Page 1
ELBOW TUBE
1pc
ELBOW TUBE
2pcs
LAMP HOLDER
FRAME
1pc
TUBETUBE
CANOPY
COVER RING ACCESSORYCOVERCOVER
TUBE
Ø11.7*380 Ø11.7*305 Ø11.7*230 Ø11.7*100
TUBE TUBE
Ø61*5.5 Ø61*5.5 Ø58*22 Ø15*2
Ø12*20
1pc
ASSEMBLY INSTRUCTION
1pc 1pc 1pc 1pc
1pc 1pc 2pcs 1pc
1pc 1pc 2pcs
1
NUT AND WASHER
1/8*27
WASHER
Ø12*Ø4.5*1
SCREW
5/32"-32T*25
2pcs
SCREW
5/32"-32T*15
4pcs
WIRE CONNECTOR
Ø9.9*17.7
2pcs
WIRE CONNECTOR
Ø8.6*15.2
1pc
GLASS TUBE
Ø32*175
4pcs
BULB
4pcs
Page 2
IMPORTANT SAFETY INSTRUCTIONS
THIS PENDANT LAMP HAS A POLARIZED PLUG (ONE BLADE
IS WIDER THAN THE OTHER) AS A SAFETY FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES
NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT
STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN
BE FULLY INSERTED. DO NOT ALTER THE PLUG.
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
2
Page 3
Q
B
A
C
B
A
C
N
K
I
L
M
J
Take elbow tube(B) on the surface of elbow tube(A) and use the screw(Q) to fit it.
Assemble the tube together with the lamp holder frame(C).
Assemble the lamp holder frame(C) and the elbow tube with nut and washer(N)
and put on the cover(J). Secondly, fit on the ring accessory(L) and tube(M).
Lastly, assemble cover(I) together with the cover(K).
3
Page 4
J
L
M
A
B
C
K
I
E
F
D
H
G
O
P
S
R
D
H
Loosing the accessory which is on the canopy(D) and taking out the ceiling plate,
and then assembling the tube(E,F,G,H) on the tube(M), last, fit the canopy(D) on
the tube(H).
Assemble the ceiling plate with the terminal box with screws(P) and washers(O)
and using wire connector(R) to connect the "L" wire and "N" wire separately and
then using wire connector(S) to connect the ground wire.
4
Page 5
E
J
L
M
A
B
C
K
I
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a
dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check
that all connections are tight.
F
G
H
D
Cleaning & Care
T
U
Fit on the bulb(U) and glass tube(T).
5
Loading...