Page 1
ASSEMBLING
Listed
ASSEMBLING
ASSEMBLING
ASSEMBLING &
INSTALLATION
&
INSTALLATION
&
& INSTALLATION
INSTALLATION INSTRUCTIONS
For
Wall
For
Wall
For Wall
Wall Mount
For
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
Mount
Mount
Mount Light
Light
Light
Light Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
THE
FIXTURE
THE
FIXTURE
THE FIXTURE
FIXTURE
Installation (see fig.1)
1. Disconnect power at main electrical panel before
installation.
2. Attach the mounting plate to the junction box using two
junction box screws . The side of the mounting plate
marked “ GND ” must face out.
3. Guide fixture wires through hole in center of mounting
plate.
4. Follow wiring instructions carefully (see fig.2)
5.
Install
5.
Install
5.
5. Install
Install the
6. Attach the glass shield (D) to the lamp holder, aligning the
7. Insert the glass shade (B) to the fixture body (C), aligning
8 . Attach the fixture body ( C ) over the mounting plate ，
the
light
bulbs
(F,
E11
mini
the
light
bulbs
(F,
the light
light bulbs
bulbs
included)
included)
included)
included) in
specifications.
specifications.
specifications.
specifications. NOTE:
MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM WATTAGE
flute with the screw hole of the lamp holder in side, then
lock it securely with screw ( E ) .
the hole with the screw hole of the hook in side, then lock
it securely with knob screw ( A ) .
aligning the backplate holes with screw hole of the
mounting plate in side , then lock it securely with
mounting screw.
in
accordance
in
accordance
in accordance
accordance with
NOTE:
NOTE:
NOTE: DO
WATTAGE
WATTAGE
WATTAGE RATING!
(F,
(F,
DO
DO
DO NOT
RATING!
RATING!
E11
E11
E11 mini
RATING!
candela
mini
candela
mini candela
candela ,
with
with
with the
NOT
NOT
NOT EXCEED
,
75W
,
75W
, 75W
75W ,
the
fixture
the
fixture
the fixture
fixture
EXCEED
EXCEED
EXCEED THE
THE
THE
THE
Wiring (see fig.2)
1. Connect the electrical wires as follows. Connect the
Black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the white
(neutral) house wire. Make sure all wire nuts are secured.
You
may wrap the connections with electrical tape. If
your outlet box has a ground wire (green or bare copper)
connect fixture’s ground wire to it. Otherwise attach the
bare copper fixture wire to the green ground screw on the
,
no
,
no
, no
no
mounting plate .
2.Tuck the wire connections neatly into the wall junction
’
s
’
s
’
’
s
s
box.
F ig.1
Fig. 2
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or
Bare Copper(Ground)
U
L
R
Loading...