Iwata NEO TRN1, NEO TRN2 Quick Start Manual

NEO FOR IWATA TRN1 AND TRN2 TRIGGER AIRBRUSH MANUAL

NEED ASSISTANCE

Congratulations on your purchase of a

airbrush.

TRN1 TRN2

TRN1 GRAVITY-FEED

TRIGGER AIRBRUSH

If you have any issues with this product,

call ANEST IWATA-MEDEA (U.S.A.) 503-253-7308

or your local ANEST IWATA aliate before returning to your place of purchase.

ANEST IWATA-MEDEA, INC.

Portland, Oregon U.S.A.
[phone]
www.Iwata-medea.com

ANEST IWATA SOUTH-EAST ASIA CO., LTD.

Bangkok, Thailand
[phone]
www.anest-iwatasoutheastasia.com

ANEST IWATA DO BRASIL COMERCIAL LTDA.

Bairro do Paraiso, Sao Paulo
[phone]
www.anest-iwata.net.br

ANEST IWATA SOUTH AFRICA (PTY) LTD.

Johannesburg, Republic of South Africa
[phone]/2265/2223

ANEST IWATA CORPORATION

Yokohama, Japan
[phone]
www.anest-iwata.co.jp

ANEST IWATA EUROPE S.R.L.

Torino, Italy
[phone]
www.anest-iwataeu.com

ANEST IWATA SHANGHAI

Shanghai, China
[phone] / 15 / 16
www.anest-iwata-sh.com/ja

ANEST IWATA RUS LLC

Moscow, Russia
[phone]
www.anestiwata.ru

TRN2 SIDE-FEED

TRIGGER AIRBRUSH

(M-F 8am-4pm Pacic Time)

ANEST IWATA AUSTRALIA PTY LTD.

Mt. Druitt, NSW
[phone]
www.anest-iwata.com.au

ANEST IWATA (U.K.) LTD.

Neots Cambs, England
[phone]
www.anest-iwata.co.jp

ANEST IWATA MOTHERSON LTD.

Uttar Pradesh, India
[phone] / 14 / 17
www.motherson.com

CENTURY TRADING CO., LTD.

Seoul, Korea
82-2-2163-0300
www.centrading.co.kr

1

QUICK START GUIDE INCLUDED WITH YOUR AIRBRUSH

BEGIN

TRN1

1

Begin by attaching your airbrush hose (Iwata hose
sold separately) to your NEO Trigger airbrush.

Make sure the other end of your airbrush hose is
attached to your air source such as the NEO AIR for
Iwata Miniature Air Compressor (sold separately).

TO AIR SOURCE

PAINT

2

GRAVITY-FEED NEO

TRN1

For the gravity-feed NEO, put a small amount of paint into the color cup
on top of the airbrush (note you have 2 choices of cup size). The airbrush
will also hold 1/32 oz. (1cc) of paint without a cup attached.

For the side-feed NEO, attach one of the cups to the side of the airbrush by
pushing it directly into the airbrush and tightening the lock nut and add
paint. When using bottles, screw the side-feed adapter lock nut onto the
airbrush, then push the bottle (lled with paint) into the side-feed adapter.

CUP

SIDE-FEED NEO

BOTTLE

START AIRBRUSHING

3

TRN1

AIR

AIR

&

PAINT

Turn your air compressor on. Gently pull back on the trigger for air ow
and then pull farther for paint spray. As you pull back on the trigger,
move your airbrush along the surface to be painted – keep moving!

TRN1

The pre-set knob limits how far back you can pull the trigger. Turn the
pre-set to set the desired maximum amount of paint spray.

CLEANING

To clean your airbrush, ush it out with the appropriate cleaner for your
medium or use Medea Airbrush Cleaner, good for water-based mediums,
and spray airbrush until it sprays clear.

2