Page 1
KITCHEN ISLAND CHANDELIER
ASSEMBLY INSTRUCTIONS
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT
TO DAMAGE ANY COMPONENTS.
PROFESSIONAL INSTALLATION RECOMMENDED
Page 2
KITCHEN ISLAND CHANDELIER
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS.
C
A
D
B
1.
Measure area and determine desired hanging height.
2.
Adjust the length of the cord by loosening the screw on
the stem of the canopy with the provided screwdriver [A].
Re-tighten screw after desired cord length is achieved.
3.
Feed the support wires into the canopy (To lengthen
support wires compress neck [B] into canopy and pull wire
out).
x3
E
x4
G
F
B
A
C
D
E E
x9
H
Detach mounting plate [C] from canopy [D] by removing
4.
canopy screws [E].
5.
Mounting plate [C] will attach to ceiling junction box.
6.
Install light to ceiling. We recommend installation by a
qualified electrical professional. Canopy screws [E] are
used to tighten light to ceiling.
7.
Install the Glass shades [F] onto socket [G] and tighten by
using shade screws [H]. Install bulbs 60W max (Not
included).
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
G
H H
F
Loading...