Iwata IS-875HT, IS-925HT Owner's Manual

IWATA STUDIO SERIES TUBULAR SERIES AIR COMPRESSORS — IS-875HT and IS-925HT

TUBULAR SERIES

AIR COMPRESSORS

Congratulations on your new purchase! The Iwata Tubular Series Air Compressors deliver quiet,

clean, pulse free air along with superb moisture separation and precise air pressure adjustment.

IS-875HT and IS-925HT

ANEST IWATA-MEDEA, INC.

Portland, Oregon U.S.A.
[phone]
www.Iwata-medea.com

ANEST IWATA AUSTRALIA PTY LTD.

Mt. Druitt, NSW
[phone]
www.anest-iwata.com.au

ANEST IWATA EUROPE S.R.L.

Torino, Italy
[phone]
www.anest-iwataeu.com

ANEST IWATA SOUTH-EAST ASIA CO., LTD.

Bangkok, Thailand
[phone]
www.anest-iwatasoutheastasia.com

ANEST IWATA SHANGHAI

Shanghai, China
[phone] / 15 / 16
www.anest-iwata-sh.com/ja

ANEST IWATA RUS LLC

Moscow, Russia
[phone]
www.anestiwata.ru

ANEST IWATA CORPORATION

Yokohama, Japan
[phone]
www.anest-iwata.co.jp

ANEST IWATA (U.K.) LTD.

Neots Cambs, England
[phone]
www.anest-iwata.co.jp

ANEST IWATA MOTHERSON LTD.

Uttar Pradesh, India
[phone] / 14 / 17
www.motherson.com

ANEST IWATA SOUTH AFRICA (PTY) LTD.

Johannesburg, Republic of South Africa
[phone]/2265/2223

ANEST IWATA DO BRASIL COMERCIAL LTDA.

Bairro do Paraiso, Sao Paulo
[phone]
www.anest-iwata.net.br

CENTURY TRADING CO., LTD.

Seoul, Korea
82-2-2163-0300
www.centrading.co.kr

If you have any issues with this product,

call ANEST IWATA-MEDEA (U.S.A.) 503-253-7308

(M-F 8AM - 4:30PM Pacic Time)

or your local ANEST IWATA aliate before returning to your place of purchase.

NEED ASSISTANCE

3

The Carry Handle Is The Air Storage Tank

Oil-Less Piston Compressor

Oil-less means oil-less. The compressor uses PTFE gaskets to seal the compression chamber. This allows the compressor to be quiet without
atomizing oil into the air stream, which makes the compressor virtually maintenance free.

Air Pressure Adjustment Knob

Though not a full regulator, the air pressure adjustment knob allows control of the air pressure. It also doubles as the moisture release valve.

Moisture Trap Assembly

The moisture trap lters out the water and debris down to 5 microns.

Air Pressure Gauge

Don’t guess what pressure you’re spraying at — know it! Your “working pressure” (or “working psi”) is what the gauge shows while you have
your trigger pressed down.

Power Switch

You don’t have to unplug the compressor when you want it to stop, just ip the switch.

Thermal Overload Switch

If the compressor ever decides to overheat, the Thermal Overload Switch will turn o your compressor. If this switch cuts in, it’s saving your
compressor. Let it cool down. The switch will automatically reset itself.

Voltage

If you bought the compressor in the country you’re going to use it, it’s completely ready to go. If you’re going to transfer the compressor to
another country with a dierent voltage, you’ll need a plug adapter and the appropriate power converter. WARNING: Using a plug adapter

and power converter may cause unit to overheat. Any issues resulting from the use of a power adapter and/or power converter are
not covered under the Anest Iwata-Medea warranty.

FEATURES

4