Page 1
Canopy Installation
To be installed by a certified electrician!
Ensure that the power is off.
ENGLISH
Connect the mounting bracket to the junction box
A
(required!). Add screws as needed.
Connect the wires.
B
Align the canopy with the screws, push up and rotate.
C
D
Tighten all the screws.
NOTE: do not release the canopy until the screws have been tightened.
A
B
C
Pendant Installation
Do not attach pendants until canopy installation
is completed.
Final step
The stabilizer disk clips onto the wire
and slides down into position.
A
Slide part A up the wire.
Hold part A while you fully thread on part B.
B
(may require assistance)
Insert the LED bulb(C) into part B.
C
thread part D into part B.
D
Please note that the bulbs run in series,
so they will only function with all LED bulbs correctly installed.
Part A
Part B
Part C
Part D
Turn on the light
Loading...