The M236MWF1 is a color active matrix thin film transistor (TFT) liquid crystal
display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of
a TFT LCD panel, a timing controler, voltage reference, common voltage, driver DC-DC
converter, column driver, and row driver circuit. This TFT LCD has a 23-inch diagonally
measured active display area with WXGA+ resolution (1920 vertical by 1080 horizontal
pixel array).
1.2 Features
23.6”WXGA+ TFT LCD Panel
4 CCFLs Backlight System
Supported WXGA+ (V:1920 lines, H:1080pixels) resolution
Supported to 75Hz Refresh Rate
Compatible with RoHS Standard
Compatible with ACC function
1.3 Product Summary
Items Specifications Unit
Screen Diagonal 23.6 Inch
Active Area 521.28 (H) x 293.22 (V) mm
Pixels H x V 1, 920(x3) x 1,080
Pixel Pitch 0.2715 (per one triad) x 0.2715 mm
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance 300 typical cd/ m2(CCFL@ 7.0mA)
Contrast Ratio 1,000 : 1 typical
Color Saturation 72% NTSC
Response Time 5 typical msec
Input Voltage + 5.0 typical V
Logic Power Consumption 4.5 typical (Black pattern, 60Hz) Watt
Backlight Power Consumption 26.32 typical (CCFL current 7.0mA) Watt
Weight 3,250typ g
Outline Dimension 544.8(W) x 320.5(H) x 18.38(T) typical mm
Electrical Interface (Logic) 8bit , dual LVDS
Support Color 16.7M
Luminance Uniformity 80% typical (@9 points)
Optimum Viewing Direction 6 o’colok
Surface Treatment AG/3H
Screw torque value 5max Kgf-cm
Note:Lamp Life Time is 50,000h(Ta=25+/-3degC and ICCFL=7.0mA, brightness becomes lower than
50% of initial value)
00
NO.1 Long Teng Road, KunShan City, JiangSu, China Tel:0512-57278888
InfoVision Optoelectronics (Kunshan) Co., LTD Fax:0512-57278900
Page 4 of 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
The optical characteristics are measured under stable conditions as following notes
Table 2 Optical Characteristics
Item Conditions
Viewing Angle [degrees]
K=Contrast Ratio>10
Contrast ratio Center 700 1000 -- A, C
Response Time [ms] Rising + Falling -- 5 8 A, D
Color Chromaticity
(CIE1931)
White Luminance [cd/m^2]ICCFL=7.0mA 250 300 -- Center A, E
Luminance Uniformity ICCFL=7.0mA, 9points 75% 80% -- A, F
Horizontal
Vertical
Red x 0.642
Red y 0.334
Green x 0.281 A,
Green y 0.600 A,
Blue x 0.144 A,
Blue y 0.071 A,
White x 0.313 A,
White y
Min Typ Max Note
150 170 --
140 160 --
-0.03
Specification
0.329
A, B
A,
A,
+0.03
A,
Note:
A. Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid
abrupt temperature change during measuring. In order to stabilize the luminance, the
measurement should be executed after lighting backlight for 20 minutes in a windless
room.
Figure 4 Measurement Setup
NO.1 Long Teng Road, KunShan City, JiangSu, China Tel:0512-57278888
InfoVision Optoelectronics (Kunshan) Co., LTD Fax:0512-57278900
Page 8 of 29
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!