Bellavista™ 5.5 | SALON
®
SPA BATH
In Italy, it means beautiful view. To you, a wonderful place to regain relaxed,
revitalized perspective.
WHIRLPOOL BATH FEATURES:
• Multi-speed motor
• 4 fully adjustable PowerPro
®
jets
• 4 spinning neck jets
• 2 directionally adjustable AccuPro™ foot jets
• 900 watt variable speed heated air blower
• Bottom air channels for maximum massage
• 256 color Chromatherapy lighting system
• All-in-one electronic control panel
• Drain-assist purge system
• RapidHeat™ inline heater
• PrO
Detail:
concert with a deeply contoured backrest to offer the ultimate in hydrotherapy.
™ Ozone Sanitation System standard
3
The Bellavista™ whirlpool bath’s perfectly placed PowerPro® and AccuPro™ jets work in
Bellavista™ 5.5
SALON® SPA BATH
MODEL NUMBER:
DY45
EXTERIOR DIMENSIONS:
66" long x 42.22" wide
x 26" high
INTERIOR DIMENSIONS:
46" long x 24" wide
# OF JETS/TYPE OF JETS:
4 PowerPro® Jets,
4 Spinning Neck Jets,
2 AccuPro™ Foot Jets
OPERATING GALLONS:
85 gallons
Bellavista™ 5.5
10"
35-1/2"
11-3/4"
6"
30-1/8"
42"
66"
4" x 4"
Motor
12" H x 24" L
Service Access
Heater
Blower
DRAIN/OVERFLOW
A
B
END VIEW
SIDE VIEW
2"
66"
42"
26"
(Heater)
(Motor)
(51 mm)
(Blower)
SA LON ® S PA BATH
DY45
• Center Drain Location
• Accessories / Hardware:
HTA Jet Ring Kit: #M952
BMH Jet Ring Kit: #J869
2 x Neck Jet Ring Trim Kit: #P556
Rotary Drain Kit, 30” Cable: #K606
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Bellavista™ 5.5 Salon® Spa, Right Hand
Product Shown: Bellavista™ 5.5 Salon™ Spa
Right Hand (DY45) Shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILIT Y ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Technical Specifications
DIMENSIONS
66” L x 42.22” W x 26” H
(1676 mm) L x (1072 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 20” (508 mm) B: 11-3/4” (298 mm)
CUTOUT
Template Provided P/N P187000
TOTAL WEIGHT
1186 lb (538 kg) / 62 lb/ft2 (301 kg/m2)
OPERATING GALLONAGE
85 U.S. Gal. (322 Liters)
PRODUCT WEIGHT
177 lb (80 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N BN60000
© 2007 Jacuzz i Whirlpo ol Bath • 14880 Monte Vista Avenue • Chino, C A 91710 • www.jacuzz i.com
#FQ83 000 10/07
Loading...