Page 1
ADJUSTABLE BAR STOOL
Page 2
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service
In order to assist you in a timely manner, please have the following information ready:
Model # Part Number or Letter
Purchased at Date of Purchase
If you wish to return the product, please contact the retailer where the product
was purchased.
Page 3
IMPORTANT: Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
Requires 2 people for ease of assembly.
SAFETY INFORMATION
CARE and MAINTENANCE
Wipe regularly with clean water and a damp, clean, soft white cloth.
General cleaning can be done as needed with a mild detergent and water
solution. Always rinse with clean water and dry.
For heavy soiling, dampen a soft white cloth or soft bristle brush. Use care as
scrubbing can damage the surface.
More difficult stains can be treated, but this should be occasional, not daily,
cleaning. ANY cleaning solution used must be removed with clean water and a
clean white cloth. Cleaning residue left on the material can cause it to dry out
and crack, or affect the color.
DO NOT use any cleaners with corrosive ingredients (lye, acids or ammonia).
Page 4
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
A
D
CHAIR
QTY 1
E
FOOTREST
QTY 1
CB
GAS LIFT
QTY 1
BASE
QTY 1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service
PLASTIC RING
QTY 1
Page 5
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
1
BOLT
M6 X 14mm
QTY 4
2
ALLEN KEY
M6
QTY 1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service
Page 6
ASSEMBLY
STEP 1
Remove the Gas Lift cap from the Gas Lift (C).
Page 7
ASSEMBLY
STEP 2
Place the Base (D) on a flat smooth surface.
Attach the Plastic Ring (E) to the Base (D).
Attach Gas Lift (C) to the Base (D).
Page 8
ASSEMBLY
STEP 3
Place the Chair (A) on its back on a flat smooth surface.
Attach the Footrest (B) to the bottom of the Chair (A) with
four Bolts (1).
Use Allen Key (2) to tighten.
Page 9
ASSEMBLY
STEP 4
Place the Chair (A) right side up on the Gas Lift (C).
Page 10
ASSEMBLY
STEP 5
To raise the seat, lift your weight off the seat and reach underneath the
right side of the Chair to lift the handle up slowly with a clockwise twisting
motion to allow the Chair to rise to desired height.
To lower seat, lift the handle slowly with a clockwise twisting motion while
seated.
Page 11
WARRANTY
Thank you for purchasing a product. These products have been made to
demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 12 months from the date of
purchase. This warranty does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.
Loading...