Page 1
IMPORTANT SAFETY INSTRUCTIONS
For any replacement parts or installation issues, please Contact Us!
• To avoid injury or damage, mount only on a surface that is sturdy.
• To avoid electric shock, make sure the electricity is turned off at the main
circuit breaker panel. If you are replacing an existing fixture, turn off the
following in order: fixture, wall switch, and main fuse or breaker box.
Note: Some types of fuses must be unscrewed to shut the power off.
• If you are unclear as to how to proceed, please consult a licensed
electrician.
UNPACK THE FIXTURE: Check the contents of the box. Box should contain all items on the parts diagram.
INSTALLATION INSTRUCTIONS
1. Secure Mounting Plate (A) to the junction box (not included) using Mounting Screws (B) provided. Ensure
Mounting Plate (A) is positioned with the brackets on the left and right.
2. Using the wire graph below, connect the appropriate wires from the fixture to the corresponding wires in the
electrical junction box (not included) and secure Wire Connectors (C).
A. Connect the ground wire (bare copper or green) from
your fixture to the:
1) ground wire in the junction box, or
2) ground screw in the junction box
B. Connect the BLACK house wire to fixture hot wire
that corresponds to diagram (black, round &
smooth, white/grey with tracer, brown/gold without
tracer).
C. Connect the WHITE house wire to fixture neutral wire
that corresponds to diagram (white, ribbed/ridged,
white/grey without tracer, brown/gold with tracer).
3. Place all wires and Wire Connectors (C) back into the junction box.
Page 2
4. Place Backplate (E) against the wall, ensuring holes on each side of Backplate (E) align with the holes on
Mounting Plate (A). Secure Backplate (E) to Mounting Plate (A) with Backplate Screws (D).
5. Install light bulbs (not included) into Sockets (F).
6. Slide Glass Shades (G) over the bulbs onto Sockets (F) and twist into place.
Note: Twist shade like a glass jar to ensure it is locked.
Enjoy your new fixture!
Loading...