LENIRE™ LUXURY PILLOW
WITH Technogel
®
TURN OVER FOR INSTRUCTIONS
LENIRE™ Luxury Pillow with Technogel
INSTALLATION INSTRUCTIONS
• Remove the clear lm backing from the at side of the pillow
• Ensure that the intended bathtub surface is clean and dr y
• Press pillow against the bathtub surface. Do not try to place the
bath pillow on a wet surface.
• To remove the bath pillow, start by pulling up one of the top
corners of the pillow
• To store the pillow, simply re-apply the clear lm against the
adhesive surface and place back in the box
CARE AND CLEANING INSTRUCTIONS
• Dust and dir t can accumulate on the adhesive area on the back
of the pillow. To clean, simply rinse with water to remove any dirt
and dust and let the pillow air dry. The adhesive characteristic will
return when the pillow has dried.
• Do not use any detergents that contain alcohol on the pillow
surface to clean
• Do not clean the pillow with a brush or an abrasive cleaning tool
®
@Jacuzzibathus
www.jacuzziluxurybath.com
Loading...