Page 1
PENDANT CHANDELIER
ASSEMBLY INSTRUCTIONS
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT
TO DAMAGE ANY COMPONENTS.
PROFESSIONAL INSTALLATION RECOMMENDED
Page 2
PENDANT CHANDELIER
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
B
A
1.
Measure area and determine desired hanging height.
Product comes with three (3) 12”, one (1) 8” and one (1)
2.
4” hard stems [A] for adjustable hanging height. Determi-
ne the stems you will use to achieve desired height.
(Threads are removable from the stems and thread
removal may make it easier to thread wire.)
Thread wire [E] from socket part [B] through first stem [A].
3.
Continue to add stems, threading the wire and screwing
each stem together. Repeat as necessary to achieve
desired hanging height.
x3
x9
I
H
C
E
G
x3
D
F
x2
C
D
F
A
Detach mounting plate [C] from canopy [D]. Thread wire
4.
[E] through canopy.
Mounting plate [C] will attach to ceiling junction box.
5.
Install light to ceiling. We recommend installation by a
6.
qualified electrical professional. Canopy nuts [F] are used
to tighten light to ceiling.
Install bulb 60W max (not included). Install the glass
7.
shade [G] onto socket part [B] and tighten by using glass
screws [H].
8.
Add screw on decorative rods[I] to bottom of light socket.
Turn off switch before replacing a bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
E
G
H
B
I
Loading...