Page 1
Allen Wrench
(Included)
Phillips
Screwdriver
(Not Included)
2 - Persons
Recommended
1 / 8
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Page 2
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you
purchase our product. We fully stand behind our products from start to finish.
CHECK
BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
2 / XXXXXXX8
Page 3
PRE ASS EM BLY
INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwo rk
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
3 / XXXXXXX8
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Page 4
4 / XXXXXXX8
Page 5
QUEEN BED
Headboard
Bed Slat
#2 2pcs
#7 4pcs
Bed Slat Support
230X30X30mmL
#B 14pcs
#3 2pcs
Headboard Leg
(L&R)
#8 1pc
Back Center
Support
Footboard
Back Rail
Support
Side Rail
Allen Key m5
CSK m4 x 32mm
CSK m4 x 25mm Panhead Screw
m3.5 x 20mm
5 / 8
Page 6
1
Part #1 x1pc
Part #2 x2pcs
Part #3 x2pcs
Hardware #B x4pcs
Hardware #D x8pcs
ASSEMBLY INSTRUCTIONS
Attach Head Board Leg ( #3 ) to Head Board ( #1 ) then secure by
using screws ( #B )
L
R
#3
x4
#2
#B
2
Part #8 x1pc
Part #9 x1pc
Hardware #B x2pcs
Hardware #C x8pcs
#1
Attach and tighten Headboard Corner Panel (#2)
to the Headboard and secure by using Panhead
screw (#D).
Attach Back Rail support (#9) to the Headboard Leg (#3) and
secure by using screws (#B)
Nail Leg
#9
#3
x8
#D
#B
#8
Attach Back center support (#8) to the Headboard Leg (#3) then
secure by using screws (#C)
6 / 8
x2
#C
x8
Page 7
3
Part #4 x1pc
Part #5 x2pcs
ASSEMBLY INSTRUCTIONS
Align side rails (#5) to thebolts of the Headboard Leg(#3) and
footboard (#4). Fully tighten the bolts.
#1
4
Part #6 x4pcs
Part #7 x4pcs
#5
#5
#5
#A
#4
#6
#7
Attach support legs (#7) to the slats (#6), then adjust
the leveler according to ground level.
7 / 8
x 4
#6
#7
adjustable glider
Page 8
5
Hardware #B x8pcs
ASSEMBLY INSTRUCTIONS
Align slats (#6) evenly to the side rails,
then secure by using screws (#B)
6
#6
#B
x8
8 / 8
Loading...