Jacuzzi H546, H547, H548 User Manual
milano™ whirlpool bath and soaking bath
milan—or milano, as the Italians say—is the city at the center of attention. the pinnacle of Italian commerce and culture.
The Milano™ whirlpool bath is itself a
center–– of invigoration, rejuvenation.
features:
• 4 fully adjustable TheraPro™ jets
• 2 directionally adjustable AccuPro™ jets
• Sculpted armrest and backrest
• Integral Handrails
• Electronic on/off controls
• Drain included on whirlpool baths
milano™ whirlpool bath
model number: H547 (RH drain,
LH pump), H546 (LH drain, RH pump)
exterior dimensions:
72" long x 40" wide x 20¾" high
interior dimensions:
45" long x 26" wide x 18" wide
# of Jets/type of Jets:
4 TheraPro™ Jets
2 AccuPro™ Foot Jets
operating gallons:
60 gallons
milano™ soaking bath
model number: H548
exterior dimensions:
72" long x 40" wide x 20¾" high
interior dimensions:
45" long x 26" wide
Detail: The Milano™ whirlpool bath delivers both
safety and solace through integrated handrails,
sculpted armrests, and precise placement of patented
Jacuzzi® TheraPro™ and AccuPro™ jets.
Ordering Information
20"
2"
11"
71-1/2"
40"
12" x 4"*
5"
Motor
12" H x 18" L
Service Access
END VIEW
H
W
SIDE VIEW
L
2"
DRAIN/OVERFLOW
A
B
Milano™ Whirlpool Bath
Model: H546, H547
Milano™ Bath
Model: H548
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
Product Code:
H546 Milano™ Whirlpool Bath
Left Hand
H547 Milano™ Whirlpool Bath
Right Hand
H548 Milano™ Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
Trim Kit: 2 BMH Jet Rings #J869
Trim kit: 4 HTC Jet Rings #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Technical Specifications
Dimensions
72” L x 40” W x 20-3/4” H
(1829 mm) L x (1016 mm) W x (527 mm) H
Drain/Overflow
A: 18-1/2” (470 mm) B: 11” (279 mm)
Cutout
Template Provided Part Number #P188000
Total Weight
H546, H547: 893 lb (405 kg) / 45 lb/sq. ft. (218 kg/m2)
H548: 868 lb (394 kg) / 43 lb/sq. ft. (212 kg/m2)
Operating Gallonage
60 U.S. Gal. (227 Liters)
Product Weight
H546, H547: 143 lb (65 kg)
H548: 118 lb (54 kg)
Skirt Mounting
Not Available
Electrical Specifications Models H546, H547 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models H546, H547 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
Product Shown: Milano™ Whirlpool Bath Left Hand Shown Model: H546
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
#FR67 12/06
© Ja cuzzi Whir lpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuz zi.co m
Loading...