ASSEMBLY INSTRUCTIONS
STEP 3 :
KING (4+8)
No ITEM Qty
A
Headboard
1 pc
B
Footboard
1 pc
C
Headboard Leg (L/R)
2 pcs
No ITEM Qty
1
Csk M4 x 32mm
8 pcs
2
JCBC M6 x 30mm
6 pcs
3
SPRING WASHER 1/4"
Rbw
6 pcs
4
Flat Washer 1/4"ID x
13mmOD Blk
6 pcs
5
ALLEN KEY
m4x65mm Blk
1 pc
6
ALLEN KEY
m5x65mm Blk
1 pc
Attach Head Board Leg ( B ) to Head Board ( A ) as shown using
JCBC BOLT( 2 )with Spring Washer (3), Flat washer (4)
and securing with ALLEN KEY ( 5 ).
STEP 1 :
Hook SIDE RAIL (F) TO HEAD BOARD (A) closely and push down to fit. repeat step 2 with
other end of rail to hook onto FOOTBOARD (B).
STEP 2 :
Tighten the 4 Corner with Allen Key (6).Fix the Bed Slat Support Leg (E ), to Bed Slat (D) as shown . Install the bed slat ( D ) to side
rail ( F ) and tighten with Csk Screw ( 1 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR
THE BED TO OBTAIN PERFECT STABILITY)
F
6
1
D
x8
STEP 3.1 :
STEP 3.2 :
STEP 3.2 :
E
RIGHT
LEFT
C
5
2
3
4
x6
Push the side rail(F) meet with wooden
slat(D) and fix the CSK screw (1)
by using the Screw Driver.
D
Bed Slats
4 pcs
E
Bed Slats Support
8 pcs
No ITEM Qty
F
Side Rail
2 pcs
D
E
leveler
STEP 3.2 :
STEP 3.3 :
E
leveler
F
F
A
D
BACK VIEW
6
F
B
A
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
Loading...