Ivy Bronx W005406636 Assembly Instructions

You should have received the following parts in the package. Please ensure that all parts are accounted for.

Parts List

A

LOWER BASE

1 PC

E

PLATE

B

UPPER BASE

1 PC

F

NUT

C

RESERVOIR & PUMP

REPLACMENT PUMP

1 PC

G

RUBBER HOSE

D

BALL

1 PC

H

DECORATIVE RIVER STONES

FPO

1 PC

I

SHIMS

3 PC

Shown To Scale

1 PC 1 PC 1 BAG

ORB FLOOR FOUNTAIN

Care and Instruction Manual

ASSEMBLY INSTRUCTIONS

Thank you for purchasing a water feature,
you are now only minutes away from filling
your home or outdoor living space with
peaceful displays. Our guarantee backs all of
our water features, please do
not hesitate to contact our
Customer Support Team for
resolutions to any parts or
installation concerns.

CUSTOMER SUPPORT TEAM

For any additional questions or concerns please contact our

Customer Support Team.

ASSEMBLY INSTRUCTIONS

Please reference the separate parts list and ensure that
all pieces are included in the package prior to assembly.

SUGGESTED TOOLS

ADJUSTABLE
WRENCH

More than one person may be required to
complete the assembly of this product.

To protect the finish, place all parts
on a soft surface when unpacking.

When assembling ensure that all parts are firmly tightened.

NOT SUPPLIED

Choose a location:

is freestanding water feature can be placed in the
center of your space or against a wall.

is water feature is designed for outdoor use. It
can be used indoors, however splashing may
occur.

Also consider the location of your power source.
e pump has a 10’ cord and should be connected
to a grounded 110V outlet.

For best results the water feature should be placed
on a rm, level surface.

ASSEMBLY INSTRUCTIONS

Place upper base (B) onto lower base (A).

B

A

Feed pump cord through the bases (A & B).

Place reservoir onto base (B).

C

Pump cord

B

A

ASSEMBLY INSTRUCTIONS

Unscrew nut (F) from ball (D).

Use nut (F) to secure plate (E) to ball (D).

Attach rubber hose (G) to bottom of ball (D).

D

E

F

Attach pump (C ) to rubber hose (G).

G

C

D

G

ASSEMBLY INSTRUCTIONS

Place ball assembly (D) into reservoir (C).

D

C

7

FINAL STEPS

Place decorative river stones
(H) into reservoir (C).

Fill reservoir (C) with 1/2
gallon of distilled water.
Water level should stay above
ll line when fountain is
running.

Plug pump (C) into outlet.

Use shims (I) to level the
fountain as necessary.

ASSEMBLY INSTRUCTIONS

PUMP SAFETY & TROUBLESHOOTING

To clean the pump

Unplug the pump from the electrical
outlet. Use a small soft brush or place it

To keep water clean

Periodically change water
to prevent algae buildup.

under a water stream to remove debris.

Tube

Rotor/Impeller

Impeller cover

Regulator

Filter/
Front cover

Suction cup

Back cover

Pump housing

If the pump fails to run:

• Check circuit breaker, or try a dierent outlet.

• Check tubing for kinks and obstructions.

• Clean out any algae buildup.

• Remove the front cover & impeller cover to access the impeller area.
Turn the rotor to ensure it is not broken or jammed.

With low ow rate, the pump will spew or “burp”:

• Check the water level to make sure the pump is completely
submerged, water should always be above the min ll line (not
all water features include min ll line).

If abnormal noise is heard during operation (with water):

• Disconnect the power supply and then remove the pump front
cover and impeller cover.

• Use hand to grip the impeller, gently pull the impeller/rotor
assembly out of the pump housing.

• Rinse the impeller/rotor assembly and the cavity with clean water.
If breakage or surface damage is found in the assembly contact
Customer Service for a part replacement.

ASSEMBLY INSTRUCTIONS

WATER FEATURE WARNINGS &
TROUBLESHOOTING

• Splashing may occur when the fountain is rst turned
on, protect surrounding surfaces as needed.
Do not place the water feature on or near
any surface that can be damaged by water.

• Distilled water is recommended to reduce mineral
deposits, bacteria build up and algae that may damage
the water feature basin and pump.

• To reduce the risk of electrical shock, always disconnect
the power supply before working with the water feature.

• Keep small children and pets away from the water
feature; they can fall into the water feature and drown.

• Once a week inspect water feature, oor and adjacent
wall for moisture build-up and clean as necessary. This is
especially important for humid environments.

• This water feature is designed for outdoor use. It can be
used indoors, however splashing may occur.

More information about water features can be found at

our website.

ASSEMBLY INSTRUCTIONS

FREQUENTLY ASKED QUESTIONS

What should I consider when selecting a water feature?

In addition to your personal style tastes, be sure you have an area for your
water feature that can be safely exposed to water, as splashing can occur.
Also take into consideration what a water feature can add to your
environment: the sound of owing water or decorative lights.

Can my water feature be left outside over winter?

This water feature is rated for outdoor use; however certain weather
conditions may adversely aect your water feature. If the temperature in
your region is at risk of dropping below 33° F, your water feature should
be “winterized” before the cold weather arrives. To winterize:

1. Fully drain your water feature of all water.

2. Disconnect the hoses, pumps, and lights.

3. Clean all components thoroughly, paying special attention to the
pump to prevent residue build-up.

4. Allow all parts to dry.

5. Store parts and water feature in a safe, weather-free environment.

What kind of water should I use in my water feature?

The best water for your water feature is distilled water. This can help
prevent and reduce bacteria and algae buildup. If you do not use distilled
water, more maintenance will be necessary to keep the water feature clean.

How do I clean my water feature?

Oils, dirts, and algae can all build up on the water feature over time. The
best way to restore your water feature to its original state is to empty all
the water from the water feature and use a mild soap (like dish detergent)
and an acrylic brush to clean all the parts.

ASSEMBLY INSTRUCTIONS

FREQUENTLY ASKED QUESTIONS CONTINUED

How much water do I need to keep in the water feature?

Where possible in our water features, we have included ll lines to help
you visualize the water level required for proper function. If your water
feature does not include ll lines, please check the instruction manual for
water capacity. The most important aspect to keeping your water feature
functioning is to insure the pump is submerged in water at all times to
prevent damage to the pump.

How often will I need to ll my water feature?

Over time, the water level in your water feature will recede. This is due to
evaporation, and the speed at which your water feature will need to be
lled depends greatly on your environment- the humidity, if your water
feature is in the sun, how often you run the water feature, etc. We
recommend checking the water level before running the water feature to
insure the pump is submerged in water.

I cannot nd my installation instructions. Where can I nd another
copy? Installation and assembly instructions can be found online at our

website.

Can lights be turned o separately from the water feature?

Water features that include lights will have a separate plug and switch for
the lights. They do not have to be plugged in or turned on to run the
water feature.

My pump is making a loud noise. How do I x that?

1. Be sure the pump is fully submerged in water. If it is not, and pulling
in air, it will make unwanted noise.

2. Check to make sure the pump is not touching the water feature
anywhere other than the bottom. If it is up against the side wall or
another part, the vibration from the pump can cause unwanted noise.
If moving the pump away from other parts does not work, try placing a
sponge or other soft material between these areas to pad the pump.

ASSEMBLY INSTRUCTIONS

FREQUENTLY ASKED QUESTIONS CONTINUED

How do I change my pump speed? Depending on the type of pump,
you will need to either move the slider or turn the knob.

Flow control valve

Maximum
Minimum

How do I clean my pump?

1. Disconnect the power supply and then remove pump cover/lter.

2. Gently pull impeller/rotor assembly out of the pump housing

3. Rinse the impeller/rotor assembly and the cavity with clean water.

4. If your pump comes with a sponge lter rinse this with clean water.
Algae buildup can be ushed out with a garden hose.

How do I level the water feature?

For the water to ow properly, it is critical the water feature is level. If
your water feature will be placed in an area with uneven ground, use a
level and leveling shims to help level the water feature. Shims are
wedge-shaped plastic parts that can be placed between the water feature
and the ground to create a level surface.

My tube is too long. What can be done to x this?

The hose can be cut with a sharp blade or pair of scissors to the desired

length.