signa
the signa® whirlpool bath takes its name from the medieval central italian walled city, lastra a signa.
®
5 whirlpool bath and soaking bath (with 3 tile fl ange)
Like the walled city for which it is named,
Signa® 5 was specially developed and
designed for walled surround spaces.
whirlpool bath features:
• Contoured backrest.
• 4 Fully adjustable TheraPro™ jets
• 2 AccuPro™ foot jets.
• Exclusive Tru-Level™ self-leveling base system
• Slip-resistant bottom.
• Patented Fixed Air Flow System
• Drain included on whirlpool baths
signa® 5 with 3 tile fl ange
whirlpool bath
model number: D560 – RH pump,
D569 – LH pump
exterior dimensions:
60" long x 42" wide x 22" high
interior dimensions:
41" long x 25" wide
# of Jets/type of Jets:
4 TheraPro™ Jets
2 AccuPro™ Back Jets
operating gallons:
42 gallons
signa® 5 with 3 tile fl ange
soaking bath
model number: D578 (w/3-tile fl ange)
exterior dimensions:
60" long x 42" wide x 22" high
interior dimensions:
41" long x 25" wide
Signa™ 5 Whirlpool Bath with 3 Tile Flange
Ordering Information
Product Code:
D560 Signa™ 5 Whirlpool Bath with
3 Tile Flange Right Hand
D569 Signa™ 5 Whirlpool Bath with
3 Tile Flange Left Hand
D578 Signa™ 5 Bath with 3 Tile
Flange
Model: D560, D569
Signa™ 5 Bath with 3 Tile Flange
Model: D578
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
TheraPro™ Jet Rings Kit: #D095
AccuPro™ Jet Rings Kit: #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
*60"
4-1/4"
13" x 5"
Motor
30"
12" H x 18" L
Opt.
Service
Access
42"
12"
5"
Product Shown: Signa™ 5 Whirlpool Bath with 3 Tile Flange Right Hand Model: D560
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
Service Access
Technical Specifi cations
Dimensions
60” L x 42” W x 22” H
(1524 mm) L x (1067 mm) W x (559 mm) H
Drain/Overfl ow
A: 17-1/2” (445 mm) B: 12-1/2” (318 mm)
Cutout
Not Applicable
Total Weight
D560, D569: 708 lb (321 kg) / 40 lb/sq. ft. (197 kg/m2)
D578: 667 lb (303 kg) / 38 lb/sq. ft. (186 kg/m2)
Operating Gallonage
42 U.S. Gal. (159 Liters)
Max. 82 U.S. Gal. (310 Liters)
Product Weight
D560, D569:108 lb (49 kg)
D578: 67 lb (30 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifi cations Models D560, D569 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models D560, D569 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
#FS13 06/07
L
(25 mm)
W
1"
H
SIDE VIEW
END VIEW
DRAIN/OVERFLOW
BATHS WITH 3-SIDED TILE FLANGE
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
A
B
Loading...