Page 1
INSTALLATION INSTRUCTION
MOUNTING THE FIXTURE (FIG. 1)
Fig.1
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Mounting plate * 1
Mounting screw * 2
Ground screw *
Fig.2
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
1. Shut off the power supply at the fuse box or circuit
breaker. If necessary, remove the old fixture from wall.
Including the mounting hardware.
2. Carefully remove the new fixture from the carton and
check that all parts are included as shown in the
illustration.
3. Attach the mounting plate (E) to the outlet box using the
outlet box screws (F). The side of the mounting plate
marked “GND” must face out.
4. Follow the wiring instructions carefully (See Fig.2).
5. Attach the fixture wall plate (G) over the mounting plate
(E) by protruding the mounting screws (H) through the
mounting holes on the wall plate (G) and securing with
ball nut (D) tightly.
6. Up to now, the customer have two options to assemble
the glass shade as you like, as follows:
Option A: Install the glass shade (B), socket cover (L),
glass shade (K) over the socket (C) in order and secure
with cushion ring (J) and socket ring (A) using the socket
ring tool (I).
Option B: put the glass shade (B) over the socket (C)
and secure with socket ring (M).
7. Install the bulb (not included) in accordance with fixture’s
specifications.
(DO NOT EXCEED THE
MAXIMUM WATTAGE RATING!) (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!).
CONNECTING THE WIRES (FIG. 2)
1. At this point, connect the electrical wires as shown in
Fig. 2, making sure that all wire connectors are secured.
If your outlet box has a ground wire (green or bare
copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly to
the mounting strap using the green screw provided.
2. Tuck the wire connections neatly into the wall outlet box .
Your installation is now complete. Return power to the
junction box and test the fixture.
SOCKET RING
1
Loading...