Jacuzzi EE20, Y870, BT65 User Manual
Bellavista™ 6 | WHIRLPOOL BATH and SOAKING BATH
In Italy, it means beautiful view. To you, a wonderful place
to regain relaxed, revitalized perspective.
WHIRLPOOL BATH FEATURES:
• 4 fully adjustable PowerPro® jets
• 4 spinning neck jets
• 2 directionally adjustable AccuPro™ foot jets
• Sculpted armrest and contoured backrest
• Multi-speed motor
• Chromatherapy™ lighting system capable of 256
colors
• Wave Pulse™ system
• All-in-one electronic control panel
• Water-level sensor
• PrO
Detail:
AccuPro™ jets work in concert with a deeply contoured backrest to offer
the ultimate in hydrotherapy.
™ Ozone Sanitation System standard
3
The Bellavista™ whirlpool bath’s perfectly placed PowerPro® and
Bellavista™ 6
WHIRLPOOL BATH
MODEL NUMBER:
EE20, Right Hand
BT65, Left Hand
EXTERIOR DIMENSIONS:
72" long x 42" wide x
26" high
INTERIOR DIMENSIONS:
43½" long x 23½" wide
# OF JETS/TYPE OF JETS:
4 PowerPro® Jets
4 Spinning Neck Jets
2 AccuPro™ Foot Jets
OPERATING GALLONS:
87 gallons
Bellavista™ 6
SOAKING BATH
MODEL NUMBER:
Y870
EXTERIOR DIMENSIONS:
72" long x 42" wide x
26" high
Bellavista™ 6
4" x 4"*
42"
72"
10-1/2"
35-13/16"
11-3/4"
6"
30-1/8"
END VIEW
SIDE VIEW
2"
L
W
H
(Heater)
(Motor)
(51 mm)
MAX. 1/2"**
DRAIN/OVERFLOW
A
B
WH IRLP OOL BATH
EE20
Bellavista™ 6 Whirlpool Bath with RapidHeat™ Right Hand
BT65
Bellavista™ 6 Whirlpool Bath with RapidHeat™ Left Hand
Bellavista™ 6
SOAKER B ATH
Y870
Bellavista™ 6 Bath
• Center Drain
• Accessories / Hardware:
HTA Jet Rings Kit: #M952
BMH Jet Trim Kit: #J869
2 x Neck Jet Rings Trim Kit: #P556
Oval Trim Kit: #N557
Rotary Drain Kit, 30” Cable: #K606
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Product Shown: Bellavista™ 6 Whirlpool Bath
Right Hand Shown, Model: EE20
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILIT Y ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Technical Specifications
DIMENSIONS
72” L x 42” W x 26” H
(1829 mm) L x (1067 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 20” (508 mm) B: 11-3/4” (298 mm)
CUTOUT
Template Provided P/N P187000
TOTAL WEIGHT
EE20: 1130 lb (514 kg) / 54 lb/sq. ft. (264 kg/m2)
Y870: 1200 lb (544 kg) / 57 lb/sq. ft. 279 kg/m2)
OPERATING GALLONAGE
87 U.S. Gal. (341 Liters)
Min. 75 U.S. Gal. (276 Liters)
Max. 98 U.S. Gal. (371 Liters)
PRODUCT WEIGHT
EE20: 130 lb (59 kg)
Y870: 100 lb (33 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS — Model EE20 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD) — Model EE20 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzz i Whirlpo ol Bath • 14880 Monte Vista Avenue • Chino, C A 91710 • www.jacuzz i.com
#FR23 000 10/07
Loading...