Wireless
TM
COMF RT
Made in the USA
Improved Comfort
Your wireless thermostat provides automatic control
of the temperature. You can set separate
temperatures for heating and cooling for four time
periods per day (morning, daytime, evening and
night). Or you can operate the thermostat without
using the schedule feature (Permanent Hold mode).
Energy Savings
The schedule feature can save you energy by
reducing the heating and cooling at night and during
the daytime when you are away.
User Manual
Model WCT-32
SYSTEM
FAN
Indicates Morn, Day, Eve
or Night schedule
Space temperature
Indicates the Schedule, Hold or
Permanent Hold mode
Menu key used to set time of
day, daily schedule, calibrate
temperature sensor and
display schedule.
Hold key used to switch
between Schedule and
Permanent H operation
Temperature Setting
Schedule
MENU HOLD
Next key used when setting
time of day and schedules
Up and Down keys used when
adjusting temperature, time of day,
day of the week, program start times
and other options
Heat
AM
ENTER
Set To
AUTO
SYSTEM
FAN
SYSTEM key selects Heat, Cool,
Auto Heat/Cool, Off and
Emergency Heating for a
heat pump application
Inside
Day
Mo
NEXT
Fan key selects Auto or
Cont fan operation
Battery compartment, 2 AA batteries.
Enter key used when setting
time of day and schedules
Factory Schedule
The thermostat is shipped with the following
factory schedule.
Program Start Time
Morning
6:00AM
Day 8:00AM
Evening
Night
5:00PM
10:00PM
Setpoint
Heating
70F
62F
70F
62F
Cooling
78F
82F
78F
82F
Warning!
The thermostat is battery powered and the
batteries should be changed every year or when
the low battery warning is displayed.
Selecting System
Off, Auto, Heat, Cool or EM HT
Press the key to select ,
(heating and cooling) (heating),
(cooling) or (emergency heating if your
system is a heat pump).
Auto
In the thermostat will call for heating or
cooling based on the heating and cooling set
temperatures and the indoor temperature. To view
both the heating and cooling set temperature in
Auto NEXT
LCD will display and then
To
along with with the corresponding set
temperature. Use the and keys to
change the set temperature when the proper
mode is displayed.
System Off Auto
Heat Cool
EM HT
mode, press and hold the key. The
Heat Set To Cool Set
Up DOWN
System
Mode
Heat
Inside
Set To
HEAT
Fan
Mode
Set To
HEAT
AUTO
ENTER
MENU
HOLD
Inside
Th
AM
NEXT
Selecting Schedule or
Permanent Hold
Press the key to switch between ,
Hold Permanent Schedule Schedule
operation automatically changes the heating
and cooling temperature settings at the four
scheduled times– Morning, Day, Evening and
Night.
When in operation, adjusting the
heating or cooling temperature using the
and keys switches to the mode.
After 3 hours the thermostat returns to the
Schedule Hold
time to return to mode.
The mode maintains the
heating and cooling temperatures indefinitely
until the key is pressed which will return
the thermostat to the operation.
Hold Hold
and .
Schedule
Down Hold
mode. Press the key at any
Schedule
Hold Permanent
Hold
Schedule
Heat
Set To
HEAT
AUTO
Schedule
Inside
Day
Th
AM
Up
Schedule
Mode in
Schedule
Day
Th
AM
MENU
HOLD
NEXT
ENTER
Selecting Fan
Auto or Cont
Press the key to select or
(continuous) fan operation. In the
thermostat activates the fan during heating and
cooling calls. In the fan runs continuously
to circulate air.
Fan Auto Cont
Cont
AUTO
Auto
MENU HOLD
NEXT
ENTER
HOLD Key
Setting the Heating and
Cooling Temperature
Press the or key to change the heating
or cooling temperature. Press the Next key to
switch between the heating and cooling
temperature.
2
Up Down
Schedule
Inside
Day
Schedule
Cool
Set To
HEAT
Th
AM
AUTO
Mode in
Day
Schedule
Press the key to display the morning
heating ( ) temperature. Use the or
Down
NEXT
Heat Up
keys to change the temperature.
Heat
Set To
MENU HOLD
NEXT
ENTER
NEXT Key
Setting the Time
and Day
To set the time of day and the day of the week,
press the key and the LCD will display
the hour. Use the and keys to set the
MENU
Up Down
hour. Make sure that the AM or PM is correct.
Press the key to set the minute. Use the
Up Down
Press the key to set the current day of
the week. Use the and keys to select
the day of the week and press the key.
NEXT
and keys to set the minute.
NEXT
Up Down
ENTER
Th
AM
CANCEL NEXT
ENTER
Changing the Schedule
Press the key twice until the LCD
displays the schedule screen shown below with
the current day of the week. Press and hold the
Up Down Morn
or key to change the morning ( )
schedule start time.
MENU
Schedule
Press the key to display the morning
Cooling ( ) temperature. Use the or
Down
NEXT
Cool Up
keys to change the temperature.
Schedule
Continue using the key and the and
keys to set the start time, heating
Down
Morn
Th
AM
CANCEL
CANCEL
NEXT
Morn
Th
AM
NEXT
NEXT Up
Cool
Set To
temperature and cooling temperature for the
, and schedules.
Day Evening Night
After the schedule is completed, you can
press the key which will only save the
Night
ENTER
schedule for the current day or you can
apply the same schedule to other days of the
week by pressing the key.
Schedule
NEXT
Night
Mo
Schedule
MENU
Morn
Th
AM
CANCEL NEXT
PM
CANCEL NEXT
(Monday) will appear on the LCD.
Mo
Continue to press the key to add
additional days of the week. Use the
and keys to turn days ON or OFF.
Down
ENTER
NEXT
Up
The schedule will be applied to the days
that are ON.
3
These days will be displayed on the thermostat.
The example below shows a schedule being
applied to Monday through Friday.
Reviewing the Time and
Temperature Schedule
Press the key 4 times until the first
schedule is displayed as shown below. The
display will show the Monday morning scheduled
start time and heating temperature. setting.
MENU
Schedule
Pressing the key will copy and save the
ENTER
Mo
TuWe Th Fr
CANCEL NEXT
Night
PM
ENTER
schedule for the days of the week selected. After
ENTER
the key is pressed, the thermostat will
return to normal operation To change the
schedule for other days of the week, repeat the
same programming steps.
Schedule
After the schedule is completed, press the
next key and (Monday) will appear on the
Night
Mo
LCD. Continue to press the key and use
Up Down
the and keys to turn days ON or OFF.
Morn
AM
CANCEL NEXT
NEXT
Sa Su
ENTER
The schedule will be applied to the days that are
ON. In the example above, (Saturday) and
Su
(Sunday) have been selected. To save the
schedule, press the key and the
ENTER
Sa
thermostat will resume normal operation. Each
day of the week can have a separate schedule if
required. Just program the schedule and select
the day then press the key.
ENTER
Heat
Set To
Schedule
Continuing pressing the key to display the
Morn
Mo
AM
CANCEL NEXT
NEXT
morning, day, evening and night schedule along
with the heating and cooling temperatures for
each day of the week. Press the key
CANCEL
at any time to exit and return the thermostat to
normal operation.
Low Battery
Indication
If the battery voltage drops to where it could
interfere with reliable operation, the LCD will
alternately display in place of the Inside
temperature. .
MENU HOLD
Lo
Replace batteries immediately
Heat
Set To
AUTO
ENTER
Schedule
Inside
Day
Th
AM
NEXT
5418 Elmwood Avenue, Indianapolis, IN 46203-6025
All rights reserved.
Jackson Systems, LLC 2010
©
Intellectual rights apply.
06-1056-042810
4
Loading...