Jacuzzi Capella Soaking Bath F933, Capella Whirlpool Bath F934 RH, Capella Whirlpool Bath G775 LH, Capella 60, F934 Specification Sheet
...
capella® 60 corner whirlpool bath and soaking bath
to the Italians, “la capella”—the chapel—is a sacred place. step into our capella® whirlpool, and you’ll understand.
The Capella’s® unique corner confi guration
allows for roomy relaxation.
whirlpool bath features:
• 4 fully adjustable TheraPro™ jets
• 3 directionally adjustable AccuPro™ jets
• Electronic on/off controls
• Patented Fixed Air Flow System
• Sculpted armrest and contoured backrest
• Exclusive Tru-Level™ self-leveling base system
• Drain included on whirlpool baths
capella® 60 corner
whirlpool bath
model number: F934 – RH, G775 – LH
exterior dimensions:
60" long x 60" wide x 20½" high
interior dimensions:
50" long x 34" wide
# of Jets/type of Jets:
4 TheraPro™ Jets,
3 AccuPro™ Foot Jets,
operating gallons:
60 gallons
(mid) x 18" wide(end)
capella® 60 corner
soaking bath
model number: F933
exterior dimensions:
60" long x 60" wide x 20 ½" high
interior dimensions:
50" long x 34" wide (mid)
Ordering Information
Product Code:
F933 Capella®60 Bath
F934 Capella® 60 Whirlpool Bath
Right Hand
G775 Capella®60 Whirlpool Bath
Left Hand
Capella® 60 Whirlpool Bath
Model: F934, G775
Capella® 60 Bath
Model: F933
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
TheraPro™ Jet Rings Kit #D095
AccuPro™ Jet Rings Kit #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
90˚
33-1/2"
60"
Motor
90˚
27"
14" X 4"*
6"
46-5/8"
60"
27"
34-15/16"
43-1/8"
Opt.
Service
Access
Service
Access
Technical Specifi cations
Dimensions
60” L x 60” L x 20-1/2” H
(1524 mm) L x (1524 mm) L x (521 mm) H
Drain/Overfl ow
A: 18” (457 mm) B: 12-1/8” (308 mm)
Cutout
See below
Total Weight
G775, F934: 870 lb (395 kg) / 35 lb/sq. ft. (170 kg/m2)
F933: 845 lb (383 kg) / 34 lb/sq. ft. (165 kg/m2)
Operating Gallonage
60 U.S. Gal. (227 Liters),
Max. 90 U.S. Gal. (341 Liters)
Product Weight
G775, F934: 120 lb (54 kg)
F933: 95 lb (43 kg)
Skirt Mounting
Not Available
Electrical Specifi cations Models F934 & G775 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
Heater
Not Available
Product Shown: Capella® 60 Cor ner Whirlpool Bath Model: F934
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
H
SIDE VIEW
#FQ87 06/07
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
L
END VIEW
2"
A
B
DRAIN/OVERFLOW
25-1/2"
58"
Drain
Overflow
45-9/16"
Capella Cutout
58"
Motor
25-1/2"
Loading...