Page 1
Assembly and Installation Instruction
Warning!!! Shut Power Off At Fuse or Circuit Breaker .
1. Carefully unpack your new fixture and lay out all the parts
on clear area. Take care not to loose any small parts
necessary for installation.
3. Pass fixture wires through swivel in Canopy and screw top
end of pipe assembly into swivel. Connect the Pipe to the
Fixture Nipple
4. Attach two Mounting Screws to Mounting Strap and
tighten with Hex Nuts.
5. Secure Mounting Strap to Outlet Box by threading two
Outlet Box Screws through the key hole.
6. Connect the White Fixture Wire to the White Supply Wire,
Connect the Black Fixture Wire to the Black Supply Wire.
Make
sure all Wire Connectors are secure and do not easily pull off
with the slight tug. Connect Ground Wire from the Outlet
Box and Fixture Ground Wire to the Mounting Strap with
the Green Grounding Screw provided.
7. After the wires connected, raise Canopy against ceiling
and tighten with Finials.
8. Place the threaded rod and finial through the Mica shade and
tighten with the diffuser, washer, nut, and cap ,securing the
finial in place .
9. Insert Bulb to Socket. Return the power to the Outlet Box and
test the fixture. Your installation is now complete.
FINIAL
CANOPY
BLACK FIXTURE WIRE
HAND TOOL
OUTLET BOX SCREW
GREEN GROUNDING
SCREW
FIXTURE GROUND WIRE
WHITE FIXTURE WIRE
HEX NUT
MOUNTING
SCREW
WHITE SUPPLY WIRE
MOUNTING STRAP
SUPPLY GROUND WIRE
BLACK SUPPLY WIRE
FIXTURE NIPPLE
PIPE
NIPPLE
SHADE
CAP
FINIAL
NUT
WASHER
DIFFUSER
THREADED
ROD
HAND
TOOL
SOCKET
2. This fixture include three sizes of pipe:
(3"X 1pc, 6"X 1PC, 12"X 3PCS) to be connected into
various height. Choose desired installation height and
thread fixture wires through each pipes to be used. Screw all
pipes together until secure.
Page 2
Loading...