Ivy Bronx W002590605 Installation & Assembly

Page 1
WALL SHELF
ASSEMBLY MANUAL
We support the proper recycling of waste materials, and
encourage you to properly recycle any leftover or waste
materials. Help us preserve the environment for a better WORLD.
Thank you for choosing our products.
Page 2
Dear Customer, This product has been extensively tested prior to shipment. However, some components may be missing or damaged during transportation. If this happens, please send a request for the missing or damaged parts. Use the included service card to describe the part completely and we will replace the part as quickly as possible. Before assembling, check the included parts list to verify all parts are available. Prior to assembly, clean all components with a damp cloth. Lift the product with a minimum of two people. For longer distances, carry the product while inside the package, if possible. Product surfaces can be easily cleaned with a damp and soapy cloth, or household cleaners. Do not expose the product to direct and extreme heat, cold, or humidity, as this may damage the product.
Page 3
ATTENTION !!!
ACCESSORY LIST
This unit should
be assembled
by two people
A09
4x50 YHB Screw
16x
A10
3,5x18 YHB Screw
8x
A04
Cover Sticker
8x
GENERAL VIEW
A08
Ø8 Anchor
8x
A07
‐L‐ Bracket
8x
Page 4
02
ASSEMBLY MANUAL
A09
4x50
YHB Screw
01
A09
4x50
YHB Screw
02
01
02
A09
4x50
YHB Screw
A09
01
4x50
YHB Screw
02
01
Page 5
A02A08
A02A07A02A07
A10
64mm
A09
64mm
A04
IMPORTANT; The screw supplied with the anti-topple bracket is to be used
only for fixing the anti-topple bracket to the furniture. In addition, you will
need to choose a screw or fitting which is suitable for securing the bracket
to the type of walls you have. If you are unsure about what type of screw to
use, contact your local hardware store.
Page 6
This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times.
Do not overload the unit. Each shelf has a recommended capacity of 13 pounds, and the total weight on the unit should not exceed 39 pounds for wall shelves.
Do not climb, step, or stand on the unit.
Do not mount or attach items to the front, rear, or sides of the unit. This can cause the
unit to become unbalanced and fall.
Do not stack units.
All units must be secured individually to wall studs using hardware provided. If wall
studs are not accessible, consult your local hardware store for appropriate mounting hardware.
We recommend you hand-tighten screws. Use care not to overtighten if using power tools. Follow proper safety procedures if using power tools and/or ladders.
We recommend you protect your work surface during assembly to prevent scratching or damage to tabletops, wood floors, etc.
Failure to follow the instructions listed here could result in bodily injury or damage to
personal belongings. Use caution and follow safety procedures.
Loading...