ARRANGING FOOD IN THE APPLIANCE ..................... 14
CLEANING AND MAINTENANCE .................................. 15
Defrosting the Refrigerator Compartment................................ 16
Replacing the LED strip ........................................................... 16
SHIPMENT AND REPOSITIONING ................................ 17
BEFORE CALLING YOUR AFTER SALES SERVICE ... 18
Tips for saving energy ............................................................. 20
EN
4
BEFORE USING THE APPLIANCE
General warnings
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: In order to avoid any hazards resulting
from the instability of the appliance, it must be xed in
accordance with the following instructions:
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-out-
lets or portable power supplies at the rear of the appliance.
WARNING: Risk of re / ammable materials
(Symbol ISO 7010 W021)
• If your appliance uses R600a as a refrigerant (this
information will be provided on the label of the cooler)
you should take care during transportation and
installation to prevent the cooler elements from being
damaged. R600a is an environmentally friendly and
natural gas, but it is explosive. In the event of a leak
due to damage of the cooler elements, move your
freezer away from open ames or heat sources and
ventilate the room where the appliance is located for
a few minutes.
• While carrying and positioning the freezer, do not
damage the cooler gas circuit.
BEFORE USING THE APPLIANCE
• Do not store explosive substances such as aerosol
cans with a ammable propellant in this appliance.
• This appliance is intended to be used in household
and domestic applications such as:
- staff kitchen areas in shops, ofces and other working
environments.
- farm houses and by clients in hotels, motels and
other residential type environments.
- bed and breakfast type environments;
- catering and similar non-retail applications.
• If the socket does not match the freezer plug, it must
be replaced by the manufacturer, a service agent or
similarly qualied persons in order to avoid a hazard.
• A specially grounded plug has been connected to the
power cable of your freezer. This plug should be used
with a specially grounded socket of 16 amperes. If
there is no such socket in your house, please have
one installed by an authorised electrician.
EN
5
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
• If the supply cord is damaged, it must be replaced
by the manufacturer, an authorised service agent or
similar qualied persons, in order to avoid a hazard.
• This appliance is not intended for use at altitudes
exceeding 2000 m.
EN
6
BEFORE USING THE APPLIANCE
Old and out-of-order fridges or freezers
• If your old fridge has a lock, break or remove the lock before
discarding it, because children may get trapped inside it and may
cause an accident.
• Old fridges and freezers may contain isolation material and
refrigerant with CFC or HFC. Therefore, take care not to harm
environment when you are discarding your old fridges.
Please ask your municipal authority about the disposal of the WEEE
reuse, recycle and recovery purposes.
Notes:
• Please read the instruction manual carefully before installing and
using your appliance. We are not responsible for the damage
occurred due to misuse.
• Follow all instructions on your appliance and instruction manual,
and keep this manual in a safe place to resolve the problems that
may occur in the future.
• This appliance is produced to be used in homes and it can only be
used in domestic environments and for the specied purposes.
It is not suitable for commercial or common use. Such use will
cause the guarantee of the appliance to be cancelled and our
company will not be responsible for losses incurred.
• This appliance is produced to be used in houses and it is only
suitable for cooling / storing food. It is not suitable for commercial
or common use and/or for storing substances except for food.
Our company is not responsible for losses to be incurred in the
contrary case.
Safety warnings
• Do not use multiple receptacles or extension cord.
• Do not plug in damaged, torn or old plugs.
• Do not pull, bend or damage the cord.
• This appliance is designed for use by adults, do not allow children
to play with the appliance or let them to hang over the door.
• Do not plug-in or out the plug from the receptacle with wet hands
to prevent electrocution!
BEFORE USING THE APPLIANCE
• Do not place explosive or ammable material in your fridge for
your safety. Place drinks with higher alcohol amount vertically
and by closing their necks tightly in the fridge.
• Do not cover the body or top of fridge with lace. This affects the
performance of your fridge.
• Fix the accessories in the fridge during transportation to prevent
damage to accessories.
• Do not use plug adapter
Installing and operating your fridge
Before starting to use your fridge, you should pay attention to the
following points:
• Operating voltage for your fridge is 220-240 V at 50Hz.
• We do not take the responsibility of the damages that occur due
to ungrounded usage.
• Place your fridge in a place that it would not be exposed to direct
sunlight.
• Your appliance should be at least 50 cm away from stoves, Gas
ovens and heater cores, and should be at least 5 cm away from
electrical ovens.
• Your fridge should never be used outdoors or left under the rain.
• When your fridge is placed next to a deep freezer, there should
be at least 2 cm between them to prevent humidity on the outer
surface.
• Do not place heavy items on the appliance.
• Do not place anything on your fridge, and install your fridge in
a suitable place so that at least 15 cm is available on the upper
side.
• The adjustable front legs should stabilized in an appropriate
height to allow your fridge operate in a stable and proper way.
You can adjust the legs by turning them clockwise (or in the
opposite direction). This should be done before placing food in
the fridge.
• Before using your fridge, wipe all parts with warm water added
with a tea spoonful of sodium bicarbonate, and then rinse with
clean water and dry. Place all parts after cleaning.
EN
7
Before using your fridge
• When it is operated for the rst time or after transportation,
keep your fridge in the upright position for 3 hours and plug it
on to allow efcient operation. Otherwise, you may damage the
compressor.
• Your fridge may have a smell when it is operated for the rst time;
the smell will fade away when your fridge starts to cool.
EN
8
THE PARTS OF THE APPLIANCE AND THE
COMPARTMENTS
1
2
3
4
12
11
10
13
5
6
7
8
This presentation is only for information about the parts of the appliance. Parts
may vary according to the appliance model.
1. Control panel
2. Turbo fan
3. Wine rack
4. Fridge shelves
5. Upper crisper cover
6. Upper crisper
7. Bottom crisper cover
8. Bottom crisper
9. Bottle shelf
10. Door shelf (Adjustable door shelf *)
11. Door shelf
12. Egg holder
13. Upper side LED strip *
14. Left / Right side LED strip *
9
14
* In some models
USAGE INFORMATION
Display and Control Panel
123 456
Using the Control Panel
1. Alarm indicator
2. Cooler set value screen.
3. Super Cool mode indicator
4. It enables the setting value of cooler to be modied and super cool mode to
be activated if desired. Cooler maybe set to 8, 6, 5, 4, 2 °C, super cool.
5. It enable the economy mode to be activated if desired.
6. Eco mode indicator
Operating Your Fridge
Super Cool Mode
How Would It Be Used?
EN
9
Press cooler set button (#4 on control panel diagram) until Super cool symbol (#3)
will be seen on the screen. Buzzer will sound beep beep. Mode will be set.
During This Mode:
• Economy mode can not be selected.
• Super cool mode can be cancelled by the same operation of selecting.
EN
10
USAGE INFORMATION
Economy Mode
How Would It Be Used?
• Push "MODE" button (#5 on control panel diagram) until eco symbol appears.
• If no button is pressed for 1 second. Mode will be set. Eco symbol (#6) will
blink 3 times. When mode is set, buzzer will sound beep beep.
• Cooler temperature segments (#2) will show "E".
• Economy symbol and E will light till mode nishes.
During This Mode:
• Cooler may be adjusted. When economy mode will be cancelled, the selected
setting values will proceed.
• Super cool mode can be selected. Economy mode is automatically cancelled
and the selected mode is activated.
• To cancel, you will just need to press on mode button.
Screen Saver Mode
Purpose
This mode saves energy by switching off all control panel lighting when the panel
is left inactive.
How to Use
• Screen saver mode will be activated automatically after 30 seconds.
• If you press any key while the lighting of the control panel is off, the current
machine settings will reappear on the display to let you make any change
you wish.
• If you do not cancel the screen saving mode or press any key for 30 seconds,
control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, rst of all, you need to press any key to
activate the keys and then press and hold the Mode button "" (#5) for 3
seconds.
• To reactivate screen saving mode, press and hold the mode button "" (#5)
for 3 seconds.
USAGE INFORMATION
Door Open Alarm Function
If cooler door is opened more than 2 minutes, appliance sounds ‘beep beep’.
Temperature Settings
Cooler Temperature Settings
• Initial temperature value for the cooler setting indicator is +4 °C.
• Press the cooler button once (#4 on control panel diagram).
• When you rst push this button, the last value will appear on the cooler setting
indicator (#2).
• Whenever you press this button (#4), a lower temperature will be set. (+8°C,
+6°C, +5°C, +4°C, +2°C, super cool)
• When you push the cooler set button until the super cool symbol (#3) appears,
and if you do not push any button within 1 second, super cool will ash.
• If you continue to press the button(#4), it will restart from +8°C.
• The temperature value selected before super cool mode or economy mode is
activated and will remain the same when the mode is over or cancelled. The
appliance continues to operate with this temperature value.
EN
11
Recommended Temperature Values for Cooler
When to adjustInner Temperature (oC)
For cooling the fridge at minimum capacity8
In normal usage4, 5, 6
For cooling the fridge at maximum capacity2
EN
12
USAGE INFORMATION
Warnings About Temperature Adjustments
• Do not pass to another adjustment before completing an adjustment.
• Temperature adjustments should be made according to the frequency of door
openings, the quantity of food kept inside the fridge and ambient temperature
of the place of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient
temperature without interruption after being plugged in to be completely
cooled.
• Do not open doors of your fridge frequently and do not place much food
inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor
of your fridge, when you take the plug off and then plug it on again to operate
it or when an energy breakdown occurs. Your fridge will start to operate
normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated
in the standards, according to the climate class stated in the information
label. We do not recommend operating your fridge out of stated temperatures
value limits in terms of cooling effectiveness.
• This appliance is designed for use at an ambient temperature within the 10°C
- 43°C range.
Climate class Abbient temperature (oC)
o
TBetween 16 and 43 (
STBetween 16 and 38 (
NBetween 16 and 32 (
SNBetween 10 and 32 (
C)
o
C)
o
C)
o
C)
USAGE INFORMATION
Accessories
Fresh dial
When the humidity controler in the closed position, it allows fresh fruit and
vegetables to be stored longer.
In case of the crisper is totally full, the fresh dial is located in front of crisper,
should be opened. By means of this the air in the crisper and humidity rate will be
controlled and endurance life will be increased.
If you see any condensation on glass shelf, humidity control should be taken into
the open positions.
EN
13
Visual and text descriptions on the accessories section may
vary according to the model of your appliance.
EN
14
ARRANGING FOOD IN THE APPLIANCE
• To reduce humidity and consequent increase of frost never place liquids
in unsealed containers in the refrigerator. Frost tends to concentrate in
the coldest parts of the evaporator and in time will require more frequent
defrosting.
• Never place warm food in the refrigerator. Warm food should be allowed to
cool at room temperature and should be arranged to ensure adequate air
circulation in the refrigerator.
• Nothing should touch on the back wall as it will cause frost and the packages
can stick on the back wall. Do not open the refrigerator door too frequently.
• Arrange the meat and cleaned sh (wrapped in packages or sheets of plastic)
which you will use in 1-2 days, in the bottom section of the refrigerator (that
is above the crisper) as this is the coldest section and will ensure the best
storing conditions.
• You can put the fruits and vegetables into crisper without packing.
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.