IVIEW XD-4, XD-4X User Manual

XD-4 / XD-4X USER MANUAL V.2

1

XD-4/4X

4CH D1 H.264 DVR

REAL TIME RECORDING

D1 (720x480) @ 30FPS PER CHANNEL

User Manual

XD-4/ XD-4X 4CH D1 H264 DVR

XD-4X: NAVIGATION BUTTONS

XD-4: HOME DÉCOR SLIM DESIGN

Visit http://www.iviewtech.com

for firmware and application updates

This document contains preliminary information and subject to change without notice.

XD-4 / XD-4X USER MANUAL V.2

2

This symbol is intended to
alert the user to the presence

of unprotected “Dangerous

voltage" within the product's
enclosure that may be strong
enough to cause a risk of
electric shock.

This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.

NOTE: This equipment has been tested
and found to comply with the limits for a
class digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.

XD-4 / XD-4X USER MANUAL V.2

3

Table of Contents

CHAPTER 1 PACKING DETAIL AND INSTALLATION _____________________ 6

1-1 PACKING ___________________________________________________ 6
1-2 Hard Disk Installation ________________________________________ 7

CHAPTER 2 PANEL LOCATION ________________________________________ 9

2-1 XD-4X/XD-4 FRONT PANEL CONTROLS ________________________ 9
2-2 XD-4/XD-4X REAR PANEL CONNECTORS ______________________ 10

CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS _________________ 11

3-1 LIVE Mode ________________________________________________ 11
3-2 PLAYBACK Mode ___________________________________________ 14
3-3 PTZ Mode _________________________________________________ 16

CHAPTER 4 MAIN MENU SETUP ____________________________________ 17

4-1 RECORD SETUP ___________________________________________ 18

4-1.1 Quality & Frame Rate Setup ____________________________ 19

4-2 EVENT SETUP _____________________________________________ 19

4-2.1 MOTION SETUP _______________________________________ 20

4-2.1.1 MOTION AREA SETUP_____________________________ 20

4-3 SCHEDULE SETUP _________________________________________ 21

4-3.1 Schedule Record Setup ________________________________ 22

4-3.2 Holiday Setup _________________________________________ 22
4-4 CAMERA SETUP ___________________________________________ 23
4-5 ACCOUNT SETUP __________________________________________ 24

4-5.1 Permission Setup ______________________________________ 24

4-5.2 User Picture Setup ____________________________________ 25
4-6 NETWORKING SETUP _______________________________________ 25

4-6.1 NETWORKING SETUP __________________________________ 26

4-6.1.1 DHCP ___________________________________________ 26
4-6.1.2 LAN _____________________________________________ 26
4-6.1.3 ADSL ____________________________________________ 27

4-6.1.4 3G ______________________________________________ 27
4-6.2 HTTP Setup ___________________________________________ 28
4-6.3 DDNS Setup __________________________________________ 29
4-6.4 Mail Setup ____________________________________________ 30

4-7 PTZ & RS485 SETUP _______________________________________ 31
4-8 SYSTEM SETUP ____________________________________________ 32

4-8.1 DISPLAY SETUP _______________________________________ 32
4-8.2 DATE/TIME SETUP _____________________________________ 33

4-8.2.1 CHANGE DATE & TIME ____________________________ 34

4-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP ____ 34

4-8.2.3 INTERNET TIME SETUP ___________________________ 35
4-8.3 DEVICE SETUP ________________________________________ 35

4-9 UTILITY SETUP ____________________________________________ 37
4-10 DIAGNOSTIC ______________________________________________ 38

CHAPTER 5 BACKUP & SEARCH ____________________________________ 39

5-1 BACKUP SETUP ____________________________________________ 39
5-2 SEARCH SETUP ____________________________________________ 42

5-2.1 EVENT SEARCH _______________________________________ 42

5-2.1.1 CRITERIA SETUP FOR EVENT SEARCH _____________ 43
5-2.2 TIME SEARCH _________________________________________ 44

CHAPTER 6 Remote Software Installation and Setup ____________________ 44

XD-4 / XD-4X USER MANUAL V.2

4

6-1 AP Software Installation and instruction ______________________ 45
6-2 How to do remote monitoring through IE _____________________ 47
6-3 How to do remote monitoring through JPEG VIEWER(Only Monitor
Function) _____________________________________________________ 48
6-4 AP Software Operation ______________________________________ 50

CHAPTER 7 SPECIFICAITONS _______________________________________ 51
CHAPTER 8 MOBILE APPLICATION INSTALLATION AND USAGE __________ 53

8-1 Mobile Application Installation and Operation for Symbian ______ 53

8-1.1 Mobile Application Installation ___________________________ 53
8-1.2 Mobile Application Operation ____________________________ 54

8-1.2.1 Add New Login DVR ______________________________ 54

8-1.2.2 Logging Onto the DVR ____________________________ 54

8-1.2.3 Modify the Login Information of DVR _______________ 55

8-1.2.4 Delete the Login Information of DVR ________________ 55
8-1.3 Live Monitoring Operation ______________________________ 55

8-1.3.1 Scroll the Image __________________________________ 56

8-1.3.2 Image Quality Setup ______________________________ 56

8-1.3.3 Channel Display __________________________________ 56

8-1.3.4 Size of Image ____________________________________ 57

8-1.3.5 Rotate the image _________________________________ 57

8-1.3.6 Alarm ___________________________________________ 57

8-2 Mobile Application Installation and Operation for Windows Mobile 58

8-2.1 Mobile Application Installation ___________________________ 58
8-2.2 Mobile Application Operation ____________________________ 59
8-2.3 Operation under the LIVE monitoring. ____________________ 60

8-3 Google Android Phone OS application and operation ___________ 61
8-4 Blackberry Operation System Software Installation and Operation 64

8-4-1 Software installation ___________________________________ 64
8-4.2 Application Software Operation __________________________ 67

8-4.2.1 Add new log-in DVR ______________________________ 67

8-4.2.2 Log in onto the DVR ______________________________ 67

8-4.2.3 Modify the Login Information of DVR _______________ 68

8-4.2.4 Delete DVR Existing Record (Connection Information) _ 68
8-4.3 Live Image Operation __________________________________ 68

8-4.3.3 Image Rotation ___________________________________ 69

8-5 iPhone Software installation and operation ____________________ 70

8-5.1 iTune software installation and registration _______________ 70
8-5.2 “scdvr” software installation ( From iTunes ) _____________ 74
8-5.3 “scdvr” software installation ( From App Store ) _________ 76
8-5.4 How to operate “ScDvr” program. _______________________ 79

8-5.4.1 Add new DVR information. _________________________ 79

8-5.4.2 How to log in DVR. _______________________________ 80

8-5.4.3 How to change DVR’s information. _________________ 80
8-5.5 How to use ScDvr to Live monitor. ______________________ 81

8.5.5.1 Live display ______________________________________ 81

8.5.5.2 Rotate the display ________________________________ 81

CHAPTER 9 CMS INSTALLATION AND USAGE GUIDE ___________________ 82

9-1 CMS Installation ____________________________________________ 82
9-2 CMS LOGIN AND ENVIRONMENT _____________________________ 85
9-3 DVRs, Groups & Events _____________________________________ 86

9-3.1 View DVR／Group List _________________________________ 87
9-3.2 View Event Logs ______________________________________ 87

9-4 Local PC Information and Control ____________________________ 88
9-5 Main Display _______________________________________________ 88

XD-4 / XD-4X USER MANUAL V.2

5

9-5.1 Audio Control _________________________________________ 89
9-5.2 eMAP Display _________________________________________ 89
9-5.3 PTZ Control ___________________________________________ 91

9-6 Operation Bar ______________________________________________ 92

9-6.1 User administration ____________________________________ 93
9-6.2 DVR Administration ____________________________________ 94
9-6.3 Group Administration __________________________________ 94
9-6.4 eMap Administration ___________________________________ 96
9-6.5 Remote Play __________________________________________ 98
9-6.6 HDD Playback _________________________________________ 99
9-6.7 File Playback _________________________________________ 100
9-6.8 Event Playback _______________________________________ 101
9-6.9 Snapshot Data _______________________________________ 101
9-6.10 Recording Data ______________________________________ 102

APPENDIXⅠ I-DVR.NET REGISTRATION ______________________________ 103
APPENDIXⅡ ez-dns REGISTRATION _________________________________ 105
APPENDIXⅢ Remote Monitoring IE ActiveX Control Installation Instruction __ 108
APPENDIX 4 ANDROID APP SETUP 112

Visit http://www.iviewtech.com

for firmware and application updates

XD-4 / XD-4X USER MANUAL V.2

6

CHAPTER 1 PACKING DETAIL AND INSTALLATION

1-1 PACKING

XD-4X: 4ch DVR with Navigation Buttons

XD-4: 4ch DVR Home Décor Slim Design

1. DVR

2. Quick Start 3. IR Remote Control 4. SATA Cord 1pcs

5. CD 6.Screws x4 7. Power Adaptor

Note: Standard shipping products include neither HDD nor DVD R/W

XD-4 / XD-4X USER MANUAL V.2

7

1-2 Hard Disk Installation

Step１)：Take out the screws as pictures show。

Back panel 3 screws

Left 1 screw

Right 1 screw

Step 2 ) ：Open the cover follow the arrow direction。

XD-4 / XD-4X USER MANUAL V.2

8

Step３)：Connect SATA & Power wire to Hard Disk and put it on right position of
the bottom case。

Step４)：Fix the Hard Disk with four screws on the bottom case as the picture
indicated。

Step５)：Put the cover back and fix it with 5 screws as Step 1 indicated.

Note: After installation, please initialize Hard Disk before starting to record. For more detailed
information, please check out User Manual 4-9 System Tools for reference.

XD-4 / XD-4X USER MANUAL V.2

9

CHAPTER 2 PANEL LOCATION

2-1-1 XD-4X FRONT PANEL CONTROLS

⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪

① USB 2.0

Port for USB external devices.

② /

In SETUP mode, press to move cursor down. In PLAYBACK mode,
press to stop playing back.

/ SLOW

In SETUP mode, press to move cursor up. In PLAYBACK mode,
press to slow down.

/

In SETUP mode, press to increase value. In PLAYBACK mode
press to play forwards.

/

In SETUP mode, press to reduce value. In PLAYBACK mode,
press to play rewind.

③ IR Sensor

Input sensor for the remote control.

④ MENU

In LIVE mode, press to display menu. In PLAYBACK mode, press
to pause playback.

⑤ BACKUP/ESC

In LIVE mode, press to display the BACKUP menu. In SETUP
mode, press to return to previous page.

⑥ REC

Start or stop recording.

⑦ PLAY

Play back in normal speed.

⑧ T-SRH

Display the search menu.

⑨ ZOOM

In LIVE or PLAYBACK mode, enlarge the display of a channel.

⑩ PIP

In LIVE mode, display with picture in picture format.

⑪ MUTE

Enable / Disable Key Tone.

⑫ ENTER

In SETUP mode, press to enter values. In PLAYBACK mode,
switch between full, quad, 9-channel, 16-channel display in order.

⑬ LED Display
(From left to right)

Power: Power is on.
HDD: Hard disk is in use.
LAN: Connected to the internet (in red): Remote user logged in.
REC: Recording.
PLAY: Playing back.

⑭

In LIVE or PLAYBACK mode, switch to CH1。

⑮

In LIVE or PLAYBACK mode, switch to CH2。

⑯

In LIVE or PLAYBACK mode, switch to CH3。

⑰

In LIVE or PLAYBACK mode, switch to CH4。

⑱

In LIVE or PLAYBACK mode, switch to 4-channel display。

XD-4 / XD-4X USER MANUAL V.2

10

2-1-2 XD-4 FRONT PANEL CONTROLS

① ② ③ ④ ⑤ ⑥

① LED Power

DVR power on。

② LED LAN

LAN is working。

③ LED PLAY

DVR playback

④ LED REC

Recording

⑤ IR Sensor

Remote control signal receiver

⑥ USB port

USB 2.0 port ( For backup USB pen drives )
please use back panel USB port for USB mouse )。

2-2 XD-4 / XD-4X REAR PANEL CONNECTORS

③ ④

① ② ⑤ ⑥ ⑦ ⑧ ⑨

① DC 12V

DC 12V power jack

② VIDEO OUT

MAIN/SPOT monitor BNC Video output

③ VIDEO IN

For cameras BNC input ，4 ports

④ AUDIO IN

RCA input( For CH1)

⑤ AUDIO OUT

RCA output ( For CH1)

⑥ VGA

VGA port

⑦ USB

USB 1.0 port for USB mouse

⑧ RS-485

RS-485 for PTZ

⑨ LAN

Network port

XD-4 / XD-4X USER MANUAL V.2

11

CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS

REMOTE CONTROL ID# 0

The IR remote control and mouse operate differently under each mode; this chapter describes
the functions of them under three different modes: LIVE, PLAYBACK and PTZ.

3-1 LIVE Mode

You can monitor all the channels, listen to audio signal and have some related operations under
LIVE mode. This paragraph describes the IR remote control, mouse operation and on screen
graphical icons under LIVE mode.

Table 3-1.1 Functions of remote control under LIVE mode

DEFAULT LOGIN NAME: ADMIN
DEFAULT PASSWORD: 123456

Button

Description

REC

Start/Stop recording.

PLAY

Start playing back the most recently recorded segment.

ENTER/MODE

Switch to full screen, quad display.

MENU/

Enable/ Disable setup Menu.

BK-UP

Enable/ Disable backup menu.

ESC

Return last menu.

XD-4 / XD-4X USER MANUAL V.2

12

Table 3-1.2 Graphical icons that will display after right-clicking your mouse under LIVE mode.

Icon

Description

Resting the cursor on this icon will bring up the following four menu icons.

Main menu.

Search menu.

Backup menu.

PTZ mode.

Turn on/off recording.

Playback.

Resting the cursor on this icon will bring up the following five display icons.

FREEZE.

ZOOM, double the screen size

AUTO-sequence

LOCK, activate the key lock.

Full screen display.

Quad display.

9 display

XD-4 / XD-4X USER MANUAL V.2

13

Table 3-1.3 Description of on screen graphical icons in LIVE mode

Icon

Description

Recording is on

Schedule Recording is on

Live Audio is on

Live Audio is off

Motion detected on the channel

Video loss detected on the channel

USB device detected

Connected to the LAN cable.

AUTO-seq is on

Freeze is on, screen is frozen

LOCK is on

PTZ control is on

Shows the current hard disk space has been used
(99% mean used 99%, remain 1%)

Lower right of each CH will show the current time

On-Screen Command Bar ( via Remote Login )

Icon

Description

/

Image quality (High/Low)

/

Full screen
Record

Record and snap shot file saving path setup

Enable / Disable Shortcut Toolbar

XD-4 / XD-4X USER MANUAL V.2

14

3-2 PLAYBACK Mode

Switch to PLAYBACK mode by pressing “PLAY” under the LIVE mode, the graphical icon

will show up on the upper center of the screen and the operation panel ( see below picture) will
show up at right lower corner of the screen. You can drag the panel by mouse to place it on
any location of your screen.

Table 3-2.1 Remote control functions under the PLAYBACK mode

Button

Description

ENTER / MODE

Switch to full screen, quad

MENU /

Turn on/off PAUSE.

PLAY

Play back at normal speed.

/ SLOW

Play back at slower speed. The speed will be slowed to 1/2, 1/4, 1/8,
by each pressing of the button till the slowest limitation of the normal
speed.

/

Fast rewind. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.

/

Fast forward. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.

/

Stop playback.

XD-4 / XD-4X USER MANUAL V.2

15

Table 3-2.2 The mouse operation under the PLAYBACK mode.

Icon

Description

「 / 」 Fast rewind

「 / 」Fast forward

／

Play/pause

「▲ / SLOW」， slow playback

「▼ / ■」stop playback

Playback channel by channel with snap shot display

Full screen display

Quad display

9 screen display

Zoom-in display

If you want to monitor single channel, please choose a channel and click left butt
on of mouse two times.

XD-4 / XD-4X USER MANUAL V.2

16

3-3 PTZ Mode

Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ icon
will appear on upper left side of screen and the control panel will appear on the down right side
of screen.

Table 3-3.2 Mouse operation under the PTZ mode

Icon

Description

Leave PTZ Mode，back to the LIVE mode

Pre-set number N. (0~255)

Go to pre-set number N.

Set current PTZ location at pre-set number N.

「TOUR」， press to activate pre-set tour＊

「PIP」， Set current PTZ location as the start of line-scan. ＊

「FREEZE」， Activate line-scan. ＊

「ZOOM」， Set current PTZ location as the end of line-scan. ＊

To move PTZ in 360°
PTZ zoom in; PTZ zoom out

PTZ focus in; PTZ focus out.

PTZ IRIS open, PTZ IRIS close.

Below functions need support from specific PTZ manufacturer.
Please check user manual of your PTZ for more detail.

to

AUX 1~8,「AUTO」Key ＋ Number key「1~8」

「Backup」, Customized function。

＊ PTZ communication protocols from different brands aren’t compatible 100%

sometimes. Therefore, some of these functions may be unavailable.

XD-4 / XD-4X USER MANUAL V.2

17

CHAPTER 4 MAIN MENU SETUP

To enter the main menu and set up DVR, log-in account and user password are required.
The default password of the administrator is “123456”. Please check the “Account Setup” for
related setup of other log-in users.

Table 4-0.1 Some definition of virtual keyboard.

Item

Description

Switch between capital and small letters.

/

Switch between numbers and letters.

Press to cancel the setup, and re-choose the login

account.

Delete the last character.

Enter to identify the password. It will enter the set
up menu, If the password is verified.

Space key

XD-4 / XD-4X USER MANUAL V.2

18

Table 4-0.2 The operation of remote control under the setting menu

Item

Description

Switch to different options under one item

Switch to different items

MENU

Save setup and back to LIVE mode

ESC

Back to Upper level of menu without saving

ENTER

Enter the menu, or display virtual keyboard

PS. The initialization of new-installed HD is required before recording, please refer to “4-9
UTILITY SETUP” for detail.

4-1 RECORD SETUP

Item

Description

HDD FULL

Select STOP to stop recording or OVERWRITE to reuse the
HDD when HDD is full

「

Stop

」：

Stop Recording

「

Overwrite

」：

Start to overwrite that begin from the oldest data

of HDD, and continue to record.

OSD position X

Setup OSD X axis

OSD position Y

Set up OSD y axis

OSD position setup

Set up OSD axis

Video Preservation

Setup the video preservation period. Recorded video will be
deleted automatically after expiry of preservation period.

Quality & Frame Rate
Setup

Setup the quality and frame rate for each channel under normal
recording and event recording type.

XD-4 / XD-4X USER MANUAL V.2

19

4-1.1 Quality & Frame Rate Setup

Item

Description

Normal setup/
event setup

Select recording mode

Resolution

Select recording resolution: NTSC:352x240, 704x240, 704x480
PAL:352X288,704X288,704X576

Record Type

You can setup quality and FPS separately for record type.

No.

Check/uncheck the box enable/disable selected channel recording

Quality

Select quality: Below Basic/ Basic/ Normal/ High/ Highest

FPS

Select recording frame rate.

Auto

Assign each channel with its maximum accessible fps

4-2 EVENT SETUP

Item

Description

Motion Setup

Enter to set up motion detection

XD-4 / XD-4X USER MANUAL V.2

20

4-2.1 MOTION SETUP

Item

Description

Alarm Duration(Seconds)

When motion detect，the number of seconds continuous alarm

1~4

You can setup independently for each channel.

Enable

Check the box to Enable/Disable motion detection for each channel.

Sensitivity

Drag the white bar or press ◀ ▶ to set up Sensitivity from valu
e 1 to 10 for each channel. The lower value you set the highe
r sensitivity it will be

Motion Area Setup

Enter to setup motion detection area

4-2.1.1 MOTION AREA SETUP

The motion detection has been divided into 16x12 grids. The default detection area is
full screen as it marked in transparent for local DVR and purple for remote access.
Areas deselected for motion detection are marked in red for both local and remote site.

XD-4 / XD-4X USER MANUAL V.2

21

Item

Description

Mask Mouse Selection

Switch between “select” and “deselect” for cursor-dragging function

All Area Detection

Select entire screen as detection area.

Mask All Area

Deselect entire detection area.

Continue

Continue setup

Exit & Save

Save setup and leave

Exit & Discard

Cancel setup and leave

4-3 SCHEDULE SETUP

Except from starting recording manually, you can also setup the recording time by week
s and schedule including normal, motion detect, and recording type.

Item

Description

Page

Each page provides 10 schedules for setup. 5 pages in total.

Holiday Setup

Enter to setup holiday, up to 50 days, other than weekends,.

View Event/ Motion/
Sensor Setup

View Normal/ Motion

XD-4 / XD-4X USER MANUAL V.2

22

4-3.1 Schedule Record Setup

Click on the time on the left side. The setup menu will be displayed. You can have
detail setup by dates, Time and event.

4-3.2 Holiday Setup

Since holidays are different by different country and region, you can setup the holiday of
your location accordingly.

XD-4 / XD-4X USER MANUAL V.2

23

4-4 CAMERA SETUP

Item

Description

1~4

You can setup independently for each channel.

Mask

Check the box to Enable/Disable mask function for LIVE mode

Sharpness

Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from

value 0 to 15. The default value is 1.

Brightness

Drag the bar or press ◀ ▶ to adjust Brightness of your camera from

value 1 to 255. The default value is 128.

Contrast

Drag the bar or press ◀ ▶ to adjust Contrast of your camera from
value 1 to 255. The default value is 100.

Chroma(U)/(V)

Drag the bar or press ◀ ▶ to adjust Chroma of your camera from
value 1 to 255. The default value is 128.

Hue

Drag the bar or press ◀ ▶ to adjust Hue of your camera from value 1
to 255. The default value is 128. ( This function doesn’t support at

PAL system)

Name

Set up name of each channel

Volume

Audio volume for CH1 under LIVE mode and recording mode can be
adjusted.( 4CH model only 1 CH can be adjusted )

XD-4 / XD-4X USER MANUAL V.2

24

4-5 ACCOUNT SETUP

The Account Setup menu is used to provide role-based permission independently setting for
each user (maximum of 4 users) to access DVR over network. The default admin account and
password is “admin” and “123456”

(The default password remains the same after firmware upgrade)

Item

Description

No.

Check to activate the user‟s account.

Username

Set up username

Password

Set up password for each user. Password is 8-digits required and can
be mixed by letters and numbers with case-sensitive. Letters can be
mixed with capitals or lowercases.

Permissions

Set up Permissions for each user

Change Admin
Password

Change administrator‟s password

Picture

Change user‟s picture

4-5.1 Permission Setup

The Account Setup is set to provide individual user (maximum of 4 users) role-based
permissions, including access to Setup menu, Network operation, PTZ function, Playback,
Utility, Backup, Password expiry date and Mask on specific channels while playing back.

XD-4 / XD-4X USER MANUAL V.2

25

4-5.2 User Picture Setup

User can select picture wished to be changed to from hard drive.

4-6 NETWORKING SETUP

Item

Description

Connect type

Setup mode for network connection: (ADSL、DHCP、LAN、3G).

HTTP Setup

Enter to set up HTTP

DDNS Setup

Enter to set up DDNS

Mail Setup

Enter to set up mail

3G Setup

Enter to set up 3G network

XD-4 / XD-4X USER MANUAL V.2

26

4-6.1 NETWORKING SETUP

There are three ways to connect to the network as followed.

4-6.1.1 DHCP

When DHCP is selected, IP address will be assigned by DHCP server automatically.

4-6.1.2 LAN

Select LAN for network connection, the following information is required.

Item

Description

IP Address

Enter IP address provided by ISP

Subnet Mask

Enter IP address of Subnet Mask provided by ISP

Gateway

Enter IP address of Gate way provided by ISP

DNS

Enter DNS address provided by ISP.

(Note: The correct DNS address must be entered for DDNS function).

XD-4 / XD-4X USER MANUAL V.2

27

4-6.1.3 ADSL

Select ADSL for network connection, the following information is required.

Item

Description

User Name

Enter user name provided by ISP

Password

Enter password provided by ISP

4-6.1.4 3G

Select 3G for network connection, the following information is required.

Item

Description

Dial-up Number

Dial-up Number，Determined as the ISP

PIN

Enter SIM card password

APN

Enter ”internet”

Advance Setting

The advanced settings (Taiwan ISP outside)

XD-4 / XD-4X USER MANUAL V.2

28

Item

Description

Enable

Enable advance setting

User Name

Enter ISP username

Password

Enter ISP password

IP Address

Enter the ISP provides a fixed IP address。
(if the client uses the Internet only need to enter a fixed IP)

PS：This feature currently only supports the Huawei 3G card

4-6.2 HTTP Setup

Item

Description

Enable HTTP
Server

Check to enable HTTP server. Users can remotely access into the
DVR over the network if the HTTP function is activated.

Port

Enter a valid port value from 1 up to 65000. The default value is 80.

Auto

Assign each channel with its maxima accessible fps

No.

Chanel number

Quality

Set up record quality. There are below basic, basic, normal, high,
highest

FPS

Set up record FPS

XD-4 / XD-4X USER MANUAL V.2

29

4-6.3 DDNS Setup

Item

Description

Enable DDNS

Enable/disable DDNS function.

DDNS Server

Enter the registered SMTP Server:

ez-dns＊、I-DVR.NET＊ 、DYNDNS.ORG、NO-IP.ORG、3322.ORG

Host Name

Enter the completed registered SMTP Server.

(Including username + Server)

If the user name is h.264 and you choose i-dvr as your server,
you should enter: h.264.i-dvr.net

User Name

Enter user name.

Password

Enter password.

＊For more detailed I-DVR.NET operation instruction, please refer to appendixⅠ、Ⅱ

XD-4 / XD-4X USER MANUAL V.2

30

4-6.4 Mail Setup

When event occurs (VLOSS, MOTION), email will be sent to the receiver account automatically.

Item

Description

Enable E-mail Notification

Check the box to enable/disable E-mal Notification function.

SMTP Server

Enter to set up SMTP Server name.
(Varies according to the user)

User Name

Enter to set up User Name.

Password

Enter to set up Password.

Sender E-mail

Enter to set up e-mail address of receivers.

Trigger Event

Enter to select events to send out E-mail notifications when below
circumstances happen: Motion, Sensor and Vloss (Video Loss).

Receiver E-mail

Enter to set up e-mail addresses for up to 10 receivers individually.