www.cyberoam-iview.com
TM
Quick Start Guide
CR-iVU25NR
Version 1.0- 0126-09/06/2014
FRONT PANEL
Power
Outlet
Power
Switch
System Fan
BACK PANEL
Ethernet Ports
! Crossover Ethernet cable connects
to Management computer
! Straight-through Ethernet cable connects
to LAN through hub or switch
Console Port
Console cable connects here
USB Ports
2
UNDERSTANDING THE APPLIANCE
Power
LED
Appliance
Activity LED
DEFAULTS
* Username and Password are case sensitive
Web Admin Console
*
Username admin
*
Password cyberoam
Default Username & Password*
Default IP addresses
Ethernet Port IP Address one Z
Eth0 172.16.1.1/255.255.0.0 LAN
Eth1 IP via DHCP WAN
Package Contents
Checking the package contents - Check
that the package contents are complete.
! One Cyberoam Appliance
! One Serial Cable
! One AC Power Cable
! One Crossover Ethernet Cable
! One Cyberoam Quick Start Guide
! One Straight-through Ethernet Cable
If any items from the package are missing.
please contact Cyberoam Support at
support@cyberoam.com
CLI Console (SSH/Serial Connection)
By default Cyberoam iView is shipped with two
Administrator Users.
Administrator 1
Username
admin
Password admin
Administrator 2
Username root
Password admin
The appliance can only be deployed in a fixed location, such as a network rack.
3
CONNECTING CYBEROAM IVIEW
Ethernet connection
1. Connect one end of the Crossover Ethernet cable into Port Eth0 on the Front panel of the Appliance
and other end into the Ethernet Adapter port of Management computer. Change the IP address of the
management computer to 172.16.16.2, Gateway and DNS Server address to 172.16.16.16 and the
subnet mask to 255.255.255.0.
2. Connect one end of the Straight-through Ethernet cable to Port Eth1 on the Front panel of the appliance
and other end to your local network (LAN) switch or management network switch, from where all the
devices are accessible to Cyberoam iView.
3. Connect the AC Power connector into the Back panel of the Appliance and the other end into a Standard AC
receptacle and turn on the power.
4. Start your management computer. Following Appliance LEDs light up:
! Power - Green indicating that Appliance is ON
! HDD - Red indicating that hard disk is Active
Given below is the table containing various behaviors of appliance LED. Check with the given states before
proceeding.
5 Once you turn on the power, Cyberoam iView appliance booting process starts..
Appliance LED Behavior
State
Green
Off
Flashing Red
Off
Green (L), Amber (R)
Green (L), Green (R)
Off
Description
Cyberoam iView appliance is ON
Cyberoam iView appliance is OFF
Activity going on
No activity
Port is connected at 100Mbps
Port is connected at 1000Mbps
No link
LED
Power
HDD
Ports - Eth0,
Eth1, Eth2, Eth3
Loading...