Iwata CM14EC-X1, CM14EC-X2, AIR STREAM-15A Instruction Manual

AIR COOLER

INSTRUCTION MANUAL

MODEL: CM14EC-X1

INTRODUCTION

●Thank you for purchasing our air cooler.

●Each unit has been manufactured to ensure safety and reliability.

●Before initial use, please read this manual carefully and keep it for future reference.

DIAGRAM

PERFORMANCE PARAMETERS

Model

Rating Power

Power

Water tank capacity

Specification

CM14EC-X1

220V~ 60Hz

75W

5L

Cooling only

FUNCTIONS

● Principle of Cooling: Water flows into the cooling pad using a water pump and water

evaporates making the air cooler.

● Electronic control:Safe and durable, attractive appearance.

● Adjustable speed: With three speeds.

● Cool: Adopts the technology of water cooling.

● Deliver wind at a wide angle: Swing the vertical blades automatically,

ASSEMBLY AND ADDING WATER

1. Assembling castors: put the appliance on a flat surface, take out the wrench from foam box, then
assemble the castors.

2. Remove the water tank by pulling it out a third from the body of the unit and add clean water.

a. Pay attention to the level of water in the tank to avoid spilling.
b. The level of water should not be over “MAX” at any time.
c. Put ice or frozen ice pack to the water tank if you want to strengthen the efficiency of

cooling. But the total level of water tank should not be over “MAX” at any time.