IVIEW HD-16 PRO User Manual
HD-16 PRO USER MANUAL Revision D
1
HD-16 PRO HDMI
16CH H.264 DVR
REAL TIME RECORDING
CIF (360x240) @ 30 FPS PER CHANNEL
User Manual
HD-16 PRO H264 DVR
Visit http://www.iviewtech.com
For firmware and application updates
This document contains preliminary information and subject to change without notice.
HD-16 PRO USER MANUAL Revision D
2
This symbol is intended to
alert the user to the presence
of unprotected “Dangerous
voltage" within the product's
enclosure that may be strong
enough to cause a risk of
electric shock.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
NOTE: This equipment has been tested
and found to comply with the limits for a
class digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
3
Table of Contents
CHAPTER 1 PACKING DETAIL AND INSTALLATION _____________________ 6
1-1 PACKING ___________________________________________________ 6
1-2 Hard Disk Installation ________________________________________ 7
1-3 DVD-RW Installation _________________________________________ 8
CHAPTER 2 PANEL LOCATION _______________________________________ 10
2-1 FRONT PANEL CONTROLS __________________________________ 10
2-2 16CH REAR PANEL CONNECTORS ___________________________ 11
CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS _________________ 12
3-1 LIVE Mode ________________________________________________ 12
3-2 PLAYBACK Mode ___________________________________________ 15
3-3 PTZ Mode _________________________________________________ 17
CHAPTER 4 MAIN MENU SETUP ____________________________________ 18
4-1 RECORD SETUP ___________________________________________ 20
4-1.1 Quality & Frame Rate Setup ____________________________ 21
4-2 EVENT SETUP _____________________________________________ 21
4-2.1 MOTION SETUP _______________________________________ 22
4-2.1.1 MOTION AREA SETUP_____________________________ 22
4-3 SCHEDULE SETUP _________________________________________ 23
4-3.1 Schedule Record Setup ________________________________ 24
4-3.2 Holiday Setup _________________________________________ 24
4-4 CAMERA SETUP ___________________________________________ 25
4-5 ACCOUNT SETUP __________________________________________ 26
4-5.1 Permission Setup ______________________________________ 26
4-5.2 User Picture Setup ____________________________________ 27
4-6 NETWORKING SETUP _______________________________________ 27
4-6.1 NETWORKING SETUP __________________________________ 28
4-6.1.1 DHCP ___________________________________________ 28
4-6.1.2 LAN _____________________________________________ 28
4-6.1.3 ADSL ____________________________________________ 29
4-6.1.4 3G ______________________________________________ 29
4-6.2 HTTP Setup ___________________________________________ 30
4-6.3 DDNS Setup __________________________________________ 31
4-6.4 Mail Setup ____________________________________________ 32
4-7 PTZ & RS485 SETUP _______________________________________ 33
4-8 SYSTEM SETUP ____________________________________________ 34
4-8.1 DISPLAY SETUP _______________________________________ 34
4-8.2 DATE/TIME SETUP _____________________________________ 35
4-8.2.1 CHANGE DATE & TIME ____________________________ 36
4-8.2.2 TIME ZONE AND DAYLIGHT SAVING TIME SETUP ____ 36
4-8.2.3 INTERNET TIME SETUP ___________________________ 37
4-8.3 DEVICE SETUP ________________________________________ 37
4-9 UTILITY SETUP ____________________________________________ 39
4-10 DIAGNOSTIC ______________________________________________ 40
CHAPTER 5 BACKUP & SEARCH ____________________________________ 41
5-1 BACKUP SETUP ____________________________________________ 41
5-2 SEARCH SETUP ____________________________________________ 44
5-2.1 EVENT SEARCH _______________________________________ 44
5-2.1.1 CRITERIA SETUP FOR EVENT SEARCH _____________ 45
5-2.2 TIME SEARCH _________________________________________ 46
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
4
CHAPTER 6 Remote Software Installation and Setup ____________________ 46
6-1 AP Software Installation and instruction ______________________ 47
6-2 How to do remote monitoring through IE _____________________ 49
6-3 How to do remote monitoring through JPEG VIEWER(Only Monitor
Function) _____________________________________________________ 50
6-4 AP Software Operation ______________________________________ 52
CHAPTER 7 SPECIFICAITONS _______________________________________ 53
CHAPTER 8 MOBILE APPLICATION INSTALLATION AND USAGE __________ 55
8-1 Mobile Application Installation and Operation for Symbian ______ 55
8-1.1 Mobile Application Installation ___________________________ 55
8-1.2 Mobile Application Operation ____________________________ 56
8-1.2.1 Add New Login DVR ______________________________ 56
8-1.2.2 Logging Onto the DVR ____________________________ 56
8-1.2.3 Modify the Login Information of DVR _______________ 57
8-1.2.4 Delete the Login Information of DVR ________________ 57
8-1.3 Live Monitoring Operation ______________________________ 57
8-1.3.1 Scroll the Image __________________________________ 58
8-1.3.2 Image Quality Setup ______________________________ 58
8-1.3.3 Channel Display __________________________________ 58
8-1.3.4 Size of Image ____________________________________ 59
8-1.3.5 Rotate the image _________________________________ 59
8-1.3.6 Alarm ___________________________________________ 59
8-2 Mobile Application Installation and Operation for Windows Mobile 60
8-2.1 Mobile Application Installation ___________________________ 60
8-2.2 Mobile Application Operation ____________________________ 61
8-2.3 Operation under the LIVE monitoring. ____________________ 62
8-3 Google Android Phone OS application and operation ___________ 63
8-4 Blackberry Operation System Software Installation and Operation 66
8-4-1 Software installation ___________________________________ 66
8-4.2 Application Software Operation __________________________ 69
8-4.2.1 Add new log-in DVR ______________________________ 69
8-4.2.2 Log in onto the DVR ____________________________ 69
8-4.2.3 Modify the Login Information of DVR _____________ 70
8-4.2.4 Delete DVR Existing Record (Connection Information) 7
0
8-4.3 Live Image Operation __________________________________ 70
8-4.3.3 Image Rotation ___________________________________ 71
CHAPTER 9 CMS INSTALLATION AND USAGE GUIDE ___________________ 72
9-1 CMS Installation ____________________________________________ 72
9-2 CMS LOGIN AND ENVIRONMENT _____________________________ 74
9-3 DVRs, Groups & Events _____________________________________ 76
9-3.1 View DVR／Group List _________________________________ 76
9-3.2 View Event Logs ______________________________________ 77
9-4 Local PC Information and Control ____________________________ 77
9-5 Main Display _______________________________________________ 78
9-5.1 Audio Control _________________________________________ 78
9-5.2 eMAP Display _________________________________________ 79
9-5.3 PTZ Control ___________________________________________ 80
9-6 Operation Bar ______________________________________________ 81
9-6.1 User administration ____________________________________ 82
9-6.2 DVR Administration ____________________________________ 83
9-6.3 Group Administration __________________________________ 83
9-6.4 eMap Administration ___________________________________ 85
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
5
9-6.5 Remote Play __________________________________________ 87
9-6.6 HDD Playback _________________________________________ 88
9-6.7 File Playback __________________________________________ 89
9-6.8 Event Playback ________________________________________ 90
9-6.9 Snapshot Data ________________________________________ 90
9-6.10 Recording Data _______________________________________ 91
APPENDIXⅠ I-DVR.NET REGISTRATION _______________________________ 92
APPENDIXⅡ ez-dns REGISTRATION __________________________________ 94
APPENDIXⅢ Remote Monitoring IE ActiveX Control Installation Instruction ___ 97
APPENDIX 4: Android APP Installation & Operation 101
Last Revised May, 2011
APPENDIX 5:Apple APP Installation & Operation 112
Last Revised May, 2011
Visit http://www.iviewtech.com
for firmware and application updates
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
6
CHAPTER 1 PACKING DETAIL AND INSTALLATION
1-1 PACKING
HD-16 PRO: 16ch DVR with HDMI
1. DVR
2. Quick Start 3. IR Remote Control 4.Batteries x2
5. CD 6. Hard Disk Mount x 4 7. Screws x 20
8. Power Adaptor 9. Power Cord 10. SATA Cord 2pcs for 16ch
Note: Standard shipping products include neither HDD nor DVD R/W
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
7
1-2 Hard Disk Installation
Step 1) Fix the HDD to rack mount with the screws as indicated.
Step 2) Place the HDD on the HDD plate and screw it as indicated.
Step 3) Connect the power and the SATA cables as indicated.
Note: After installation, please initialize Hard Disk before starting to record. For more detailed
information, please check out User Manual 4-9 System Tools for reference.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
8
1-3 DVD-RW Installation
Step 1) Remove the front cover from DVR.
Step 2) Put the DVD-RW into the DVR as indicated by the arrow.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
9
Step 3) Screw the bottom of the DVR as indicated to fix the DVD-RW.
Step 4) Connect the power and the SATA cables.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
10
CHAPTER 2 PANEL LOCATION
2-1 16CH FRONT PANEL CONTROLS
Control Keys
Description
① DVD Writer
Optional DVD-RW (CD-RW) backup device. (Optional)
② USB 2.0 Port
Port for USB external devices.
③ LED Display
(From left to right)
Power: Power is on. HDD: Hard disk is in use.
LAN: Connected to the internet (in red): Remote user logged in.
REC: Recording. (or Schedule Recording and recording are on)
PLAY: Playing back.
④ /
In SETUP mode, press to move cursor down. In PLAYBACK mode, press
to stop playing back.
/ SLOW
In SETUP mode, press to move cursor up. In PLAYBACK mode, press to
slow down.
/
In SETUP mode, press to increase value. In PLAYBACK mode press to
play forwards.
/
In SETUP mode, press to reduce value. In PLAYBACK mode, press to
play rewind.
⑤ BACKUP/ESC
In LIVE mode, press to display the BACKUP menu. In SETUP mode,
press to return to previous page.
⑥ PIP
In LIVE mode, display with picture in picture format.
⑦ ZOOM
In LIVE or PLAYBACK mode, enlarge the display of a channel.
⑧ FREEZE
Turn on/off screen freeze function.
⑨ T-SRH
Display the search menu.
⑩ IR Sensor
Input sensor for the remote control.
⑪ ENTER/MODE
In SETUP mode, press to enter values. In PLAYBACK mode, switch
between full, quad, 9-channel, 16-channel display in order.
⑫ MENU/
In LIVE mode, press to display menu. In PLAYBACK mode, press to pause
playback.
⑬ MUTE
Turn on/off KEY tone function.
⑭ REC
Start or stop recording.
⑮ PLAY
Play back in normal speed.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
11
2-2 16CH REAR PANEL CONNECTORS
○
1
MAIN monitor
BNC port for the main monitor.
○
2
SPOT monitor
BNC port to display full screen image of all installed cameras
in sequence.
○
3
VIDEO IN
BNC input ports for cameras, 16 in total.
○
4
AUDIO IN
RCA input port for audio signal. There are 4 ports available.
(corresponding to channel 1 to 4)
○
5
VGA
VGA port.
○
6
Fan
DC 12V 40mm X 40mm fan.
○
7
DC 12V
Socket for a DC 12V input.
○
8
POWER
Power switch.
○
9
EXTERNAL I/O
EXTERNAL I/O port for PTZ and Alarm/Relay Operation
○
10
NTSC／PAL Switch
Switch between NTSC and PAL format.
○
11
LAN
RJ45 Network Port
○
12
USB
USB 1.0 for Mouse
⑬ AUDIO OUT
RCA output for audio signal.
Note: After installation, please initialize Hard Disk before starting to record. For more detailed
information, please check out User Manual 4-9 System Tools for reference.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
12
CHAPTER 3 LIVE, PLAYBACK AND PTZ OPERATIONS
REMOTE CONTROL ID# 1
The IR remote control and mouse operate differently under each mode; this chapter describes
the functions of them under three different modes: LIVE, PLAYBACK and PTZ.
3-1 LIVE Mode
You can monitor all the channels, listen to audio signal and have some related operations under
LIVE mode. This paragraph describes the IR remote control, mouse operation and on screen
graphical icons under LIVE mode.
Table 3-1.1 Functions of remote control under LIVE mode
DEFAULT LOGIN NAME: ADMIN
DEFAULT PASSWORD: 123456
Button
Description
REC
Start/Stop recording.
PLAY
Start playing back the most recently recorded segment.
ENTER/MODE
Switch to full screen, quad display.
MENU/
Enable/ Disable setup Menu.
BK-UP
Enable/ Disable backup menu.
ESC
Return last menu.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
13
Table 3-1.2 Graphical icons that will display after right-clicking your mouse under LIVE mode.
Icon
Description
Resting the cursor on this icon will bring up the following four menu icons.
Main menu.
Search menu.
Backup menu.
PTZ mode.
Turn on/off recording.
Playback.
Resting the cursor on this icon will bring up the following five display icons.
FREEZE.
ZOOM, double the screen size
AUTO-sequence
LOCK, activate the key lock.
Full screen display.
Quad display.
9 display
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
14
Table 3-1.3 Description of on screen graphical icons in LIVE mode
Icon
Description
Recording is on
Schedule Recording is on
Live Audio is on
Live Audio is off
Motion detected on the channel
Video loss detected on the channel
USB device detected
Connected to the LAN cable.
AUTO-seq is on
Freeze is on, screen is frozen
LOCK is on
PTZ control is on
Shows the current hard disk space has been used
(99% mean used 99%, remain 1%)
Lower right of each CH will show the current time
On-Screen Command Bar ( via Remote Login )
Icon
Description
/
Image quality (High/Low)
/
Full screen
Record
Record and snap shot file saving path setup
Enable / Disable Shortcut Toolbar
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
15
3-2 PLAYBACK Mode
Switch to PLAYBACK mode by pressing “PLAY” under the LIVE mode, the graphical icon
will show up on the upper center of the screen and the operation panel ( see below picture) will
show up at right lower corner of the screen. You can drag the panel by mouse to place it on
any location of your screen.
Table 3-2.1 Remote control functions under the PLAYBACK mode
Button
Description
ENTER / MODE
Switch to full screen, quad
MENU /
Turn on/off PAUSE.
PLAY
Play back at normal speed.
/ SLOW
Play back at slower speed. The speed will be slowed to 1/2, 1/4, 1/8,
by each pressing of the button till the slowest limitation of the normal
speed.
/
Fast rewind. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Fast forward. Each press increases the speed to the next level. There
are six speeds: 2x, 4X, 8X, 16x, 32X and 64X.
/
Stop playback.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
16
Table 3-2.2 The mouse operation under the PLAYBACK mode.
Icon
Description
「 / 」 Fast rewind
「 / 」Fast forward
／
Play/pause
「▲ / SLOW」， slow playback
「▼ / ■」stop playback
Playback channel by channel with snap shot display
Full screen display
Quad display
9 screen display
Zoom-in display
If you want to monitor single channel, please choose a channel and click left butt
on of mouse two times.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
17
3-3 PTZ Mode
Switch to the PTZ mode by pressing “PTZ” button under the LIVE mode. The PTZ icon
will appear on upper left side of screen and the control panel will appear on the down right side
of screen.
Table 3-3.2 Mouse operation under the PTZ mode
Icon
Description
Leave PTZ Mode，back to the LIVE mode
Pre-set number N. (0~255)
Go to pre-set number N.
Set current PTZ location at pre-set number N.
「TOUR」， press to activate pre-set tour＊
「PIP」， Set current PTZ location as the start of line-scan. ＊
「FREEZE」， Activate line-scan. ＊
「ZOOM」， Set current PTZ location as the end of line-scan. ＊
To move PTZ in 360°
PTZ zoom in; PTZ zoom out
PTZ focus in; PTZ focus out.
PTZ IRIS open, PTZ IRIS close.
Below functions need support from specific PTZ manufacturer. Please check user manual of your PTZ for
more detail.
to
AUX 1~8,「AUTO」Key ＋ Number key「1~8」
「Backup」, Customized function。
＊ PTZ communication protocols from different brands aren’t compatible 100%
sometimes. Therefore, some of these functions may be unavailable.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
18
CHAPTER 4 MAIN MENU SETUP
To enter the main menu and set up DVR, log-in account and user password are required.
The default password of the administrator is “123456”. Please check the “Account Setup” for
related setup of other log-in users.
Table 4-0.1 Some definition of virtual keyboard.
Item
Description
Switch between capital and small letters.
/
Switch between numbers and letters.
Press to cancel the setup, and re-choose the login
account.
Delete the last character.
Enter to identify the password. It will enter the set
up menu, If the password is verified.
Space key
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
19
Table 4-0.2 The operation of remote control under the setting menu
Item
Description
Switch to different options under one item
Switch to different items
MENU
Save setup and back to LIVE mode
ESC
Back to Upper level of menu without saving
ENTER
Enter the menu, or display virtual keyboard
PS. The initialization of new-installed HD is required before recording, please refer to “4-9
UTILITY SETUP” for detail.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
20
4-1 RECORD SETUP
Item
Description
HDD FULL
Select STOP to stop recording or OVERWRITE to reuse the
HDD when HDD is full
「
Stop
」：
Stop Recording
「
Overwrite
」：
Start to overwrite that begin from the oldest data
of HDD, and continue to record.
OSD position X
Setup OSD X axis
OSD position Y
Set up OSD y axis
OSD position setup
Set up OSD axis
Video Preservation
Setup the video preservation period. Recorded video will be
deleted automatically after expiry of preservation period.
Quality & Frame Rate
Setup
Setup the quality and frame rate for each channel under normal
recording and event recording type.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
21
4-1.1 Quality & Frame Rate Setup
Item
Description
Normal setup/
event setup
Select recording mode
Resolution
Select recording resolution: NTSC:352x240, 704x240, 704x480
PAL:352X288,704X288,704X576
Record Type
You can setup quality and FPS separately for record type.
No.
Check/uncheck the box enable/disable selected channel recording
Quality
Select quality: Below Basic/ Basic/ Normal/ High/ Highest
FPS
Select recording frame rate.
Auto
Assign each channel with its maximum accessible fps
4-2 EVENT SETUP
Item
Description
Motion Setup
Enter to set up motion detection
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
22
4-2.1 MOTION SETUP
Item
Description
Alarm Duration(Seconds)
When motion detect，the number of seconds continuous alarm
1~4
You can setup independently for each channel.
Enable
Check the box to Enable/Disable motion detection for each channel.
Sensitivity
Drag the white bar or press ◀ ▶ to set up Sensitivity from valu
e 1 to 10 for each channel. The lower value you set the highe
r sensitivity it will be
Motion Area Setup
Enter to setup motion detection area
4-2.1.1 MOTION AREA SETUP
The motion detection has been divided into 16x12 grids. The default detection area is
full screen as it marked in transparent for local DVR and purple for remote access.
Areas deselected for motion detection are marked in red for both local and remote site.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
23
Item
Description
Mask Mouse Selection
Switch between “select” and “deselect” for cursor-dragging function
All Area Detection
Select entire screen as detection area.
Mask All Area
Deselect entire detection area.
Continue
Continue setup
Exit & Save
Save setup and leave
Exit & Discard
Cancel setup and leave
4-3 SCHEDULE SETUP
Except from starting recording manually, you can also setup the recording time by week
s and schedule including normal, motion detect, and recording type.
Item
Description
Page
Each page provides 10 schedules for setup. 5 pages in total.
Holiday Setup
Enter to setup holiday, up to 50 days, other than weekends,.
View Event/ Motion/
Sensor Setup
View Normal/ Motion
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
24
4-3.1 Schedule Record Setup
Click on the time on the left side. The setup menu will be displayed. You can have
detail setup by dates, Time and event.
4-3.2 Holiday Setup
Since holidays are different by different country and region, you can setup the holiday of
your location accordingly.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
25
4-4 CAMERA SETUP
Item
Description
1~4
You can setup independently for each channel.
Mask
Check the box to Enable/Disable mask function for LIVE mode
Sharpness
Drag the bar or press ◀ ▶ to adjust Sharpness of your camera from
value 0 to 15. The default value is 1.
Brightness
Drag the bar or press ◀ ▶ to adjust Brightness of your camera from
value 1 to 255. The default value is 128.
Contrast
Drag the bar or press ◀ ▶ to adjust Contrast of your camera from
value 1 to 255. The default value is 100.
Chroma(U)/(V)
Drag the bar or press ◀ ▶ to adjust Chroma of your camera from
value 1 to 255. The default value is 128.
Hue
Drag the bar or press ◀ ▶ to adjust Hue of your camera from value 1
to 255. The default value is 128. ( This function doesn’t support at
PAL system)
Name
Set up name of each channel
Volume
Audio volume for CH1 under LIVE mode and recording mode can be
adjusted.( 4CH model only 1 CH can be adjusted )
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
26
4-5 ACCOUNT SETUP
The Account Setup menu is used to provide role-based permission independently setting for
each user (maximum of 4 users) to access DVR over network. The default admin account and
password is “admin” and “123456”
(The default password remains the same after firmware upgrade)
Item
Description
No.
Check to activate the user‟s account.
Username
Set up username
Password
Set up password for each user. Password is 8-digits required and can
be mixed by letters and numbers with case-sensitive. Letters can be
mixed with capitals or lowercases.
Permissions
Set up Permissions for each user
Change Admin
Password
Change administrator‟s password
Picture
Change user‟s picture
4-5.1 Permission Setup
The Account Setup is set to provide individual user (maximum of 4 users) role-based
permissions, including access to Setup menu, Network operation, PTZ function, Playback,
Utility, Backup, Password expiry date and Mask on specific channels while playing back.
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
27
4-5.2 User Picture Setup
User can select picture wished to be changed to from hard drive.
4-6 NETWORKING SETUP
Item
Description
Connect type
Setup mode for network connection: (ADSL、DHCP、LAN、3G).
HTTP Setup
Enter to set up HTTP
DDNS Setup
Enter to set up DDNS
Mail Setup
Enter to set up mail
3G Setup
Enter to set up 3G network
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
28
4-6.1 NETWORKING SETUP
There are three ways to connect to the network as followed.
4-6.1.1 DHCP
When DHCP is selected, IP address will be assigned by DHCP server automatically.
4-6.1.2 LAN
Select LAN for network connection, the following information is required.
Item
Description
IP Address
Enter IP address provided by ISP
Subnet Mask
Enter IP address of Subnet Mask provided by ISP
Gateway
Enter IP address of Gate way provided by ISP
DNS
Enter DNS address provided by ISP.
(Note: The correct DNS address must be entered for DDNS function).
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
29
4-6.1.3 ADSL
Select ADSL for network connection, the following information is required.
Item
Description
User Name
Enter user name provided by ISP
Password
Enter password provided by ISP
4-6.1.4 3G
Select 3G for network connection, the following information is required.
Item
Description
Dial-up Number
Dial-up Number，Determined as the ISP
PIN
Enter SIM card password
APN
Enter ”internet”
Advance Setting
The advanced settings (Taiwan ISP outside)
iVIEW TECHNOLOGY HD-16 PRO User Manual Revision D
30
Item
Description
Enable
Enable advance setting
User Name
Enter ISP username
Password
Enter ISP password
IP Address
Enter the ISP provides a fixed IP address。
(if the client uses the Internet only need to enter a fixed IP)
PS：This feature currently only supports the Huawei 3G card
4-6.2 HTTP Setup
Item
Description
Enable HTTP
Server
Check to enable HTTP server. Users can remotely access into the
DVR over the network if the HTTP function is activated.
Port
Enter a valid port value from 1 up to 65000. The default value is 80.
Auto
Assign each channel with its maxima accessible fps
No.
Chanel number
Quality
Set up record quality. There are below basic, basic, normal, high,
highest
FPS
Set up record FPS
Loading...