
Label Picture Description QTY
Caution: You must read this before you proceed

Label Picture Description QTY
Before Beginning Assembly:

This Single Chair has multiple parts and may require up to 30 minutes to assemble.To
give you an overview of the Single Chair parts,the above picture is to help you put the
various parts into perspective.Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Open the carton and place all the parts on a clean, non-marring surface.
ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting
positions preventing easy assembly.
The PE wicker should never be cut, but moved away from the mounting positions.
Attach Right Armrest / Leg(A) to the Seat(C) using Bolts(②) and Washers(⑤ ) with Allen
Key(①) as shown in the picture above.
Do not fully tighten the Bolts.
Backrest(D)
Right Armrest/Leg(A)
Seat cushion(E)
Seat (C)
Left Armrest/Leg(B)
FRONT FACING

Attach Backrest(D) to Seat(C) using Bolts(③&⑥) and Washers(⑤) with Allen Key(①) as
pictured above.
Do not fully tighten the Bolts.
Attach Left Armrest / Leg(B) to Seat(C) using Bolts(②) and Washers(⑤) with Allen
Key(①) as shown in the picture above.
Do not fully tighten Bolts.

Connect the Armrest(A&B) to Backrest(D) using Washers(⑤) and Bolts(④) with Allen
Key(①) as shown in the picture above.
Do not fully tighten the Bolts.

Place the Single Chair on a LEVEL SURFACE to check for wobbles.
Check for stability and then tighten all Bolts at all joints.
If it wobbles, lift the Single Chair some 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Single Chair freely and vertically with all four legs, hitting the ground, all at
the same time.
This Drop Test will help to ensure that all the Bolts and gaps reach full alignment
status.
Test again for evenness on a LEVEL SURFACE.
If no wobbles are found, slowly and steadily, place the Single Chair facedown.
Then, proceed to tighten all Bolts in a sequential manner.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on towards the next one.
This could cause the frame to warp. If there are still wobbles, loosen the Bolts and
execute the same drop test.
If the Single Chair is not stable, it could lead to damage to the product.

Place the Seat Cushion(E) on the Chair.
Your Single Chair is ready for use.
This Single Chair can only be used on a flat, level surface.
And place PE Caps(⑦) on Bolts as shown.

What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than
800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment
(OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list
include wood dust, brass, and other everyday substances, which can be found in very common household
items, such as: lamps, tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and
furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the
800-plus common chemicals and ingredients listed under this law could potentially be on our furniture or
packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’
ve shipped to our customers. Additionally, this warning label is very common and can be found on almost
every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank,
grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land Resort has a
Proposition 65 warning:
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Children should not climb or jump on the furniture.
Keep away from sources of ignition.