Iwata STUDIO SMART JET IS-850 Instructions Manual

IWATA STUDIO SERIES SMART JET AIR COMPRESSOR — IS-850

SMART JET IS-850

AIR COMPRESSOR

Congratulations on your new purchase! The Iwata Smart Jet Air Compressor delivers quiet, clean,

pulse free air along with superb moisture separation and precise air pressure adjustment.

ASSEMBLY INSTRUCTIONS

3

1. Unpack the compressor and all packaged components. Enclosed you’ll nd:

a. Smart Jet Compressor (#IS 850)

b. Coiled Air Hose (#IS 130)

c. Straight Airhose (#DT I 10)

d. Moisture Trap Assembly (#IS 135)

e. Adapter Kit (for other brands of airbrush)

f. Airbrush Holder

g. Smart Jet Manual

h. Smart Jet Parts Diagram

2. Screw the coiled airhose onto the compressor

3. Screw the other end of the coiled airhose onto the moisture trap’s small screw

4. Screw the straight air hose’s big end onto the moisture trap’s big screw.

5. Screw the straight air hose’s small end onto the airbrush

a. Note: If you’re using a brand of airbrush other than Iwata, use the appropriate adapter from the adapter kit.
You might have to try them out to see which one is right.

GETTING STARTED

4