luxury LCD Control Panel
Available Upgrades:
Whisper Quiet Technology,
Illumatherapy Lighting
Available Accessories:
HB78 Optional wood frame (specify fi nish) 900: Unfi nished, 935: Wenge,
936: Teak
D095 TheraPro Jet Trim Kit (specify metal fi nish)
P556 AccuPro Jet Trim Kit (specify metal fi nish)
827: Chrome, 826: Brushed Nickel, 845: Oil Rubbed Bronze
*Note: D095 (Chrome) is standard on Illumatherapy jets.
GQ88 Light Chromatherapy Add-on Kit
DD50 Replacement Pillow (specify color) 959: White, 958: Almond,
969: Oyster
*Faucet installation note:
Selecting a faucet for rim mounting: The combined thickness at the rim
of the bathtub shell and optional wood deck is 2” (50 mm) nominal. The
length of the faucet tailpiece(s) must be long enough to extend past this
dimension and have ample clearance to assemble any hardware (i.e.
locknut, water supply fi ttings, etc.) necessary for installation. For under-
mount units, the combined thickness of the bathtub shell is 1/2” (12 mm)
nomial and the undermount deck should not exceed the length of the
faucet tailpiece(s), including any assembly hardware.
KEY DIMENSIONS
2
Letter Description English Metric
L Outer Length 65 3/4” 1670 mm
C
L
W
W Outer Width 65 3/4” 1670 mm
H Overall Height** 24” 610 mm
A Overfl ow Height 16 13/16” 427 mm
Blower
63 3/4"
11 1/2"
Motor
3”
I
E
Heater
(G) Service Access
Overfl ow
L
(Heater)
Side View
Suction
Fitting
F
Control Panel
*Deck width refl ects only area indicated on detail.
C
Drop-In Cutout
63 3/4"
31 9/16"
© 2010 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
Refer to installation instructions included with fi xture before beginning installation. Please confi rm product availability and specifi cations before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
NOTE: Graphics May Not be to Scale
L
45 1/2"
B Long Edge to Drain Center 12 1/8” 308 mm
C Short Edge to Drain Center 40 15/16” 1039 mm
D Drain Shoe Length 9 1/4” 234 mm
E Deck Height** 4” 102 mm
F Deck Width* 3 1/2” 89 mm
G Service Access Dimensions 12” H x 18” L 305 mm x 457 mm
I Floor Cut-out for Drain 20” x 4” 508 mm x 102 mm
W
(Motor)
**Height of tub only, optional wood frame adds 1.25”
(Heater)
End View
(Motor)
Note: Drain included.
Non-standard installation,
refer to manual.
H**
A
Drain/Overfl ow
HD34000 REL 03/10
D
B
Loading...