Page 1
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJ ON CTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box. Carefully unpack your new fixture
and lay out all the parts on a clear area. Be care not to lose any
small parts necessary for installation.
2. Attach the mounting plate to the Junction Box with the two junction
box screws as shown. The side of the mounting plate marked "GND"
must face out. The junction box is not included.
3. Slide the electrical wires through the tubes(D)/(C)/(B) and
canopy(A).
4. Raise the tube (D) to the top pipe thread of shade(E), by turning it
clockwise until tight. Raise the tubes(C)/(B) and canopy(A) to the
pipe thread in order, then by turning it clockwise until tight.
5. While holding the lamp body towards the ceiling, connect the
electrical wires as Shown in Fig.2, making sure that all wire nuts are
secured. You may have to wrap the connections with electrical tape.
If your outlet has a ground wire (green or bare copper), connect the
fixture ground wire to it. Otherwise connect fixture’s ground wire
directly to the mounting plate with the green screw provided. After
wires are connected, tuck them carefully inside the Junction Box.
6. Install the canopy (A) onto the junction box, aligning screw hole on
mounting plate with mounting holes in canopy and lock it securely
with the screws.
7. Install the light bulbs(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE SPECIFIED
WATTAGE!
Your installation is now complete. Return power to the junction
box and test the fixture.
49110 49181 49182 49184 49185 49186 49544
FIG.1
49544
A
49181
B
C
49182
D
E
49184
49185
49186
FIG.2
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
FIXTURE
WIRES
BLACK
FIXTURE
WIRES
WHITE
HOUSE
WIRES
Black
(Hot)
Thank you for purchasing a LIVEX product.
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
GREEN
Thread
(Ground)
Green or
Copper(Ground)
HOUSE
WIRES
Bare
Or visit us online at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20190749110
Loading...