Jacuzzi Capella K372, K374, Capella 60 Specification Sheet
capella® 60 corner whirlpool bath and soaking bath with integral skirt
to the Italians, “la capella”—the chapel—is a sacred place. step into our capella® whirlpool, and you’ll understand.
The Capella’s® unique corner confi guration
allows for roomy relaxation.
whirlpool bath features:
• 4 fully adjustable TheraPro™ jets
• 3 directionally adjustable AccuPro™ jets
• Electronic on/off control
• Patented fi xed air fl ow system
• Sculpted armrest and contoured backrest
• Built-in tile fl ange and integral skirt with access
panels on skirted models
• Drain included on whirlpool baths
capella® 60 whirlpool bath
(with integral skirt)
model number: K372
exterior dimensions:
60" long x 60" wide x 20½" high
interior dimensions:
50" long x 34" wide(mid) x 18" wide(end)
# of Jets/type of Jets:
4 TheraPro™ Jets,
3 AccuPro™ Foot Jets,
operating gallons:
60 gallons
capella® 60 soaking bath
(with integral skirt)
model number: K374
exterior dimensions:
60" long x 60" wide x 20 ½" high
interior dimensions:
50" long x 34" wide (mid)
Capella® 60 Corner Whirlpool Bath w/Integral Skirt
Ordering Information
Product Code:
K372 Capella® 60 Corner Whirlpool
Bath w/ Integral Skirt
RightHand
K374 Capella® 60 Corner Bath w/
Integral Skirt
Model: K372
Capella® 60 Corner Bath with Integral Skirt
Model: K374
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
AccuPro™ Jet Trim Kit #D095
AccuPro™ Jet Trim Kit #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
90˚
60"
Motor
90˚
14" X 4"*
27"
6"
46-5/8"
33-1/2"
60"
12" H x 18" L
Service Access
27"
34-15/16"
43-1/8"
90˚
Technical Specifi cations
Dimensions
60” L x 60” L x 20-1/2” H
(1524 mm) L x (1524 mm) L x (521 mm) H
Drain/Overfl ow
A: 18” (457 mm) B: 12-1/8” (308 mm)
Cutout
NA
Total Weight
K372: 880 lb (399 kg) / 35 lb/sq. ft. (172 kg/m2)
K374: 855 lb (388 kg) / 34 lb/sq. ft. (167 kg/m2)
Operating Gallonage
60 U.S. Gal. (227 Liters),
Max. 90 U.S. Gal. (341 Liters)
Product Weight
K372: 130 lb (59 kg)
K374: 105 lb (48 kg)
Skirt Mounting
Integral
Electrical Specifi cations Model K372 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
Heater
Not available
Product Shown: Capella® 60 Cor ner Whirlpool Bath with Integral Skir t Model: K372
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
FRONT VIEW
#FQ88 06/07
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
H
SIDE VIEW
1"
A
B
DRAIN/OVERFLOW
Loading...