Page 1
THANK YOU FOR PURCHASING
Manager’s Chair
OFFICE CHAIRS LIMITED WARRANTY
Page 2
Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website
1 - (Backrest) - 1 Piece
3 - (Base) - 1 Piece
2 - (Seat) - 1 Piece
4 - (Seat Plate) - 1 Piece
5 - (Pneumatic Cylinder) - 1 Piece
7 - (Caster) - 5 Pieces
6 - (Bellows) - 1 Piece
Page 3
HARDWARE LIST
A
B
C
SHORT BOLT
LONG BOLT
ALLEN WRENCH
Step 1
6
A
4 PCS
3 PCS
1 PC
Step 2
5
2
3
7
4
Step 3
Page 4
Step 3
Step 4
B
2
1
4
5
FEATURES
2
1
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat, remove pressure from seat and pull lever (1) up. To lower seat, sit on
chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an adjustment that will
allow the user to change the tension of the tilting feature. Turn knob (2) clockwise
to increase tension and counter-clockwise to decrease or ease the tension. To lock,
return chair to the upright position and push lever (1) in. To unloci, pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
• ARM FLIP UP & DOWN
To flip arms up, simply pull up on arm. To lower arms, simply pull down on arm.
Loading...