Jaclo S172 User Manual

INSTALLATION INSTRUCTIONS

Cubix Flush Mount Showerhead

Product Numbers: S172

Please read instructions carefully before beginning the installation.

S172

PARTS

JA CLO.COM

j a c l o i n d u s t r i e s | 129 Derm ody S treet Cra nfo rd, N J 070 16

|

PG 1 CU BIX SHO WERHEAD

p 908 .653 .44 33 | 80 0.8 5 2.3 906 f 908 .653 .17 17 | 80 0.85 2.4 133

PLUMBING EQUIPMENT

1. Water line: arrange your shower box with
the water supply line and coupling for the
showerhead. The coupling must be above the
ceiling. (Fig. 1).

2. Temporarily hold showerhead in desired
location and mark location of mounting holes.

3. Make the 4 attachment holes having a 10 mm
diameter.

4. Make the break-through for the water supply
line for showerhead.

5. Use flexible HP 3024 hose to connect
showerhead to water supply. (Included)

Ensure water supply lines are properly
connected and no leaks are present before
continuing to next step.

6. Permanently install showerhead by inserting
four expansion screws. Hold showerhead in
position, insert mounting screws and tighten in
place.

7. Install press caps over mounting holes.

JA CLO.COM

|

PG 2

CU BIX SHO WERHEAD