Allusion® 7236 | SALON™ SPA BATH
An allusion is a “hint,” a “reference.” The Allusion®
Salon™ Spa bath is a true glimpse of the good life.
With
clean, contemporary, minimalist lines, the Allusion®
family of products makes astriking statement — one
that speaks to more than a hint of style.
FEATURES:
• Multi-speed motor
• 4 fully adjustable TheraPro™ jets
• 6 fully adjustable back jets
• 800 watt variable speed heated air blower
• Bottom air channels for maximum massage
• 256 color Chromatherapy lighting system
• Illumatherapy optional
• Drain-assist purge system
• Water-level sensor
• RapidHeat™ inline heater
• All-in-one electronic control panel
• PrO
™ Ozone Sanitation System standard
3
Allusion® 7236
SALON™ SPA with
CHROMATHERAPY
MODEL NUMBER:
BK20
EXTERIOR DIMENSIONS:
72" long x 36" wide x
26" high
# OF JETS/TYPE OF JETS:
4 TheraPro™ Jets
6 AccuPro™ Jets
OPERATING GALLONS:
75 gallons
Allusion® 7236
SALON™ SPA with
ILLUMATHERAPY™
MODEL NUMBER:
BT70
EXTERIOR DIMENSIONS:
72" long x 36" wide x
26" high
# OF JETS/TYPE OF JETS:
4 TheraPro™ Jets
6 AccuPro™ Jets
OPERATING GALLONS:
75 gallons
Allusion® 7236
Heater
5" x 5"*
8-1/2"
12" H x 18" L
Service Access
Opt. Service
Access
12" H x 18" L
Service Access
(Blower)
(Motor)
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION SIDE END
(Heater)
MAX 1/2"**
DRAIN/OVERFLOW
A
B
SA LON™ SPA BATH
BK20
BT70
Allusion® 7236 Salon™ Spa Left Hand with
Chromatherapy lighting
Allusion® 7236 Salon™ Spa Right Hand with
Illumatherapy™ jet lighting
• Left and Right Hand Drain Location
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
Product Shown: Allusion® 7236 Salon™ Spa
Right Hand (BK20) Shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILIT Y ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Technical Specifications
DIMENSIONS
72” L x 36” W x 26” H
(1829 mm) L x (914 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
CUTOUT
Template Provided Part Number: BY20000
TOTAL WEIGHT
1001 lb (454 kg) / 56 lb/sq. ft. (272 kg/m2)
OPERATING GALLONAGE
75 U.S. Gal. (284 Liters)
Min. 65 U.S. Gal. (246 Liters)
Max. 85 U.S. Gal (322 Liters)
PRODUCT WEIGHT
220 lb (100 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
All require a dedicated GFCI protected separate circuit(s).
Blower: 120VAC, 20AMP, 60 Hz. .
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
RapidHeat™: P/N BN60000
** See Install manual for installations instructions.
© 2007 Jacuzz i Whirlpo ol Bath • 14880 Monte Vista Avenue • Chino, C A 91710 • www.jacuzz i.com
#FR1000 0 10/07
Loading...