Introduction
Thank you for choosing super mini True Wireless Stereo Bluetooth
headset. Fashionable appearance design, powerful functions and high
compatibility.
makes you achieve the wonderful experience of using wireless which
is your best choice in driving, indoor and outdoor.
Headphones with IP67 waterproof waterproof. It
3. The main body of the aluminum alloy wire drawing, super texture,
ultra-high vision, colorful
4. CVC noise Isolation technology reduces outside noises, enable c
learer microphone sound.
5. Built in 850mAh mobile power
6. CSR chip, low power consumption, multi compatibility
7. Stunning LED lights, can display different working conditions
8. Support call hands-free function
9. Optimized circuit design, the product has over-current protection,
short circuit protection function, no damage to equipment
Products Specification:
luetooth Version: V4.2, CSR64110.
B
Bluetooth Profiles: HSP, HFP, A2DP and AVRCP profiles.
Bluetooth transmission range: 10 m
Powerbank Battery: 850 mAh
Earphone battery: 45 mAh
Earphone Total Standby time: 2000 hours
Earphone charge time: 1 hour
Earphone Non-stop talking Time: 4 hours
Earphone tatal Talking time :100 hours
Powerbank input voltage: 5 V
Transmission frequency: 2402 – 2480MHZ
User Manual
This model is combined by”intelligent headset” and “intelligent
Powerbank”, it’s the best choice for mobile phone. It’s super mini,
not only can be used as a car Bluetooth headset, also can be
emergency powerbank. Portable design, you don’t need wear the
headset all the time, and can keep full battery state.
Bluetooth wireless technology allows you to easy and fast pairing
with smart phones, tablets and other Bluetooth enabled music
devices; True wireless Stereo paring via Bluetooth 4.1: Pairing 2
cordless earbuds wirelessly is now possible, making it the smallest
sterer Bluetooth headset on the market. Bluetooth 4.1 with advanced
audio decode technology enables wireless connections to your
smartphone and other Bluetooth devices and gives thses ultra-small
stereo wireless headphones umparalleled sound quality.
Products Features:
1. Sleek and Innovative Lipstick-Style Portable Charging System.
2. 2 in 1 Bluetooth headset and Bluetooth charger, necessary for
driving/work/indoors/outside sports.
Component:
1.Home-Key 6.Earplugs
2. LED indicator light 7. earphone Silicone
3. Power supply indicator lamp 8. Charging input
4. Charger output 9. conversation hole
5
.PowerKey
Warm prompt:: Please tear up the insulating membrane protector on
the earphone before using the Bluetooth headset.
Power on: Long press home key until the blue indicator light flash,
then you will hear voice prompt “power on”.
Power off: Long press Home-key until the red Indicator light on 2
second, then you will hear voice prompt “power off”.
Chinese/English Language switch: Long press the headset to the
shutdown (ater the long light red light)
Standby in no connection: Blue lights quickly flash 4 seconds twice.
Connected: Blue lights flash 4 seconds once.
Coming calls: Blue lights flash quickly.
Talking: Blue lights flash 4 seconds once.
Music: Blue lights flash 4 seconds once.
Disconnect: Blue lights quickly flash 4 seconds twice.
Calls:
press key once Note:Conversation by telephone is only the
main earphone
Reject Calls: Press home key about one seconds when call coming.
Recalling the last call: Double-click the home key.
Re-connection: Auto reconnect the paired phone once when turned
on (some mobiles need to manual to reconnect on the phone)
Bluetooth pairing (single ear connection)
1. Long press the headset to red and blue lights flashing
2. Open the phone Bluetooth, mobile search to S2 click on the phone
connection
Bluetooth Pairing (dual headset):
1. Two headphones to open the state, the two headphones
need 1-3 seconds of automatic interconnection (red light
flashes for the 2 time into the blue lights flashing)
2. One of the headphones is pressed to the red and blue lights.
Open the phone Bluetooth, mobilephone search to S2 click on
the phone connection. After the success of the headset into
the blue light flashing
3 After the headset is not power, please charge the boot, will
automatically connect the phone
Mobile phone Bluetooth to remove memory S2, press 1 - 2
4.
steps to re connect the operation can be
Note
If there is one earphone no sound.Turn off the phone, Turn off
two Bluetooth headset, boot Bluetooth headset , each click of a
headset into red and blue lights flashing, 1-3 seconds after the
two headset pairing successfully entered the blue light single
flash . Then press 1-2 steps to connect the phone
How to pair with 2 Bluttooth devices at a time?
1. Pairing and connect with A smart phone.
2. Turn off smart phone Bluetooth function.
3. Pairing and connect with B Smart phone.
4. Turn on A smart phone Bluetooth function.
5. Reconnect the A smart phone or manual to click to make sure
reconnect (pls make sure the smart phone have reconnect
function)
6. Already connect A and B smart phone at a time.
Chargers and batteries:
Before charging the headset please check if the specification of the
charger label is on accordance with the requirements. If charging
voltage is too high it is very likely to damage the power bank.
Warning:
This headset bulit-in non-removable rechargeable batteries. Please do
not take out the batteries from the headset, otherwise the headset will
be damaged. When the headset or power bank is not be use for a long
time, please put it in a dry place with good ventilation, and charge it
one time in two months.
Package includes:
2 Bluetooth Earbuds
1 Portable Charging Case
1 USB Charging Cable
3 Ear Tips: Small, Large
1 User Manual
Warranty: One year
Headset into the charging bin diagram
Headset schematic
After sales service
This headset adopts and power bank built-in non-removable
rechargeable batteries. Please do not try to take out the batteries from
the headset or powerbank in order to avoid damage to the headsets or
powerbank. When the headset or power bank is no using for a long
time, please put it in a dry place with good ventilation, and recharge
it every two months.
Regular problems and solutions
Problems
description
Can not Start
Can not
charge
Can not find
the headset
when
searching
pairing
devices
After sales service
Our company provides the guarantess in strict accordance with state
regulations:
The warranty period is one year.
Our products do not provide unsalable goods refund, replacement
services.
When met problems when using, please contact lacal salesagent to
Cause Solution
The power used up
Press home button
too short
Plug is not placed
well
Not enter pairing
state
The headset is not in
searching status
Mobile phone
bluetooth software
earror
Charge the battery fully
before use
Press the home key for 3
seconds to re-start the
headset
Check the plug well
Till the red/blue light flash
alternately
Set the headset on
searching status
Close the mobile phone
and re-start
deal with, for the following circumstances can not guaranteed free of
charge:
1. Fragile label altered tore.
2. Touched By liquid, Damaged by water.
3. Deformed seriously by outside force.
4. Damage be wrongly operation or bad reserved.
5. Damage caused by accident or carelessness.
6. Damage caused by commercial purpose and with non normal
using conditions.
7. Other situation similar to the above.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital de vice, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not
expressly approved by the party.
Responsible for compliance could void the user’s authority to
operate this equipment.
(Example‐ use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction
Loading...