Thank you for purchasing the Jabra A210 Bluetooth®Adapter.The Jabra A210 provides a
wireless Bluetooth connection between your non Bluetooth mobile phone and your
Jabra Bluetooth headset or speakerphone, so you can enjoy the comfort and
convenience of hands-free communication with your mobile phone.
Drive safely
!
Summary of features
Up to 8 hours talk time and 240 hours standby time
•
Allows call answer and end
•
Supports voice-dialling (subject to phone)
•
Range up to 10 metres (33 feet)
•
Bluetooth version 1.2
•
English
Using a mobile phone while driving creates a distraction to the driver which may increase
the likelihood of an accident.
When using the phone while driving,keep conversations short and do not make notes or
read documents. Before answering calls consider your circumstances. Pull off the road and
park before making or answering calls when driving conditions require (e.g.bad weather,
high traffic density,presence of children in the car,difficult junctions or maneuvres.)
Remember,driving comes first, not the call!
Abide by local laws.
Jabra A210 Overview
1 On / off button
2 Pairing stylus switch
3 Stylus for activating
the pairing button
4 3-position setting switch
5 Blue light (LED) indicating on/off
23
6 Red light (LED) indicating charging
and low battery
7 Belt clip
Also included,Velcro for fixing the
Jabra A210 to back of your mobile phone.
Fig.1
Phone compatibility
The Jabra A210 is compatible with most popular makes of non Bluetooth mobile
phones that have a standard 2.5 mm headset jack.
BEFORE USING YOUR Jabra A210
BLUETOOTH ADAPTER
The Jabra A210 is designed to be simple to operate with a minimum of
control buttons.
Buttons on the Bluetooth adapter and your Jabra headset or speakerphone will provide
alternative operations depending on the length of time they are pressed.
Instruction:Duration of press:
TapPress briefly
PressApprox: 1 second
Press and hold5 seconds
Charge Jabra A210
1
English
The Jabra A210 uses a rechargeable battery that must be charged fully before you use
the adapter for the first time.
1. Use the AC adapter to charge the Jabra A210
from a power socket. (
Jabra adapter to charge the Jabra A210
2. The red light (LED) will turn on when
charging begins. After approximately 2 hours
the red LED will turn off,indicating that charging
is complete.
NOTE: The red LED will flash when the battery is
low.You can continue to use your Jabra A210
Bluetooth adapter while charging.
You are now ready to “pair” the Jabra A210 with
your Jabra Bluetooth headset or speakerphone.
See Section 2)
(
“Pair”with your Bluetooth headset
2
See Fig.2). Only use a
.
Fig. 2
Adjust the setting to suit your phone
3
To optimize the operation of the Jabra A210 with your mobile phone,
adjust the “3-position setting switch”(
Set the switch to position 1 if you are using a Motorola
•
phone
Set the switch to position 3 for all other phone makes
•
If you experience echo when using your phone,move the
•
switch to
position 2
If you continue to hear echo turn down the volume on the headset
•
The headset does not have to be on to adjust the 3-position setting switch.
See Fig. 3).
USING YOUR Jabra A210
BLUETOOTH ADAPTER
To use your Jabra A210 Bluetooth adapter,ensure it is switched on and plugged into
the headset jack in your mobile phone.
NOTE: For complete instructions on operating your Jabra headset,please refer to
the headset’s user manual.
English
Fig. 3
Before you can get started, you will need to pair your Jabra A210 Bluetooth adapter
headset or speakerphone.
with your
1. Turn your Jabra A210 on with a press of the on/off button.The blue light (LED)
shows a burst of flashes and thereafter continues to flash every 3 seconds.
2. Put your Jabra Bluetooth headset or speakerphone into pairing mode by following
the instructions in its user guide.
3. Put your Jabra A210 into pairing mode by pressing the pairing stylus switch marked
( ) with the stylus.When the blue LED turns solid blue the adapter is in pairing
mode.
4. The pairing is complete when the blue LED flashes every 3 seconds.
45
Turning the Jabra A210 On and Off
4
To turn the adapter on,press the on/off button.The blue light (LED) shows a burst of
flashes and thereafter continues to flash every 3 seconds.
To turn the adapter
NOTE: The blue LED will turn off after 5 minutes.To check if your Bluetooth adapter
is on, just tap on the on/off button,and the blue LED will resume flashing. If the
blue LED is not responding, the adapter is turned off.
To save power,your Jabra A210 Bluetooth adapter goes automatically into
standby mode one minute after usage.
Do not use keypad tones with your Jabra A210 as this will affect the
battery performance.
off, press and hold the on/off button for 5 seconds.
Making or receiving a call
5
English
Make or receive calls using your phone’s keypad in the usual way.The call is
automatically transferred to your headset.
NOTE: If the phone does not respond to a ‘tap’of the headset’s answer/end button,
for example ending a call or activating voice-dialing,press the button for a little
longer.Please refer to page 3 for an explanation of Tap,Press and Press and hold.
Experiencing Problems?
6
If you experience problems with the connection between the Jabra A210 and your
Jabra Bluetooth headset or speakerphone, it is advisable to reset the adapter.To
reset your adapter,press the pairing button and the on/off button at the same time.
Need more help?
7
1. Web: www.jabra.com/fscs (for the latest support info and online User Manuals)
2. E-mail: Tech Support: techsupp@jabra.com
3. Phone: 1 (800) 327-2230 (toll-free in USA and Canada)
1. Always store the Jabra A210 with power off and safely protected.
2. Avoid storage at high temperatures (above 45°C / 113°F) – such as direct sunlight.
3. Do not expose the Jabra A210 to rain or other liquids.
Information: info@jabra.com
Storage of the Jabra A210
8
(Storage at high temperatures can degrade performance and reduce battery life).
Low temperatures (down to –10°C / 14°F will shorten battery life and may affect
operation but should not permanently damage the Jabra A210.
Warranty
9
Jabra limited product warranty.Jabra warrants to Purchaser that for a period of one (1) year
after the date of purchase (the “Warranty Period”) of any Jabra Product (“Product”) by
Purchaser,the Product will substantially conform to Jabra’s published specifications for the
Product on the date of Purchaser’s purchase of the Product, subject to the terms herein.
Purchaser shall notify Jabra of any nonconformance during the Warranty Period and obtain
a written return material authorization (“RMA”) and an RMA number for the nonconforming
Product from Jabra and return the nonconforming Product to Jabra,freight prepaid, with a
statement describing the nonconformity.Jabra’s exclusive obligation with respect to
nonconforming Product shall be,at Jabra’s option and expense, to repair or replace such
Product so that it substantially conforms with its published specifications on the date of
Purchaser’s purchase,or, if Jabra,in Jabra’s sole discretion, determines that it is not possible to
repair or replace the Product,Jabra may,at Jabra’s option,refund to Purchaser the purchase
price paid for the Product.THE FOREGOING IS PURCHASER’S SOLE AND EXCLUSIVE REMEDY
FOR BREACH OF WARRANTY BY JABRA WITH RESPECT TO THE PRODUCT.The warranty set
forth above shall not apply to any Product which has not been properly used or handled in
accordance with the instructions supplied by Jabra, lost or misplaced for any reason, or which
has been modified, repaired or altered,except by Jabra or at a Jabra authorized service facility,
or which has been subjected to faulty installation, misuse,abuse, or which the Product defect
is attributable to any failure or damage which is beyond the reasonable control of Jabra.This
warranty is available only to Purchaser, and does not extend to any distributors, retailers,or
other resellers of the Product. This warranty applies only to new Jabra products purchased
from authorized retail sellers. This warranty does not apply to:“open box purchases”, resales by
private parties or any other third party purchases by unauthorized distributors. Transfer of
Jabra products through any unauthorized distributor renders our manufacturer’s warranty
null and void. BUYER BEWARE: any Jabra product sold by a private party or unauthorized
distributor and not by an authorized Jabra retail seller is sold on an “as is”or “with all faults”
basis with respect to Jabra. As such,the entire risk as to the quality and performance of such
products will be with the buyer if the unauthorized distributor will not cover the costs of
repairing defects. Should such products prove defective following their purchase, the buyer
or unauthorized distributor,and not the manufacturer or its authorized retail sellers, assumes
the entire cost of all necessary servicing or repair. Therefore, buyers are strongly encouraged
to purchase Jabra products only from Jabra authorized retail sellers.
THE FOREGOING WARRANTIES ARE THE SOLE WARRANTIES, EXPRESS OR IMPLIED, GIVEN BY
JABRA IN CONNECTION WITH THE PRODUCT,AND JABRA DISCLAIMS ALL OTHER WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. JABRA SHALL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PRODUCT,EVEN IF
JABRA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.THE LIABILITY OF JABRA
HEREUNDER FOR ALL CLAIMS SHALL NOT EXCEED THE AMOUNT PAID BY PURCHASER TO
JABRA FOR THE PRODUCT GIVING RISE TO JABRA’S LIABILITY.
English
67
Certification and safety approvals
10
English
FCC
This device complies with part 15 of the FCC Rules.Operation is subject to the following
two conditions: (1) This device may not cause harmful interference,and (2) this device
must accept any interference received,including interference that may cause
undesired operation.
Users are not permitted to make changes or modify the device in any way. Changes or
modifications not expressly approved by Jabra (GN Netcom) will void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment
generates,uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the
•
receiver is connected
Consult the dealer or an experienced radio/TV technician for help
•
The user must place the base 8”(20cm) or more from any personnel in order to comply
with FCC RF exposure requirements.
Industry Canada
Operation is subject to the following two conditions: (1) This device may not cause
interference and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
The term “IC:”before the certification/registration number only signifies that registration
was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the
equipment.
CE
This product is CE marked according to the provisions of the R & TTE Directive
(99/5/EC).
Hereby,GN Netcom, declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For further information please consult http://www.gnnetcom.com
Please note that this product uses radio frequency bands not harmonised within EU.
Within the EU this product is intended to be used in Austria, Belgium,Denmark, Finland,
France,Germany,Greece, Ireland. Italy, Luxembourg,The Netherlands, Portugal, Spain,
Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland.
Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Jabra is under license. Other trademarks and trade names are those of
their respective owners.
English
8
9
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.